(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Square HSS End Mills（Page7）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
391 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)
SANKO MFG
[Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 15 ～ 120 6 ～ 42 4 ～ 6 80 ～ 240 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,488,380 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more 
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-FPαL S-Coating Fine Pitch Long Flute
SANKO MFG
[Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 45 ～ 150 10 ～ 42 4 ～ 6 100 ～ 270 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 2,445,814 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αS S-Coating α Nick Short Flute
SANKO MFG
[Features]· Standard pitch type roughing endmill with TiCN coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 10 ～ 80 6 ～ 42 4 ～ 6 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,189,563 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αH S Coating α Nick Hard Type
SANKO MFG
Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 8 ～ 75 6 ～ 42 4 ～ 6 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,137,432 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αHM S-Coated Alpha Nick Hard Type Regular Blade
SANKO MFG
[Features]· Hard pitch type roughing endmill with S coating.· Ideal for heavy duty groove cutting.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 15 ～ 110 6 ～ 42 4 ～ 6 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,247,005 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-SUSα S Coating for Stainless Steel Groove Processing
SANKO MFG
Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 5 ～ 55 6 ～ 25 3 ～ 4 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○] Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,079,577 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
αHLS α Nick Roughing Hard Type Long-Shank Type
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. The long shank allows for machining in deep sections.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 20 ～ 50 45 ～ 75 16 ～ 42 4 ～ 6 200 ～ 320 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] Plane / Groove / Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 2,414,616 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUSα for Stainless Steel Groove Processing
SANKO MFG
[Features]· A flat nick type roughing end mill.· Ideal for grooving of stainless steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 5 ～ 55 6 ～ 25 3 ～ 4 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] Plane / Side / Groove / Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 786,374 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AL1T 1-Flute for Aluminum Frame
SANKO MFG
An end mill dedicated to aluminum sash processing.Tool Material: Cobalt High-Speed Steel, Work Material: AluminumCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pc.): 1Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 12 18 ～ 45 8 ～ 12 1 80 ～ 100 Aluminum[◎] Groove Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS 28 ～ 66 - From: 706,636 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Ideal for roughing aluminum material. Capable of machining grooves up to 1.5D.[Features]· Endmill dedicated to machining aluminum sashes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 40 15 ～ 65 6 ～ 32 3 ～ 4 70 ～ 185 Aluminum[◎] Side / Groove Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 832,121 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Endmill dedicated for key groove machining. The outer diameter tolerance is positive.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 5 ～ 25 6 ～ 25 2 50 ～ 95 general steel[○] / Quenched and tempered steel[○] / Aluminum[○] Groove Non-Coated Square Weak torsion (15 to 25˚) Available Cobalt HSS - - From: 466,225 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ASAHI TOOLS
Less undulation during side machining. 25° torsion seamless blade. Repolishing times are increased by adopting a sunken center.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 50 20 ～ 50 10 ～ 32 4 ～ 6 75 ～ 135 general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] Side / Groove Non-Coated Square Weak torsion (15 to 25˚) Available Alloy HSS - - From: 2,351,710 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HSP Long High Spiral End Mill G2
ASAHI TOOLS
The number of regrinding times is increased by adopting a long blade specification and a sinking sensor shape. "Machining application (machining shape)" side surface/groove," Tool material: "High speed steel, "Work material": General steel/Heat-treated steel/Cast iron/Aluminum/Copper/ Resin, "Helix angle": weak twist (1 to 29°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 60 10 ～ 200 10 ～ 42 4 ～ 6 90 ～ 280 general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] Side / Groove Non-Coated Square Weak torsion (15 to 25˚) Available Alloy HSS - - From: 3,885,596 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ASAHI TOOLS
Less undulation during side machining. 25° torsion seamless blade. Repolishing times are increased by adopting a sunken center.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 60 20 ～ 50 10 ～ 42 4 ～ 6 75 ～ 145 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] Side / Groove Non-Coated Square Weak torsion (15 to 25˚) Available Alloy HSS - - From: 2,351,710 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HSP Long High Spiral End Mill MA
ASAHI TOOLS
Long flute specifications.Adoption of the recessed center shape allows the number of regrinding increased.[Processing Application (Processing Shape)]Side/Groove, "Tool Material": High Speed Steel, "Work Material": General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin, "Helix Angle": Weak Helix (1 to 29°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 60 10 ～ 200 10 ～ 32 4 ～ 6 90 ～ 280 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] Side / Groove Non-Coated Square Weak torsion (15 to 25˚) Available Alloy HSS - - From: 3,885,596 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
EIKOSHA
Square end mill (HSS) with C-surfaces on the blade corners.[Features]· An end mill with 45° C-face on the corners.· Machinability is also improved thanks to adoption of twisted blade.[Applications]· End mill for processing chamfered surfaces, etc. to reinforce corners of the processed workpiece.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 16 8 ～ 32 6 ～ 16 2 45 ～ 100 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated For Keyway Standard torsion (30-40°) Available Cobalt HSS - - From: 968,083 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· 2-flute slotting end mill.· Straight blade shape.[Product Specifications]· Blade Shape: Right Blade Straight
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 60 4 ～ 75 4 ～ 32 2 35 ～ 160 general steel[○] - - Square No torsion - High-speed steel - - From: 635,195 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ultra Long Shank End Mill with 4 Flutes EXLSE4
EIKOSHA
[Features]· 4-flute ultra-long shank.· For deep engraving.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 20 ～ 50 30 ～ 100 20 ～ 42 4 180 ～ 300 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 3,631,640 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 10 8 ～ 15 8 ～ 10 2 60 ～ 65 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts - Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 489,995 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 28 6 ～ 55 6 ～ 25 2 ～ 4 55 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts AG Square Standard torsion (30-40°) - Powder high-speed steel - - From: 626,265 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Medium Roughing End Mill (TNAK-POWER)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 32 20 ～ 80 6 ～ 32 4 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○] Plane / Side / Groove TiAlN Roughing Standard torsion (30-40°) - Powder high-speed steel - - From: 1,130,086 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H.S.S 2-Flute Ball End Mill for Aluminum
DYC
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 7 6 2 51 Aluminum[○] - - Square - - Cobalt HSS - - From: 639,347 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
H.S.S 4-Flute End Mill for Roughing (EM11PM)
DYC
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 16 20 ～ 50 6 ～ 16 4 60 ～ 110 - - - Roughing - - Powder high-speed steel - - Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H.S.S 4-Flute End Mill for Roughing (EM06H9)
DYC
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 20 15 ～ 45 6 ～ 20 4 60 ～ 110 - - - Roughing - - Cobalt HSS - - From: 804,489 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H.S.S Roughing End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 16 ～ 112 6 ～ 108 4 ～ 6 48 ～ 214 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove TiCN / Non-Coated Roughing Standard torsion (30-40°) Available / None Cobalt HSS - Straight From: 560,237 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BS Handle 2-Flute End Mill SLE-BS (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3/4 ～ 50.8 25 ～ 65 - 2 127 ～ 200 - - Non-Coated Square - - High-speed steel - - From: 1,322,939 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BS Handle Spiral End Mill SPE-BS (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3/4 ～ 56 25 ～ 75 - 6 ～ 14 127 ～ 210 - - Non-Coated Square - - High-speed steel - - From: 1,322,939 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BS Handle Long 2-Flute End Mill LSLE-BS (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Flute No.] 2-Flute
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 60 ～ 150 - 2 162 ～ 285 - - Non-Coated Square - - High-speed steel - - From: 1,869,426 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BS Handle Long Spiral End Mill LSPE-BS (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Torsion Angle (θ)]· Weak Torsion (15°-25°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 60 ～ 150 - 6 ～ 12 162 ～ 285 - - Non-Coated Square Weak torsion (15 to 25˚) - High-speed steel - - From: 1,869,426 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MT Patter Spiral End Mill SPE-MT (SKH51)
TAIYO-TOOL
[Flute shape type]・ Square [Tool material type]· High-speed steel [Coating]・ Uncoated
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3/4 ～ 60 25 ～ 75 - 6 ～ 14 115 ～ 250.5 - - Non-Coated Square - - High-speed steel - - From: 1,567,855 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MT Pattern Long End Mill with 2 Flutes LSLE-MT (SKH51)
TAIYO-TOOL
[Flute shape type]・ Square [Tool material type]· High-speed steel [Coating]・ Uncoated [Number of flutes]・ 2-flute
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 40 ～ 150 - 2 115 ～ 288 - - Non-Coated Square - - High-speed steel - - From: 1,058,941 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MT Patter Long Spiral End Mill LSPE-MT (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Torsion Angle (θ)]· Weak Torsion (15°-25°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 14 ～ 45 60 ～ 150 - 6 ～ 10 150 ～ 290 - - Non-Coated Square Weak torsion (15 to 25˚) - High-speed steel - - From: 1,963,851 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TAIYO-TOOL
[Flute shape type]・ Square[Tool material type]· High-speed steel[Coating]・ Uncoated
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 38 ～ 100 30 ～ 75 - 10 ～ 18 - - - Non-Coated Square - - High-speed steel - - From: 3,735,508 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, Heavy, Extra-Long AGELHV
NACHI(FUJIKOSHI)
Adopts an ultra-long blade length. Capable of roughing of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 20 ～ 300 6 ～ 42 4 ～ 6 70 ～ 390 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Side - Square Standard torsion (30-40°) Available / None Cobalt HSS - - From: 2,017,900 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SG-FAX Heavy Extra-Long SGELHV
NACHI(FUJIKOSHI)
Adopts an ultra-long blade length. Capable of roughing of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 24 ～ 50 150 ～ 300 25 ～ 42 4 ～ 6 220 ～ 390 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Side TiCN Square Standard torsion (30-40°) Available / None Alloy HSS - - From: 16,386,415 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Square H.S.S End Mill (for Aluminum)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 16 14 ～ 30 10 ～ 16 2 60 ～ 95 Aluminum[◎] / Copper[○] / Resin[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 373,516 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
