A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

What are the types of MISUMI couplings?

There are disc type, grooved type, cross type, claw type, bellows type, rigid type and universal joint type.

How to select coupling according to motor?

Disc type is recommended for servo motors, grooved type is recommended for stepping motors, and cross type is recommended for universal motors.

How to select according to the purpose, environment, working conditions?

Please refer to the MISUMI website.

What kind of coupling should be used when the angular misalignment is very large?

Please select the universal joint with allowable angular misalignment of 30 degrees. In addition, when grease cannot be applied regularly, use a rubber sleeve to fill grease and use it.

Which disc type coupling is better, single disc type or double disc type?

Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase. Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use.

How much is appropriate to insert the shaft into the coupling during installation?

Please select the length of the main body (coupling part) described in the product catalog. If the insertion amount is too short, the shaft may slip and the clamping part may be damaged; If the insertion amount is too long, it will be damaged due to shaft interference inside the coupling.

Why is it necessary to install a protection cover around the coupling?

Due to high-speed rotation, accidental contact may result in injury or entanglement of gloves, towels, etc. In addition, for some reasons, parts may be damaged or debris may be scattered. Therefore, be sure to install the safety protection cover.

What should I do if there is no matching shaft bore diameter?

Please select a product with changeable keyway width or available with keyway processing. MISUMI products are divided into MCSLCWK series (disc type), CPOC series (cross type) and MMJN series (claw type), etc.

Is it a defective product that has difference in groove gap width?

Since the difference is within the dimensional tolerance range, there is no problem.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(320 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

GCPS26-5-6

Shaft Bore Dia. 1 d1 (or d) Shaft Bore Dia. 2 d2 (or d) O.D. Overall Length Application Features Allowable Torque Shaft Bore Shape Shaft Tightening Method type Allowable Torque Range CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. 1 d1 (or d)(Ø)
4

5

6

6.35

8

10

11

12

14

15

16

18
ClearTrống
Shaft Bore Dia. 2 d2 (or d)(Ø)
4

5

6

6.35

8

10

11

12

14

15

16

18
ClearTrống
O.D.(Ø)
20

26

29

33

39
ClearTrống
Overall Length(mm)
23.05

25.45

25.7

28.5

35
ClearTrống
Application
- For Servo Motors
- Stepping Motor
ClearTrống
Features
High Torsional Rigidity

High Torque Type

Zero Backlash
ClearTrống
Allowable Torque(N•m)
1

2

3

5

8
ClearTrống
Shaft Bore Shape
Keywayed Bore (d1 Side)

Keywayed Bore (d1/d2 Side)

Keywayed Bore (d2 Side)

Standard Bore
ClearTrống
Shaft Tightening Method
- Fastening Bolt
- Set Screw
ClearTrống
type
- GCPS
- GCPSLK
- GCPSRK
- GCPSS
- GCPSSLK
- GCPSSRK
- GCPSSWK
- GCPSWK
ClearTrống
Allowable Torque Range(N•m)
0.05~1.00

1.01~3.00

3.01~5.00

5.01~10.00
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less

10 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Disc Couplings High Flexible, Single Disc

Until 31/12/2024
Volume Discount

Check FAQ of this product (10 items)

Brand :

MiSUMi Economy

Part Number :

GCPS26-5-6 SALE

GCPS26-5-6.35 SALE

GCPS26-5-8 SALE

GCPS26-5-10 SALE

GCPS26-5-11 SALE

GCPS26-6-6.35 SALE

GCPS26-6-8 SALE

GCPS26-6-10 SALE

GCPS26-6-11 SALE

GCPS26-6.35-6.35 SALE

GCPS26-6.35-8 SALE

GCPS26-6.35-10 SALE

GCPS26-6.35-11 SALE

GCPS26-8-8 SALE

GCPS26-8-10 SALE

GCPS26-8-11 SALE

GCPS26-10-10 SALE

GCPS26-10-11 SALE

GCPS29-5-5 SALE

GCPS29-5-6 SALE

GCPS26-5-6

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product
Universal type with excellent flexibility. The price is cheaper than MISUMI diaphragm couplings suitable for servo motors.

Economy High Flexible Single Disc Coupling

Single disc High strength Precision machinery

- Compact structure with no backlash

- Excellent shock absorption, ensuring no noise and no wear

- High transmission efficiency up to specified percentage

- Suitable for harsh environments and high temperatures

- Simple and lightweight design allows for easy installation and disassembly

Economy High Flexible Single Disc Coupling

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Coupling Product Overview

The disc Coupling is composed of several groups of discs (stainless steel thin plates) that are interlaced with two halves of the Coupling with bolts, and each group of discs is formed by stacking several pieces.
The disc Coupling relies on the elastic deformation of the disc to compensate for the relative displacement of the connected two shafts, which is a high-performance flexible Coupling with strong metal components.
It is characterized by compact structure, no backlash, high strength, long service life, no rotation clearance, no influence of temperature and oil pollution, acid resistance, alkali resistance and corrosion resistance.
Applicable motor types: recommended for servo motors, stepping motors and general motors.

Coupling Product Feature

■ Main characteristics of disc Coupling
1. Strong ability to compensate for misalignment between two axes. Compared with tooth Coupling, angular displacement can be doubled. In case of radial displacement, reaction force is small, flexibility is large, and certain axial, radial and angular displacements are allowed.
2. It has obvious shock absorption, no noise and no wear.
3. Suitable for working in high temperature (-80+300) and harsh environment, and operate safely under shock and vibration conditions.
4. High transmission efficiency, up to 99.86%. Especially suitable for medium, high speed and high power transmission.
5. Simple structure, light weight, small in size and convenient assembly and disassembly. It can be assembled and disassembled without moving the machine (models with intermediate shaft), and requiring no lubrication.
6. It can accurately transmit the rotational speed without slip, and can be used for transmission of precision machinery.

Dimensional Coupling Drawing

Universal type with excellent flexibility. The price is the lowest among MISUMI disc Couplings suitable for servo motors.

Dimensional Coupling Drawing

The bolt direction of single disc Coupling is staggered on opposite sides (to improve product balance). The drawings are for reference only. The actual products may differ.

【Economic type】Disc type Coupling High flexibility type (Single disc type) Servo motor applicable type: Related image

Type	Material			Surface Treatment		Accessories
	Body	Disc	Set Screw, Fastening Bolt	Body	Set Screw, Fastening Bolt
①	Aluminum	Stainless Steel	SCM435	Alumite Treatment	Ferroferric Oxide Protective Film	Fastening Bolt
②						Set Screw

Coupling Specification Table

D	d₁, d₂ selection (But d₁≤d₂)												L	ℓ	F₁	F₂	A	Fastening Bolt		Set Screw
																		M	Tightening Torque	M	Tightening Torque
																		M	(N·m)	M	(N·m)
20	＊4	＊5	6	6.35	8								23.05	11	3.5	5.5	6.4	M2.5	1.0	M3	0.7
26		＊5	6	6.35	8	10	11						25.45	11.9	3.5	5.5	9	M2.5	1.0	M3	0.7
29		＊5	6	6.35	8	10	11	12	14				25.7	11.9	3.5	5.5	10.5	M2.5	1.0	M4	1.7
33			6		8	10	11	12	14	15	16		28.5	13	4	6.5	12	M3	1.5	M4	1.7
39					8	10	11	12	14	15	16	18	35	16	4.75	8	14	M4	3.5	M5	4.0

d1 d2 ＊marked products without keyway hole.

d₁, d₂＊marked products without keyway hole.

■Characteristic Value

D	Allowable torque (N·m)	Allowable angle (°)	Static torsional rigidity (N·m/rad)	Maximum speed (r/min)	Moment of inertia (kg·m²)	Allowable axial amplitude (mm)	ompensation coefficient	Weight (g)
D	Allowable torque (N·m)	Allowable angle (°)	Static torsional rigidity (N·m/rad)	Maximum speed (r/min)	Moment of inertia (kg·m²)	Allowable axial amplitude (mm)	ompensation coefficient	GCPS	GCPSS
20	1	2	700	10000	8.8×10^－⁷	±0.10	2	16	17
26	2		1000		2.5×10^－⁶	±0.10		24	26
29	3		1350		4.1×10^－⁶	±0.15		31	35
33	5		2000		7.7×10^－⁶	±0.20		44	49
39	8		4250		1.9×10^－⁵	±0.25		82	88

Lateral misalignment is not allowed for single disc type.

Static torsional stiffness, moment of inertia and weight are the values at the maximum shaft dia..

■Shaft slip torque (N·m)

When the shaft slip torque is less than the allowable torque, please use it below the shaft slip torque.

D	d_1,d₂
D	4	5	6	6.35	8	10	11	12	14	15	16	18
20	1.0	1.0	1.0	1.0	1.0	－	－	－	－	－	－	－
26	－	1.0	1.5	2.0	2.0	2.0	2.0	－	－	－	－	－
29	－	1.0	1.5	2.0	2.5	2.5	3.0	3.0	3.0	－	－	－
33	－	－	2.5	－	2.5	3.5	3.5	4.0	5.0	5.0	5.0	－
39	－	－	－	－	5.5	8.0	8.0	8.0	8.0	8.0	8.0	8.0

Coupling Precautions

■ Calibration and adjustment
1. The Coupling allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
Be sure to make calibration and adjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviations occur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.

Example of Use Coupling


Use example of Coupling 1: motor×gear box	Use example of Coupling 2: motor×ball screw


Use example of Coupling 3: motor×encoder	Use example of Coupling 4: motor×measuring tester

Coupling Usage Method

■Mounting method
STEP1 Insert the Coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and Coupling bore.
Then, when inserting the Coupling into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the Coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the Coupling slide axially and confirm its smooth movement.
Then, rotate the Coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type Coupling, so carry out positioning securely.
Simple lateral misalignment confirmation

Simple lateral misalignment confirmation

Simple angular misalignment confirmation

STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
＊ If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
GCPS26-5-6SALE
GCPS26-5-6.35SALE
GCPS26-5-8SALE
GCPS26-5-10SALE
GCPS26-5-11SALE
GCPS26-6-6.35SALE
GCPS26-6-8SALE
GCPS26-6-10SALE
GCPS26-6-11SALE
GCPS26-6.35-6.35SALE
GCPS26-6.35-8SALE
GCPS26-6.35-10SALE
GCPS26-6.35-11SALE
GCPS26-8-8SALE
GCPS26-8-10SALE
GCPS26-8-11SALE
GCPS26-10-10SALE
GCPS26-10-11SALE
GCPS29-5-5SALE
GCPS29-5-6SALE
GCPS29-5-6.35SALE
GCPS29-5-8SALE
GCPS29-5-10SALE
GCPS29-5-11SALE
GCPS29-5-12SALE
GCPS29-5-14SALE
GCPS29-6-6SALE
GCPS29-6-6.35SALE
GCPS29-6-8SALE
GCPS29-6-10SALE
GCPS29-6-11SALE
GCPS29-6-12SALE
GCPS29-6-14SALE
GCPS29-6.35-6.35SALE
GCPS29-6.35-8SALE
GCPS29-6.35-10SALE
GCPS29-6.35-11SALE
GCPS29-6.35-12SALE
GCPS29-6.35-14SALE
GCPS29-8-8SALE
GCPS29-8-10SALE
GCPS29-8-11SALE
GCPS29-8-12SALE
GCPS29-8-14SALE
GCPS29-10-10SALE
GCPS29-10-11SALE
GCPS29-10-12SALE
GCPS29-10-14SALE
GCPS29-11-11SALE
GCPS29-11-12SALE
GCPS29-11-14SALE
GCPS29-12-12SALE
GCPS29-12-14SALE
GCPS29-14-14SALE
GCPSLK26-6-6SALE
GCPSLK26-6-6.35SALE
GCPSLK26-6-8SALE
GCPSLK26-6-10SALE
GCPSLK26-6-11SALE
GCPSLK26-8-8SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Shaft Bore Dia. 1 d1 (or d) (Ø)	Shaft Bore Dia. 2 d2 (or d) (Ø)	O.D. (Ø)	Overall Length (mm)	Application	Allowable Torque Range (N•m)	Features	Allowable Torque (N•m)	Allowable Axial Misalignment (mm)	Moment of Inertia (kg･m²)	Shaft Bore Shape	Shaft Tightening Method
272,234 VND 231,399 VND	1 Piece(s)	Available	Same day	5	6	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	5	6.35	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	5	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	5	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,236 VND 245,012 VND	1 Piece(s)	Available	8 Day(s)	5	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	6	6.35	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	6	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 231,399 VND	1 Piece(s)	Available	Same day	6	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,236 VND 245,012 VND	1 Piece(s)	Available	8 Day(s)	6	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	6.35	6.35	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	6.35	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 231,399 VND	1 Piece(s)	Available	Same day	6.35	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,236 VND 245,012 VND	1 Piece(s)	Available	8 Day(s)	6.35	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	8	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	8	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	8	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	10	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
272,234 VND 245,011 VND	1 Piece(s)	Available	8 Day(s)	10	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	5	5	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	5	6	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	5	6.35	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	5	8	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	5	10	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	5	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	5	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	5	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6	6	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6	6.35	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	6	8	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	6	10	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6.35	6.35	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6.35	8	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	6.35	10	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	6.35	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	6.35	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	6.35	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	8	8	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	8	10	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	8	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	8	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	8	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	10	10	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	10	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	10	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	10	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,361 VND 279,325 VND	1 Piece(s)	Available	8 Day(s)	11	11	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	11	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	11	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 263,806 VND	1 Piece(s)	Available	Same day	12	12	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	12	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
310,360 VND 279,324 VND	1 Piece(s)	Available	8 Day(s)	14	14	29	25.7	For Servo Motors / Stepping Motor	1.01~3.00	High Torsional Rigidity / High Torque Type / Zero Backlash	3	0.15	4.1×10^-6	Standard Bore	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	10 Day(s)	6	6	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	10 Day(s)	6	6.35	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	10 Day(s)	6	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	10 Day(s)	6	10	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	10 Day(s)	6	11	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt
269,431 VND 242,488 VND	1 Piece(s)	Available	8 Day(s)	8	8	26	25.45	For Servo Motors	1.01~3.00	High Torque Type / Zero Backlash	2	0.1	2.5×10^-6	Keywayed Bore (d1 Side)	Fastening Bolt

