What brand is the linear bearing of FA?

The linear bearing of FA is MISUMI brand.

Is there a product stamp on the linear bearing?

There is no stamp on the product body, and the product model is on the packaging box.

How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

What is the difference between the single liner type and the double liner type of linear bearing of FA?

Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.

When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?

The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to have clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.

How to deal with oil leakage in the received linear bearing?

Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it before use and apply grease after drying.

Can the linear bearing rotate?

The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(34 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LBH5UU

Inscribed Circle Dia. dr Overall Length L Outer Cylinder Surface Treatment Outer Dia. D Ball Recirculating Type Eccentricity Holder Material Style of Mounting Hole type Length CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
5

6

8

10

12

13

16

20

25

30

35

40

50
ClearTrống
Overall Length L(mm)
15

19

24

29

30

32

35

37

42

45

55

57

59

61

64

70

80

100

112

123

135

151

192
ClearTrống
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
ClearTrống
Outer Dia. D(Ø)
10

12

15

19

21

23

28

32

40

45

52

60

80
ClearTrống
Ball Recirculating Type
- Single
- Double
ClearTrống
Eccentricity(µm)
0.02

0.024

0.028

0.03

0.04

0.045

24

30

40
ClearTrống
Holder Material
- Opposite couterbored
- Standard
ClearTrống
Style of Mounting Hole
- Opposite Couterbored Hole
- Standard Counterbored Hole
ClearTrống
type
- C-LBH
- C-LBHM
- C-LBHZ
- E-LBH
- E-LBHL
- E-LBHM
- E-LBHZ
ClearTrống
Length
- Single
- Double
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Compact Flanged Linear Bushings, Single / Double / Opposite Counterbored Hole

Until 31/12/2024
Volume Discount

Check FAQ of this product (8 items)

Brand :

MiSUMi Economy

Part Number :

E-LBH5UU SALE

E-LBH6UU SALE

E-LBH8UU SALE

E-LBH10UU SALE

E-LBH12UU SALE

E-LBH13UU SALE

E-LBH16UU SALE

E-LBH20UU SALE

E-LBH25UU SALE

E-LBH30UU SALE

E-LBH35UU SALE

E-LBH40UU SALE

E-LBH50UU SALE

E-LBHM6UU SALE

E-LBHM8UU SALE

E-LBHM10UU SALE

E-LBHM12UU SALE

E-LBHM13UU SALE

E-LBHM16UU SALE

E-LBHM20UU SALE

E-LBH5UU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Note: When ordering item E-LB**UU, you may receive product with package printed C-LM**UU. This is Misumi's product code convertion only, there is no spec difference between these 2 items

Product Description

Compact Flanged Linear Bushings, Single / Double / Opposite Counterbored Hole
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Features]
● Support Shaft Diameter Minimum/Maximum (mm.): 5 and 50
● Overall Length Minimum/Maximum (mm.): 15 and 192
● Shape : Double-sided Cutting Flange
● Ball Recirculating Type : Single or Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
See more ...

Economy Compact Flanged Linear Bushing

Compact Space-Saving Flexible

- Compact design for space-saving applications.

- Single and double ball recirculating options for flexibility.

- Supports a range of shaft diameters

- Optional surface treatments for enhanced rust protection.

- Ideal for robotic equipment and precision machinery.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Dimensional Drawing of Linear Bushings

This product of Linear Bushings is delivered at the initial stage, the color of the packing may be inconsistent with the photo, which shall be subject to the actual product.

The flange part of this product of Linear Bushings is not heat-treated, and there may be bumps and bruises.

Specification Table of Linear Bushings

■Material Specification Table of Linear Bushings

Linear Bushings Housing			Linear Bushings Ball	Linear Bushings Retainer	Linear Bushings Operating environment temperature	Linear Bushings Accessories
Material	Hardness	Surface Treatment	Material	Material	Linear Bushings Operating environment temperature	Linear Bushings Accessories
Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	-20~80℃	Seal packing Material Nitrile Rubber

If there are requirements for rust prevention, give priority to products of Linear Bushings with surface treatment of electroless nickel plating or those with low-temperature hard chromium plating.

■ Dimension Specification Table of Linear Bushings

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LBH5UUSALE
E-LBH6UUSALE
E-LBH8UUSALE
E-LBH10UUSALE
E-LBH12UUSALE
E-LBH13UUSALE
E-LBH16UUSALE
E-LBH20UUSALE
E-LBH25UUSALE
E-LBH30UUSALE
E-LBH35UUSALE
E-LBH40UUSALE
E-LBH50UUSALE
E-LBHM6UUSALE
E-LBHM8UUSALE
E-LBHM10UUSALE
E-LBHM12UUSALE
E-LBHM13UUSALE
E-LBHM16UUSALE
E-LBHM20UUSALE
E-LBHM25UUSALE
E-LBHM30UUSALE
E-LBHM35UUSALE
E-LBHM40UUSALE
E-LBHM50UUSALE
E-LBHZ6UUSALE
E-LBHZ8UUSALE
E-LBHZ10UUSALE
E-LBHZ12UUSALE
E-LBHZ13UUSALE
E-LBHZ16UUSALE
E-LBHZ20UUSALE
E-LBHZ25UUSALE
E-LBHZ30UUSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Cylinder Surface Treatment	Outer Dia. D (Ø)	Ball Recirculating Type	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)	Holder Material	Style of Mounting Hole
82,205 VND 73,985 VND	1 Piece(s)	Available	Same day	5	15	No Surface Treatment	10	Single	Single	0.02	167	206	-0.015	Standard	Standard Counterbored Hole
57,315 VND 51,584 VND	1 Piece(s)	Available	Same day	6	19	No Surface Treatment	12	Single	Single	24	206	265	-0.015	-	Standard Counterbored Hole
57,955 VND 52,160 VND	1 Piece(s)	Available	Same day	8	24	No Surface Treatment	15	Single	Single	24	265	380	-0.015	-	Standard Counterbored Hole
52,569 VND 47,312 VND	1 Piece(s)	Available	Same day	10	29	No Surface Treatment	19	Single	Single	24	372	549	-0.015	-	Standard Counterbored Hole
53,113 VND 47,802 VND	1 Piece(s)	Available	Same day	12	30	No Surface Treatment	21	Single	Single	24	412	598	-0.018	-	Standard Counterbored Hole
75,998 VND 64,598 VND	1 Piece(s)	Available	Same day	13	32	No Surface Treatment	23	Single	Single	0.024	510	784	-0.018	Standard	Standard Counterbored Hole
57,474 VND 51,727 VND	1 Piece(s)	Available	Same day	16	37	No Surface Treatment	28	Single	Single	24	775	1180	-0.018	-	Standard Counterbored Hole
64,705 VND 58,235 VND	1 Piece(s)	Available	Same day	20	42	No Surface Treatment	32	Single	Single	30	882	1370	-0.021	-	Standard Counterbored Hole
90,700 VND 81,630 VND	1 Piece(s)	Available	Same day	25	59	No Surface Treatment	40	Single	Single	30	980	1570	-0.021	-	Standard Counterbored Hole
128,547 VND 109,265 VND	1 Piece(s)	Available	Same day	30	64	No Surface Treatment	45	Single	Single	30	1570	2740	-0.021	-	Standard Counterbored Hole
233,578 VND 198,541 VND	1 Piece(s)	Available	Same day	35	70	No Surface Treatment	52	Single	Single	0.04	1670	3140	-0.028	Standard	Standard Counterbored Hole
262,766 VND 223,351 VND	1 Piece(s)	Available	Same day	40	80	No Surface Treatment	60	Single	Single	0.04	2160	4020	-0.028	Standard	Standard Counterbored Hole
695,926 VND 591,537 VND	1 Piece(s)	Available	Same day	50	100	No Surface Treatment	80	Single	Single	0.04	3820	7940	-0.03	Standard	Standard Counterbored Hole
79,877 VND 71,889 VND	1 Piece(s)	Available	Same day	6	19	[Surface Treatment] Electroless Nickel Plating	12	Single	Single	0.024	206	265	-0.015	Standard	Standard Counterbored Hole
80,653 VND 72,588 VND	1 Piece(s)	Available	Same day	8	24	[Surface Treatment] Electroless Nickel Plating	15	Single	Single	0.024	265	380	-0.015	Standard	Standard Counterbored Hole
85,311 VND 76,780 VND	1 Piece(s)	Available	Same day	10	29	[Surface Treatment] Electroless Nickel Plating	19	Single	Single	0.024	372	549	-0.018	Standard	Standard Counterbored Hole
87,640 VND 78,876 VND	1 Piece(s)	Available	Same day	12	30	[Surface Treatment] Electroless Nickel Plating	21	Single	Single	0.024	412	598	-0.018	Standard	Standard Counterbored Hole
87,640 VND 74,494 VND	1 Piece(s)	Available	Same day	13	32	[Surface Treatment] Electroless Nickel Plating	23	Single	Single	0.024	510	784	-0.018	Standard	Standard Counterbored Hole
92,295 VND 83,066 VND	1 Piece(s)	Available	Same day	16	37	[Surface Treatment] Electroless Nickel Plating	28	Single	Single	0.024	775	1180	-0.018	Standard	Standard Counterbored Hole
100,837 VND 90,753 VND	1 Piece(s)	Available	Same day	20	42	[Surface Treatment] Electroless Nickel Plating	32	Single	Single	0.03	882	1370	-0.021	Standard	Standard Counterbored Hole
144,307 VND 122,661 VND	1 Piece(s)	Available	Same day	25	59	[Surface Treatment] Electroless Nickel Plating	40	Single	Single	0.03	980	1570	-0.021	Standard	Standard Counterbored Hole
174,584 VND 157,126 VND	1 Piece(s)	Available	Same day	30	64	[Surface Treatment] Electroless Nickel Plating	45	Single	Single	0.03	1570	2740	-0.021	Standard	Standard Counterbored Hole
318,658 VND 270,859 VND	1 Piece(s)	Available	Same day	35	70	[Surface Treatment] Electroless Nickel Plating	52	Single	Single	0.04	1670	3140	-0.025	Standard	Standard Counterbored Hole
322,539 VND 274,158 VND	1 Piece(s)	Available	Same day	40	80	[Surface Treatment] Electroless Nickel Plating	60	Single	Single	0.04	2160	4020	-0.025	Standard	Standard Counterbored Hole
874,468 VND 743,298 VND	1 Piece(s)	Available	Same day	50	100	[Surface Treatment] Electroless Nickel Plating	80	Single	Single	0.04	3820	7940	-0.028	Standard	Standard Counterbored Hole
93,849 VND 84,464 VND	1 Piece(s)	Available	Same day	6	19	No Surface Treatment	12	Single	Single	0.024	206	265	-0.015	Opposite couterbored	Opposite Couterbored Hole
93,849 VND 79,772 VND	1 Piece(s)	Available	Same day	8	24	No Surface Treatment	15	Single	Single	0.024	265	380	-0.015	Opposite couterbored	Opposite Couterbored Hole
100,062 VND 85,053 VND	1 Piece(s)	Available	Same day	10	29	No Surface Treatment	19	Single	Single	0.024	372	549	-0.03	Opposite couterbored	Opposite Couterbored Hole
104,717 VND 89,009 VND	1 Piece(s)	Available	Same day	12	30	No Surface Treatment	21	Single	Single	0.024	412	598	-0.018	Opposite couterbored	Opposite Couterbored Hole
107,046 VND 90,989 VND	1 Piece(s)	Available	Same day	13	32	No Surface Treatment	23	Single	Single	0.024	510	784	-0.018	Opposite couterbored	Opposite Couterbored Hole
117,138 VND 99,567 VND	1 Piece(s)	Available	Same day	16	37	No Surface Treatment	28	Single	Single	0.024	775	1180	-0.018	Opposite couterbored	Opposite Couterbored Hole
121,795 VND 103,526 VND	1 Piece(s)	Available	Same day	20	42	No Surface Treatment	32	Single	Single	0.03	882	1370	-0.021	Opposite couterbored	Opposite Couterbored Hole
152,072 VND 129,261 VND	1 Piece(s)	Available	Same day	25	59	No Surface Treatment	40	Single	Single	0.03	980	1570	-0.021	Opposite couterbored	Opposite Couterbored Hole
169,924 VND 144,435 VND	1 Piece(s)	Available	Same day	30	64	No Surface Treatment	45	Single	Single	0.03	1570	2740	-0.021	Opposite couterbored	Opposite Couterbored Hole

Loading...Tải…

■ Test conditions
•Linear bearing (inner diameter 16) is matched with MISUMI guide shaft (PSFJ) to apply 63kg load and walk for 30km, and confirm the product damage and sliding noise.
Product Feature Drawings

■ Test results
The economy series product ensures smooth sliding of steel ball, which have good durability and low noise
Product Feature Drawings

*Products circulating on the market are similar products randomly purchased by our company from online or offline markets
*The test data are obtained through testing by our company, which are for reference only

Usage Method

Product Drawings	Instructions for use
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions

■ Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease. ③ Recommended grease filling interval: Usually every 6 months.
④ When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
⑤ When the linear bearing is subjected to large moment load (eccentric load), one piece of single liner type is not applicable, so it is recommended to use one piece of double liner type or multiple pieces of single liner type.

■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Example of Use

Equipment Name:
Conveying direction change mechanism

Design Purpose:
The conveying direction of the workpiece conveyed by the conveyor belt is 90°. Change the direction to move.

Parts Application Description:
By matching with the air cylinder, the conveying direction of the workpiece can be changed.

Application Industries

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Related Products

Guide shaft Straight bar type	(Economy series) Linear bearing Standard type Single liner type	Shaft Collar Slit

Typical model: SFJ20-75	Typical model: C-LM8UU	Typical model: SCS8-10

Basic InformationThông tin cơ bản

Type	Flange	Flange Type	Standard Flange	Style	Standard
Outer Cylinder Material	SUJ2 Equivalent	Lubrication Type	Not Provided	Accuracy	Standard Grade
Motion	Linear	Types	Standard Flange	Flange Shape	Double-sided Cutting Flange
Ball Material	SUJ2 Equivalent	Retainer Material	Plastic	Seal	Provided
Greased Filled	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What brand is the linear bearing of FA?: Answer:Answer: The linear bearing of FA is MISUMI brand.
Question:Question: Is there a product stamp on the linear bearing?: Answer:Answer: There is no stamp on the product body, and the product model is on the packaging box.
Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.
Question:Question: What is the difference between the single liner type and the double liner type of linear bearing of FA?: Answer:Answer: Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.
Question:Question: When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?: Answer:Answer: The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to have clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.
Question:Question: How to deal with oil leakage in the received linear bearing?: Answer:Answer: Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it before use and apply grease after drying.
Question:Question: Can the linear bearing rotate?: Answer:Answer: The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

Check other FAQ (5 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Outer Cylinder Surface Treatment

Outer Dia. D(Ø)

Ball Recirculating Type

Eccentricity(µm)

Holder Material

Style of Mounting Hole

type

Length

CADCAD