How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(18 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LBHC6LUU

Inscribed Circle Dia. dr Overall Length L Outer Cylinder Surface Treatment Outer Dia. D Eccentricity CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
6

8

10

12

16

20

25

30

40
ClearTrống
Overall Length L(mm)
35

45

55

57

70

80

112

123

151
ClearTrống
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
ClearTrống
Outer Dia. D(Ø)
12

15

19

21

28

32

40

45

60
ClearTrống
Eccentricity(µm)
0.04

0.050
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

14 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Compact, Center Flanged Linear Bushings, Double

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Part Number :

E-LBHC6LUU SALE

E-LBHC8LUU SALE

E-LBHC10LUU SALE

E-LBHC12LUU SALE

E-LBHC16LUU SALE

E-LBHC20LUU SALE

E-LBHC25LUU SALE

E-LBHC30LUU SALE

E-LBHC40LUU SALE

E-LBHCM6LUU SALE

E-LBHCM8LUU SALE

E-LBHCM10LUU SALE

E-LBHCM12LUU SALE

E-LBHCM16LUU SALE

E-LBHCM20LUU SALE

E-LBHCM25LUU SALE

E-LBHCM30LUU SALE

E-LBHCM40LUU SALE

E-LBHC6LUU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

Compact, Center Flanged Linear Bushings, Double
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Support Shaft Diameter Minimum/Maximum (mm.): 6 and 40
● Overall Length Minimum/Maximum (mm.): 35 and 151
● Flange Shape : Compact Center Flanged
● Ball Recirculating Type : Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
See more ...

Economy Compact Center Flanged Double Linear Bushing

Space-SavingReliableEconomical

- Space-saving design with center flange.

- Supports a range of shaft diameters

- High durability and low noise performance.

- Suitable for various industrial machinery.

- Economical solution with reliable performance.

Economy Compact Center Flanged Double Linear Bushing

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Linear Bushings

The flanged Linear Bushings, linear bearing integrates the linear bearing with the support, which is compact in structure and easy to assemble to the mechanism accurately and simply.
The middle flanged linear bearing allows workpieces to be installed near the center of the linear bearing body, ensuring good balance on two sides of the flange, as well as decentralized load space.

Product Features of Linear Bushings

Linear Bushings, Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Linear Bushings Feature 1: Effective utilization of space. The combination of the guide shaft and the linear bearing enables effective use of space, suitable for small mechanism designs.
Linear Bushings Feature 2: Selection can be made based on operating environment. The outer cylinder of the linear bearing is made of steel or stainless steel, and the retainer is made of stainless steel for harsh conditions or resin for low noise.
Linear Bushings Feature 3: Good interchangeability. Linear bearings have good interchangeability because they can be used with shafts randomly.
Linear Bushings Feature 4: Appropriate specifications can be selected according to the conditions of use.
Linear Bushings Feature 5: More cost effective than the linear guide.

Dimensional Drawing of Linear Bushings

dr16～30:D＋6，dr35:D＋8，dr40:D＋10

Specifications Overview of Linear Bushings

■Material Specification Table of Linear Bushings

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material	Operating Environment Temperature	Accessories
Equivalent to SUJ2	58HRC～	No Surface Treatment Electroless Nickel Plating	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber (-20 to 120℃)

Usage Method of Linear Bushings

Product Drawings of Linear Bushings	Instructions for use Linear Bushings
	When the Linear Bushings is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions of Linear Bushings

■ Linear Bushings Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
for details. ③ Recommended grease filling interval: Usually every 6 months.
④When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
⑤ When the linear bearing is subjected to large moment load (eccentric load), one piece of single liner type is not applicable, so it is recommended to use one piece of double liner type or multiple pieces of single liner type.

■ Linear Bushings Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Application Industries of Linear Bushings

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Related Products of Linear Bushings

Compact Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Round Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Square Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LBHC6LUUSALE
E-LBHC8LUUSALE
E-LBHC10LUUSALE
E-LBHC12LUUSALE
E-LBHC16LUUSALE
E-LBHC20LUUSALE
E-LBHC25LUUSALE
E-LBHC30LUUSALE
E-LBHC40LUUSALE
E-LBHCM6LUUSALE
E-LBHCM8LUUSALE
E-LBHCM10LUUSALE
E-LBHCM12LUUSALE
E-LBHCM16LUUSALE
E-LBHCM20LUUSALE
E-LBHCM25LUUSALE
E-LBHCM30LUUSALE
E-LBHCM40LUUSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Cylinder Surface Treatment	Outer Dia. D (Ø)	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)
121,316 VND 103,119 VND	1 Piece(s)	Available	Same day	6	35	No Surface Treatment	12	0.04	324	529
121,860 VND 103,581 VND	1 Piece(s)	Available	Same day	8	45	No Surface Treatment	15	0.04	431	784
127,681 VND 108,529 VND	1 Piece(s)	Available	Same day	10	55	No Surface Treatment	19	0.04	588	1100
130,838 VND 111,212 VND	1 Piece(s)	Available	Same day	12	57	No Surface Treatment	21	0.04	657	1200
152,846 VND 137,561 VND	1 Piece(s)	Available	Same day	16	70	No Surface Treatment	28	0.04	1230	2350
159,660 VND 143,694 VND	1 Piece(s)	Available	14 Day(s)	20	80	No Surface Treatment	32	0.04	1400	2740
234,574 VND 199,388 VND	1 Piece(s)	Available	Same day	25	112	No Surface Treatment	40	0.04	1560	3140
293,110 VND 249,144 VND	1 Piece(s)	Available	Same day	30	123	No Surface Treatment	45	0.04	2490	5490
498,650 VND 423,853 VND	1 Piece(s)	Available	Same day	40	151	No Surface Treatment	60	0.050	3430	8040
144,835 VND 123,110 VND	1 Piece(s)	Available	Same day	6	35	[Surface Treatment] Electroless Nickel Plating	12	0.04	324	529
145,461 VND 123,642 VND	1 Piece(s)	Available	Same day	8	45	[Surface Treatment] Electroless Nickel Plating	15	0.04	431	784
152,037 VND 129,231 VND	1 Piece(s)	Available	Same day	10	55	[Surface Treatment] Electroless Nickel Plating	19	0.04	588	1100
155,970 VND 132,575 VND	1 Piece(s)	Available	Same day	12	57	[Surface Treatment] Electroless Nickel Plating	21	0.04	657	1200
181,874 VND 154,593 VND	1 Piece(s)	Available	Same day	16	70	[Surface Treatment] Electroless Nickel Plating	28	0.04	1230	2350
189,238 VND 160,852 VND	1 Piece(s)	Available	Same day	20	80	[Surface Treatment] Electroless Nickel Plating	32	0.04	1400	2740
276,974 VND 235,428 VND	1 Piece(s)	Available	Same day	25	112	[Surface Treatment] Electroless Nickel Plating	40	0.04	1560	3140
346,570 VND 294,585 VND	1 Piece(s)	Available	Same day	30	123	[Surface Treatment] Electroless Nickel Plating	45	0.04	2490	5490
587,565 VND 499,430 VND	1 Piece(s)	Available	Same day	40	151	[Surface Treatment] Electroless Nickel Plating	60	0.050	3430	8040

Loading...Tải…

Dimensional Drawing

dr16～30:D＋6，dr35:D＋8，dr40:D＋10

Specification Table

■Material Specification Table

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material	Operating Environment Temperature	Accessories
Equivalent to SUJ2	58HRC～	No Surface Treatment Electroless Nickel Plating	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber (-20 to 120℃)

■Dimension Specification Table

dr		D Tolerance			L		ℓ	H	T	d	d₁	t	F	A	Lateral misalignment	Number of ball rows	* Perpendicularity	Basic Rated Load		Static allowable (N·m)	Weight (g)
I.D.	Tolerance		No Surface Treatment	With Surface Treatment		Tolerance	ℓ	H	T	d	d₁	t	F	A	Lateral misalignment	Number of ball rows	* Perpendicularity	C (Dynamic) N	Co (Static) N	Static allowable (N·m)	Flanged Type
6	0 -0.010	12	0 -0.025	0 -0.020	35	±0.3	15	28	5	3.5	6	3.1	-	20	0.030	4	0.04	324	529	2.18	28
8		15			45		20	32	5	3.5	6	3.1	-	24				431	784	4.31	47
10		19			55		24.5	40	6	4.5	7.5	4.1	-	29				588	1100	7.24	90
12		21			57		25.5	42					-	32				657	1200	10.9	102
16		28			70		32	48					22	31		5		1230	2350	19.7	182
20	0 -0.012	32	0 -0.035	0 -0.030	80		36	54	8	5.5	9	5.1	24	36	0.040	5		1400	2740	26.8	247
25		40			112		52	62	8	5.5	9	5.1	32	40		6		1560	3140	43.4	525
30		45			123		56.5	74	10	6.6	11	6.1	35	49				2490	5490	82.8	645
40	0 -0.014	60			151		69	96	13	9	14	8.1	45	64	0.050		0.05	3430	8040	147	1423

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.

* mark shows the verticality between Part D and the flange mounting surface.

For information on the flanged height adjusting ring, please refer to the

Adjusting Ring.

Basic InformationThông tin cơ bản

Type	Flange	Flange Type	Center Flanged	Style	Standard
Outer Cylinder Material	SUJ2 Equivalent	Lubrication Type	Not Provided	Accuracy	High Grade
Ball Recirculating Type	Double	Motion	Linear	Types	Center Flanged
Length	Double	Flange Shape	Compact Flange	Ball Material	Equivalent to SUJ2
Retainer Material	Resin	Seal	Provided	Greased Filled	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh