High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

MISUMI

[Features]
·High-speed steel roughing uncoated short flute length type with optimum pitch width for coarse finishing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model:Related Image

Specifications

High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model:Related Image

Model Number
RFEMS

Outer Diameter D	Flute Length ℓ	Overall Length L	Under Neck Angle θ	Shank Diameter d	Corner Chamfering C	Number of Flutes Z
Outer Diameter D	Flute Length ℓ	Overall Length L	Under Neck Angle θ	Shank Diameter d	Corner Chamfering C	Number of Flutes Z
5	13	57	15°	6	—	3
6	13	57	—	6	—	3
7	16	66	15°	10	—	3
8	19	69	15°	10	—	4
9	19	69	15°	10	—	4
10	22	72	—	10	—	4
11	22	79	15°	12	0.2 ~ 0.7	4
12	26	83	—	12	0.2 ~ 0.7	4
13	26	83	—	12	0.2 ~ 0.7	4
14	26	83	—	12	0.2 ~ 0.7	4
15	26	83	—	12	0.2 ~ 0.7	4
16	32	92	—	16	0.3 ~ 0.9	4
17	32	92	—	16	0.3 ~ 0.9	4
18	32	92	—	16	0.3 ~ 0.9	4
19	32	92	—	16	0.3 ~ 0.9	4
20	38	104	—	20	0.3 ~ 0.9	4
22	38	104	—	20	0.3 ~ 0.9	4
25	45	121	—	25	0.3 ~ 0.9	4
28	45	121	—	25	0.3 ~ 0.9	5
30	45	121	—	25	0.3 ~ 0.9	5
32	53	133	—	32	0.3 ~ 0.9	6
35	53	133	—	32	0.3 ~ 0.9	6
40	63	143	—	32	0.3 ~ 0.9	6
45	63	143	—	42	0.3 ~ 0.9	6
50	75	177	—	42	0.3 ~ 0.9	6

For Cutting Conditions, Refer to >>Click here.