(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Please ask MISUMI to check availability of this product.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
Japanese Only
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Shaft hole, keyway and push screw machining standardized.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.
Please ask MISUMI to check availability of this product.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
Japanese Only
JIS V-pulley external appearance
JIS V-pulley product standard
*Product standard conforms to JIS B1854-1987 "General Use V Pulleys."
Groove Shape | Nominal Size dm | α±0.5 (°) | lo | w1 | k | ko | e*1 | f | ||
---|---|---|---|---|---|---|---|---|---|---|
A | 100 Or Less | 34 | 9.2 | 11.95 | 4.5 | +0.2 0 | 8.0 | 15.0 ±0.4 | 10.0±1 | |
Between 100 And 125 | 36 | 12.12 | ||||||||
Over 125 | 38 | 12.30 | ||||||||
B | 160 Or Less | 34 | 12.5 | 15.86 | 5.5 | +0.2 0 | 9.5 | 19.0 ± 0.4 | 12.5±1 | |
Between 160 And 200 | 36 | 16.07 | ||||||||
Over 200 | 38 | 16.29 | ||||||||
C | 250 Or Less | 34 | 16.9 | 21.18 | 7.0 | +0.3 0 | 12.0 | 25.5±0.5 | 17.0±1 | |
Between 250 And 315 | 36 | 21.45 | ||||||||
Over 315 | 38 | 21.72 | ||||||||
D | 450 Or Less | 36 | 24.6 | 30.77 | 9.5 | +0.4 0 | 15.5 | 37.0±0.5 | 24.0 | +2 -1 |
Over 450 | 38 | 31.14 |
Groove dimensions (units: mm)
*1: e cumulative error of ±0.8 mm or less.
Nominal Size dm | Outer Circumference Vibration Tolerance | Rim Side Vibration Tolerance | Diameter Tolerance |
---|---|---|---|
118 Or Less | 0.15 (0.3) | 0.15(0.3) | ±0.4 (±0.6) |
125 Or More And 160 Or Less | 0.15 (0.4) | 0.15(0.4) | ±0.6 (±0.8) |
165 Or More And 224 Or Less | 0.2 (0.4) | 0.2(0.4) | ±0.6(±0.8) |
236 Or More And 300 Or Less | 0.25 (0.4) | 0.25(0.4) | ±0.6(±0.8) |
315 Or More And 450 Or Less | 0.3 (0.6) | 0.3(0.6) | ±0.9 (±1.2) |
475 Or More And 630 Or Less | 0.4 (0.6) | 0.4(0.6) | ±0.9(±1.2) |
710 Or More And 1,120 Or Less | 0.5 (0.8) | 0.5(0.8) | ±1.2 (±1.6) |
Outer circumference / rim side vibration tolerance value and outer diameter tolerance value (units: mm)
Parentheses enclose JIS B1854-1987 value.
Balance
Imbalance mass allowance on the outer circumference is 0.1% or 1 g of the pulley mass, whichever is larger. At a circumferential speed of 15 m/s, this corresponds to G16 of the JIS B 0905 "Rotating Machines - Balance Quality of Rigid Rotors."
Material/finish
Main body: FC200 or higher coating (NBK blue)
Convenient additional machining service standardized
Shaft hole, keyway, and set screw machining are available in standardized form. Easy set-up.
Extensive product range. 650 size
A: 146 size, B: 218 size, C: 212 size, D: 74 size. The 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used frequently in drive side mechanisms.
High quality exceeding the JIS standard
Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JIS B1854 - 1987 "General Use V Pulleys." Guaranteed imbalance tolerance on the outer circumference of 0.1% the pulley mass. Surface treated with a coating to improve corrosion resistance and provide a beautiful finish.
A highly reliable, economical, readily available, and easy to replace D type belt.
Part Number |
---|
315-D-4 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Nominal Diameter (mm) | Number of grooves (piece) | Type |
---|---|---|---|---|---|---|---|---|
20,724,975 VND | 1 Piece(s) | 9 Day(s) or more | 10 | 315 | 4 | 40U |
Part Number |
---|
Groove shape | D | Additional Work | No |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy