(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

  • Viewed
    Sản phẩm
    đã xem
    최근 본
    查看产品 查看產品
  • My
    Linh kiện
    của tôi
    나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
My Components
Cart item(s)
  • Thông báo điều chỉnh giảm giá bán linh kiện Economy series: Giảm 30% toàn bộ sản phẩm và giảm thêm theo số lượng. Xem chi tiết.
    Notice of the price adjustment for Economy series products: Decrease by 30% and further discount by volume. See more.
  • Thông báo về thay đổi thuế suất 8% từ 1/7/2023 đến 31/12/2023. Xem chi tiết.
    Notice about the application of 8% tax policy from 1/7/2023 to 31/12/2023. See more.

Shaft Collars Clamp Type For Bearing Inner Mount

Shaft Collars Clamp Type For Bearing Inner Mount
  • Volume Discount
You can add up to 6 items per a category to the compare list.

Part Number :
    • From :
  • Order Qty :
  • Total Price :
  • Days to ship :

Select part number to Order Now/ Add to Cart

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview
It can be used as the inner ring pressing ring of bearing. Compared with the special nut for the bearing, special tools are not required and the cost performance is high.
MISUMI Original Specifications: the outer ring is additionally grooved, and aluminum material can realize high holding force.
Product Feature
Feature 1: the shaft collar is fixed on one side of the rotating part and used for axial fixing of the rotating part.
Feature 2: the shaft collar is fixed at one end of the rotary shaft, and the boss part is tightly attached to inner ring of the bearing to play the role of bearing positioning.
Feature 3: two shaft collars are clamped and fixed at both ends of the part on the shaft, and the front and rear positions of the part are adjustable, so that the two shaft collars are used for axial positioning of the part.
Feature 4: the slit type has stronger fastening force than the set screw type shaft collar.
Feature 5: aluminum material is adopted to meet the lightweight requirements.
Dimensional Drawing
misumi scsbn MISUMI shaft collar dowel rings D3 to D50 Size standards drawing

Specifications Overview
Type Material Surface Treatment AccessoriesD (mm)Ds selection (mm)B (mm)
C-SCSBNAW6000 series aluminumClear Anodized1 hexagon socket head bolt (equivalent to SCM435)6~309~359~17.5

Usage Method
misumi scsb MISUMI shaft collar dowel rings D3 to D40 Use teachingThe bearing is fixed at one end of the shaft by a shaft collar, and the boss part abuts against the inner ring of bearing to play the role of positioning the bearing.

Example of Use
misumi sc MISUMI shaft collar snap rings D3 to D40 Complete examples of use
■Mechanism name
Cleaning mechanism with adjustable spray angle.

■Mechanism functions
1. A mechanism for washing the workpieces sent from the conveyor with a nozzle.
2. The spray angle can be easily adjusted by the hand wheel and can be fixed at any angle.

■Function of shaft collar for bearing mounting
Fixed to one end of the rotary shaft, it abuts against the inner ring of the bearing to position the bearing.

Related Industries
Smart phone Medical Electronic & Electrical Appliances
misumi MISUMI shaft collar For bearing mounting For smart phone industry misumi shaft collar set screw For medical use misumi fastening ring jacking screw For electronics industry
Solar cell Semiconductor Lithium battery
MISUMI set collars set screw For solar cell industry misumi MISUMI shaft collar shaft rings D3 to D40 For semiconductor industry misumi scb MISUMI shaft collar clamps D3 to D40 For lithium battery industry

① If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of SUS304.
② Because the shaft collar is not hard, scars easily occur after collision. Keep it properly after removing the external package.

Related Products
(Economy series) Shaft Collars Set Screw Type For Bearing Fixing (Economy series) Rotary shaft Straight bar type (Economy series) Linear guide shaft
misumi MISUMI shaft collar bushings D3 to D40 Rotary shaft fitting misumi MISUMI shaft collar snap rings D3 to D40 Optical axis guide shaft fitting misumi MISUMI set screw shaft collars D3 to D40 Timing pulley fitting
Typical model: SCSBR10-14 Typical model: PSFHR20-300 Typical model: CPSFJT20-325-M8
Advantages: matching with shafts, complete variety Advantages: various alterations, short delivery time Advantages: economy series products, min. shipped in 1 day at the earliest
Dimensional Drawing
misumi MISUMI shaft collar dowel rings D3 to D40 Specification table

Specification Table
Please order after selecting part number and parameters according to the selection steps to .
 Part Number (Type·D)Ds
Part NumberDs
(Coarse Thread)

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
    Incomplete part number.
    Please use left hand selections to complete a part number.
Part Number
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngI.D. O.D. Width

40,941 VND

1 Piece(s) Available Same day 6209

46,799 VND

1 Piece(s) Available Same day 82511.5

51,905 VND

1 Piece(s) Available 6 Day(s) 103011.5

51,900 VND

1 Piece(s) Available 6 Day(s) 123011.5

57,608 VND

1 Piece(s) Available 6 Day(s) 153411.5

69,108 VND

1 Piece(s) Available Same day 204014

77,099 VND

1 Piece(s) Available Same day 254514

67,701 VND

1 Piece(s) Available Same day 305517.5


  1. 1

Basic InformationThông tin cơ bản

Fastening Method Clamp Specifications For Bearing Mounting Material 6000 Series Aluminum Alloy
Surface Treatment Clear Anodize Thickness Standard Type Side Hole Machining Not Provided

Frequently asked question (FAQ)FAQ

Question:Question: What is the purpose of the shaft collar?
Answer:Answer: The shaft collar can be used for common applications such as stopper, positioning, pulley fixing, etc., and can also be used for fixing the inner ring of a bearing; various parts such as fixing plates can also be installed by opening various mounting holes, and the types of the holes include through holes, screw holes and counterbored holes; meanwhile, it can also be used for installing a sensor or serving as a buffer, so that metal sounds caused by contact between metal parts are avoided; and finally, it can also be used for fixing the shaft end of a screw shaft.
Question:Question: Types of shaft collars?
Answer:Answer: According to the connection method, the types can be divided into set screw, slit, split and handle.
Question:Question: Are the set screws of shaft collars supplied or do they need to be purchased separately?
Answer:Answer: At present, the standard products sold by MISUMI are all supplied with set screws and do not need to be purchased separately.
Question:Question: Which type of shaft collars is easy to install and can be removed frequently?
Answer:Answer: Handle type shaft collars.
Question:Question: Which type of shaft collars can be installed later, easy to maintain, easy to remove?
Answer:Answer: Split shaft collars.
Question:Question: In order to avoid shaft damage when fixing the shaft, which types of shaft collars are recommended?
Answer:Answer: Slit, split, handle.
Question:Question: Which parts sold by MISUMI do the shaft collars generally work with?
Answer:Answer: We recommend that you use them with guide shafts, rotating shafts, round type posts, mounting bases, timing pulleys, etc.
Question:Question: What are the outer diameter tolerances of the shaft collar, guide shaft and rotating shaft, respectively, when they are used in combination?
Answer:Answer: Guide shaft: O.D. tolerance g6, h5, f8; rotating shaft: O.D. tolerance g6, h7.
Question:Question: Do you have recommended models of shaft collars that sell well?
Answer:Answer: Split: SCS SSCCN
Set screw: SCCN PSCCN
Question:Question: Advantages of the MISUMI shaft collars?
Answer:Answer: Short delivery time: almost all of them are available in stock, and can be shipped in 1 day
Drawings: both CAD and 3D drawings can be downloaded.
Dimension: I.D. can be selected from 3 to 100mm

Check other FAQ (7 items) HideĐóng.