Loading...Tải…

Basic InformationThông tin cơ bản

Series Name	Disc	Allowable Misalignment	Angular Misalignment / Axial Misalignment	Max. Rotational Speed Range(r/min)	4001~10000
Body Material	Aluminum Alloy	Allowable Angular Misalignment(deg)	2	Product Category	Coupling Main Body
Max. Rotational Speed(r/min)	10000	Disc Material	Stainless Steel	Single/Double	Single

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is a coupling?: Answer:Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
Question:Question: What are the types of MISUMI couplings?: Answer:Answer: There are disc type, grooved type, cross type, claw type, bellows type, rigid type and universal joint type.
Question:Question: How to select coupling according to motor?: Answer:Answer: Disc type is recommended for servo motors, grooved type is recommended for stepping motors, and cross type is recommended for universal motors.
Question:Question: How to select according to the purpose, environment, working conditions?: Answer:Answer: Please refer to the MISUMI website.
Question:Question: What kind of coupling should be used when the angular misalignment is very large?: Answer:Answer: Please select the universal joint with allowable angular misalignment of 30 degrees. In addition, when grease cannot be applied regularly, use a rubber sleeve to fill grease and use it.
Question:Question: Which disc type coupling is better, single disc type or double disc type?: Answer:Answer: Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use.
Question:Question: How much is appropriate to insert the shaft into the coupling during installation?: Answer:Answer: Please select the length of the main body (coupling part) described in the product catalog. If the insertion amount is too short, the shaft may slip and the clamping part may be damaged; If the insertion amount is too long, it will be damaged due to shaft interference inside the coupling.
Question:Question: Why is it necessary to install a protection cover around the coupling?: Answer:Answer: Due to high-speed rotation, accidental contact may result in injury or entanglement of gloves, towels, etc. In addition, for some reasons, parts may be damaged or debris may be scattered. Therefore, be sure to install the safety protection cover.
Question:Question: What should I do if there is no matching shaft bore diameter?: Answer:Answer: Please select a product with changeable keyway width or available with keyway processing. MISUMI products are divided into MCSLCWK series (disc type), CPOC series (cross type) and MMJN series (claw type), etc.
Question:Question: Is it a defective product that has difference in groove gap width?: Answer:Answer: Since the difference is within the dimensional tolerance range, there is no problem.

Check other FAQ (7 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. 1 d1 (or d)(Ø)

Shaft Bore Dia. 2 d2 (or d)(Ø)

O.D.(Ø)

Overall Length(mm)

Application

Features

Allowable Torque(N•m)

Shaft Bore Shape

Shaft Tightening Method

type

Allowable Torque Range(N•m)

CADCAD