1-Flute End Mill for Aluminum Processing
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 6 14 8 1 60 Aluminum[◎] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square - - Cobalt HSS - - From: 528,678 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 30 45 ～ 90 10 ～ 25 4 100 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 366,610 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 32 - 6 ～ 32 4 ～ 6 68 ～ 186 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove TiCN / Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - Straight From: 491,283 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 12 53 12 3 110 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 1,093,788 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 26 15 ～ 90 6 ～ 25 2 60 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 364,538 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 15 ～ 125 6 ～ 42 4 ～ 6 60 ～ 215 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available / None Cobalt HSS - Straight From: 379,503 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute H.S.S End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 3.5 ～ 75 6 ～ 42 2 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 220,258 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Short H.S.S End Mill (Uncoated/TIN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 15 8 ～ 30 6 ～ 16 2 50 ～ 95 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 235,607 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Fine Pitch Long Roughing End Mill
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 25 40 ～ 90 10 ～ 25 4~6 90 ～ 170 general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○] Plane / Side / Groove AG Roughing Standard torsion (30-40°) - Powder high-speed steel - - From: 1,519,725 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | EIKOSHA | EIKOSHA | EIKOSHA | YG 1 | YG 1 | YG 1 | DYC | DYC | DYC | OSG KOREA CORP | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | TAIYO-TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG KOREA CORP | YG 1 | YG 1 | OSG KOREA CORP | YG 1 | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | YG 1 |
| Product SeriesDòng sản phẩm | S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill) | ||||||||||||||||||||||||||||||||||||||||||||
| From | 1,488,380 VND | 2,445,814 VND | 1,189,563 VND | 1,137,432 VND | 1,247,005 VND | 1,079,577 VND | 2,414,616 VND | 786,374 VND | 706,636 VND | 832,121 VND | 466,225 VND | 2,351,710 VND | 3,885,596 VND | 2,351,710 VND | 3,885,596 VND | 968,083 VND | 635,195 VND | 3,631,640 VND | 489,995 VND | 626,265 VND | 1,130,086 VND | 639,347 VND | 804,489 VND | 560,237 VND | 1,322,939 VND | 1,322,939 VND | 1,869,426 VND | 1,869,426 VND | 1,567,855 VND | 1,058,941 VND | 1,963,851 VND | 3,735,508 VND | 2,017,900 VND | 16,386,415 VND | 373,516 VND | 528,678 VND | 366,610 VND | 491,283 VND | 1,093,788 VND | 364,538 VND | 379,503 VND | 220,258 VND | 235,607 VND | 1,519,725 VND | |
| Days to ShipSố ngày giao hàng | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) | Same day or more | 6 Day(s) or more | 7 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) | 5 Day(s) | 4 Day(s) or more | 7 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 23 Day(s) |
| Blade diameter (D)(φ) | 5 ～ 50 | 10 ～ 50 | 5 ～ 50 | 5 ～ 50 | 6 ～ 50 | 3 ～ 30 | 20 ～ 50 | 3 ～ 30 | 6 ～ 12 | 6 ～ 40 | 3 ～ 25 | 8 ～ 50 | 10 ～ 60 | 8 ～ 60 | 10 ～ 60 | 3 ～ 16 | 1 ～ 60 | 20 ～ 50 | 5 ～ 10 | 2 ～ 28 | 6 ～ 32 | 2 | 6 ～ 16 | 6 ～ 20 | 6 ～ 50 | 3/4 ～ 50.8 | 3/4 ～ 56 | 10 ～ 50 | 10 ～ 50 | 3/4 ～ 60 | 5 ～ 50 | 14 ～ 45 | 38 ～ 100 | 3 ～ 50 | 24 ～ 50 | 8 ～ 16 | 5 ～ 6 | 10 ～ 30 | 6 ～ 32 | 12 | 3 ～ 26 | 3 ～ 50 | 1 ～ 50 | 3 ～ 15 | 8 ～ 25 |
| Blade length (ℓ)(mm) | 15 ～ 120 | 45 ～ 150 | 10 ～ 80 | 8 ～ 75 | 15 ～ 110 | 5 ～ 55 | 45 ～ 75 | 5 ～ 55 | 18 ～ 45 | 15 ～ 65 | 5 ～ 25 | 20 ～ 50 | 10 ～ 200 | 20 ～ 50 | 10 ～ 200 | 8 ～ 32 | 4 ～ 75 | 30 ～ 100 | 8 ～ 15 | 6 ～ 55 | 20 ～ 80 | 7 | 20 ～ 50 | 15 ～ 45 | 16 ～ 112 | 25 ～ 65 | 25 ～ 75 | 60 ～ 150 | 60 ～ 150 | 25 ～ 75 | 40 ～ 150 | 60 ～ 150 | 30 ～ 75 | 20 ～ 300 | 150 ～ 300 | 14 ～ 30 | 14 | 45 ～ 90 | - | 53 | 15 ～ 90 | 15 ～ 125 | 3.5 ～ 75 | 8 ～ 30 | 40 ～ 90 |
| Shank diameter (d)(mm) | 6 ～ 42 | 10 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 16 ～ 42 | 6 ～ 25 | 8 ～ 12 | 6 ～ 32 | 6 ～ 25 | 10 ～ 32 | 10 ～ 42 | 10 ～ 42 | 10 ～ 32 | 6 ～ 16 | 4 ～ 32 | 20 ～ 42 | 8 ～ 10 | 6 ～ 25 | 6 ～ 32 | 6 | 6 ～ 16 | 6 ～ 20 | 6 ～ 108 | - | - | - | - | - | - | - | - | 6 ～ 42 | 25 ～ 42 | 10 ～ 16 | 8 | 10 ～ 25 | 6 ～ 32 | 12 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 16 | 10 ～ 25 |
| Number of flutes(sheet) | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 4 | 4 ～ 6 | 3 ～ 4 | 1 | 3 ～ 4 | 2 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 2 | 2 | 4 | 2 | 2 ～ 4 | 4 | 2 | 4 | 4 | 4 ～ 6 | 2 | 6 ～ 14 | 2 | 6 ～ 12 | 6 ～ 14 | 2 | 6 ～ 10 | 10 ～ 18 | 4 ～ 6 | 4 ～ 6 | 2 | 1 | 4 | 4 ～ 6 | 3 | 2 | 4 ～ 6 | 2 | 2 | 4~6 |
| Overall Length (L)(mm) | 80 ～ 240 | 100 ～ 270 | 70 ～ 200 | 55 ～ 165 | 60 ～ 200 | 55 ～ 165 | 200 ～ 320 | 55 ～ 165 | 80 ～ 100 | 70 ～ 185 | 50 ～ 95 | 75 ～ 135 | 90 ～ 280 | 75 ～ 145 | 90 ～ 280 | 45 ～ 100 | 35 ～ 160 | 180 ～ 300 | 60 ～ 65 | 55 ～ 125 | 60 ～ 160 | 51 | 60 ～ 110 | 60 ～ 110 | 48 ～ 214 | 127 ～ 200 | 127 ～ 210 | 162 ～ 285 | 162 ～ 285 | 115 ～ 250.5 | 115 ～ 288 | 150 ～ 290 | - | 70 ～ 390 | 220 ～ 390 | 60 ～ 95 | 60 | 100 ～ 165 | 68 ～ 186 | 110 | 60 ～ 160 | 60 ～ 215 | 55 ～ 165 | 50 ～ 95 | 90 ～ 170 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] | Aluminum[◎] | Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○] | Aluminum[○] | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | - | - | - | - | - | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Copper[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Groove | Plane / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Groove | Side / Groove | Groove | Side / Groove | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove / Countersinking | - | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | - | - | - | Plane / Side / Groove | - | - | - | - | - | - | - | - | Side | Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove |
| Coating | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | - | AG | TiAlN | - | - | - | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiCN | Non-Coated | Non-Coated | Non-Coated | TiCN / Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiN / Non-Coated | AG |
| Blade shape type | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Roughing | Square | Square | Square | Square | Square | For Keyway | Square | Square | Square | Square | Roughing | Square | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Square | Roughing |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - | - | Standard torsion (30-40°) | - | - | - | Weak torsion (15 to 25˚) | - | - | Weak torsion (15 to 25˚) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | Available | - | - | - | - | - | - | Available / None | - | - | - | - | - | - | - | - | Available / None | Available / None | Available | - | - | Available | - | Available | Available / None | Available | Available | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Cobalt HSS | High-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | 28 ～ 66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | - | - | - | - | - | - | - | - | - | - | Straight | - | - | Straight | - | Straight | Straight | Straight | Straight | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
- 1-1/4
- 1.1
- 1.6
- 1.8
- 2
- 2.2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.5
- 7
- 7.5
- 8
- 9
- 10
- 10.5
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 38
- 39
- 40
- 45
- 48
- 50
- 53
- 55
- 56
- 57
- 58
- 60
- 63
- 65
- 67
- 68
- 70
- 75
- 80
- 85
- 90
- 95
- 100
- 105
- 106
- 110
- 112
- 115
- 120
- 122
- 125
- 130
- 140
- 145
- 150
- 160
- 180
- 200
- 212
- 250
- 300
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
- 1
- 2
- 3
- 4
- 4~6
- 5
- 6
- 8
- 10
- 12
- 14
- 16
- 18
-
Overall Length (L)(mm)
-
work material
-
Machining Application
-
Coating
-
Blade shape type
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy