Which disc type coupling is better, single disc type or double disc type?

Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase. Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use.

Abnormal sound or vibration occurs during use of disc type coupling.

When a servo motor is used, the frequency of the mechanical resonance suppression filter is set as its inherent vibration frequency in the control system to suppress sound and vibration. When using a stepping motor, the rotational speed can be finely adjusted, or the vibration can be absorbed and suppressed by the high damping rubber type coupling with obvious attenuation effect.

How to select according to the purpose, environment, working conditions?

Please refer to the MISUMI website.

A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

The coupling is damaged in use.

Whether it is within the allowable axis deviation during use Please note that when multiple axis deviations occur at the same time, their allowable values are reduced to 1/2 of that described in the product catalog.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(887 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

GCPW26-8-11

Shaft Bore Dia. 1 d1 (or d) Shaft Bore Dia. 2 d2 (or d) O.D. Overall Length Allowable Torque Range Features Allowable Torque Allowable Lateral Misalignment Allowable Lateral Misalignment Range Shaft Bore Shape Shaft Tightening Method type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. 1 d1 (or d)(Ø)
4

5

6

6.35

8

10

11

12

14

15

16

18
ClearTrống
Shaft Bore Dia. 2 d2 (or d)(Ø)
4

5

6

6.35

8

10

11

12

14

15

16

18
ClearTrống
O.D.(Ø)
20

26

29

33

39
ClearTrống
Overall Length(mm)
28.8

34.1

34.3

40

49.4
ClearTrống
Allowable Torque Range(N•m)
0.05~1.00

1.01~3.00

3.01~5.00

5.01~10.00
ClearTrống
Features
High Torsional Rigidity

High Torque Type

Zero Backlash
ClearTrống
Allowable Torque(N•m)
1

2

3

5

8
ClearTrống
Allowable Lateral Misalignment(mm)
0.1

0.15

0.2

0.25
ClearTrống
Allowable Lateral Misalignment Range(mm)
0.02~0.2

0.21~0.40
ClearTrống
Shaft Bore Shape
Keywayed Bore (d1 Side)

Keywayed Bore (d1/d2 Side)

Keywayed Bore (d2 Side)

Standard Bore
ClearTrống
Shaft Tightening Method
- Fastening Bolt
- Set Screw
ClearTrống
type
- GCPSW
- GCPSWLK
- GCPSWRK
- GCPSWWK
- GCPW
- GCPWLK
- GCPWRK
- GCPWWK
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less

10 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Disc Couplings High Flexible, Double Disc (Part Number)

Until 31/12/2024
Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Part Number :

GCPW26-8-11 SALE

GCPW26-10-10 SALE

GCPW26-10-11 SALE

GCPW29-5-5 SALE

GCPW29-5-6 SALE

GCPW29-5-6.35 SALE

GCPW29-5-8 SALE

GCPW29-5-10 SALE

GCPW29-5-11 SALE

GCPW29-5-12 SALE

GCPW29-5-14 SALE

GCPW29-6-6 SALE

GCPW29-6-6.35 SALE

GCPW29-6-8 SALE

GCPW29-6-10 SALE

GCPW29-6-11 SALE

GCPW29-6-12 SALE

GCPW29-6-14 SALE

GCPW29-6.35-6.35 SALE

GCPW29-6.35-8 SALE

GCPW26-8-11

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

· GCPSW Model Disc Couplings High Flexible, Double Disc.
· Body material: Aluminum alloy with Alumite Treatment surface.
· Spacer disc material is Stainless steel with
· Fastening Bolt, Set Screw: Steel SCM435.
· Fastening surface treatment with Ferro ferric Oxide Protective Film.
· Shaft Fastening Method: Lock bolt clamp and screw type.
· GCPSW Model Body size: 20 to 39.
· Allowable Angular misalignment 2 degree.
· Maximum Rotational Speed: 10,000 (r/min).
· Maximum Rotational Speed Range: 4001 ~ 10000 (r/min).
· Application : For Servo Motors / Stepping Motor.

Economy High Flexible Double Disc Coupling

High flexibilityZero backlashDouble disc

- Exceptional flexibility for compensating axial, radial, and angular misalignments

- High transmission efficiency up to specified percentage.

- Suitable for high-speed applications with a maximum rotational speed up to specified RPM

- Lightweight and compact design allows for easy installation

- Ideal for medium to high power transmission

Economy High Flexible Double Disc Coupling

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Coupling Product Overview

The disc Coupling is composed of several groups of discs (stainless steel thin plates) that are interlaced with two halves of the Coupling with bolts, and each group of discs is formed by stacking several pieces.
The disc Coupling relies on the elastic deformation of the disc to compensate for the relative displacement of the connected two shafts, which is a high-performance flexible Coupling with strong metal components.
It is characterized by compact structure, no backlash, high strength, long service life, no rotation clearance, no influence of temperature and oil pollution, acid resistance, alkali resistance and corrosion resistance.
Applicable motor types: recommended for servo motors, stepping motors and general motors.

Coupling Product Feature

■ Main characteristics of disc Coupling
1. Strong ability to compensate for misalignment between two axes. Compared with tooth Coupling, angular displacement can be doubled. In case of radial displacement, reaction force is small, flexibility is large, and certain axial, radial and angular displacements are allowed.
2. It has obvious shock absorption, no noise and no wear.
3. Suitable for working in high temperature (-80+300) and harsh environment, and operate safely under shock and vibration conditions.
4. High transmission efficiency, up to 99.86%. Especially suitable for medium, high speed and high power transmission.
5. Simple structure, light weight, small in size and convenient assembly and disassembly. It can be assembled and disassembled without moving the machine (models with intermediate shaft), and requiring no lubrication.
6. It can accurately transmit the rotational speed without slip, and can be used for transmission of precision machinery

Dimensional Coupling Drawing

Universal type with excellent flexibility. The price is the lowest among MISUMI diaphragm Couplings suitable for servo motors.
Dimensional drawing of disc Coupling

TYPE				Material			Surface Treatment		Accessories
Standard Hole	d1 (One side)	d2 (One side)	d1, d2 (Both sides)	Body	Disc	Fastening Bolt, Set Screw	Body	Fastening Bolt, Set Screw
GCPW	GCPWLK	GCPWRK	GCPWWK	Aluminum	Stainless Steel	SCM435	Alumite Treatment	Ferroferric Oxide Protective Film	Fastening Bolt
GCPSW	GCPSWLK	GCPSWRK	GCPSWWK						Set Screw

Coupling Specifications Overview

Specification Table
Please order after selecting part number and parameters according to the selection steps

. Please specify the shaft bore dia. within the range of d_1≤d₂.

Part Number (Type·D)	－	d₁	－	d₂
GCPW29	－	10	－	14

Part Number			d₁, d₂ selection (But d₁≤d₂)												d₃	L	R	F₁	F₂	A	Fastening Bolt		Set Screw
Type		D																			M	Tightening Torque	M	Tightening Torque
Type		D																			M	(N·m)	M	(N·m)
Clamping type GCPW GCPWLK GCPWRK GCPWWK	Set Screw type GCPSW GCPSWLK GCPSWRK GCPSWWK	20	＊4	＊5	6	6.35	8								8.5	28.8	11	3.5	5.5	6.4	M2.5	1.0	M3	0.7
		26		＊5	6	6.35	8	10	11						11.5	34.1	11.9	3.5	5.5	9			M3	0.7
		29		＊5	6	6.35	8	10	11	12	14				14.5	34.3	11.9	3.5	5.5	10.5			M4	1.7
		33			6		8	10	11	12	14	15	16		16.5	40	13	4	6.5	12	M3	1.5	M4	1.7
		39					8	10	11	12	14	15	16	18	19	49.4	16	4.75	8	14	M4	3.5	M5	4.0

d₁ and d₂＊marked products without keyway hole.

■Characteristic Value

Part Number			Allowable torque (N·m)	Allowable angle (°)	Allowable lateral misalignment (mm)	Static torsional rigidity (N·m/rad)	Maximum speed (r/min)	Moment of inertia (kg·m²)	Allowable axial amplitude (mm)	Compensation coefficient	Weight (g)
Type		D	Allowable torque (N·m)	Allowable angle (°)	Allowable lateral misalignment (mm)	Static torsional rigidity (N·m/rad)	Maximum speed (r/min)	Moment of inertia (kg·m²)	Allowable axial amplitude (mm)	Compensation coefficient	GCPW	GCPSW
GCPW GCPWLK GCPWRK GCPWWK	GCPSW GCPSWLK GCPSWRK GCPSWWK	20	1	2	0.1	550	10000	1.1×10^－6	±0.20	2	19	19
		26	2		0.15	700		3.3×10^－6	±0.20		31	33
		29	3		0.15	1200		5.5×10^－6	±0.30		43	44
		33	5		0.2	1500		1.1×10^－5	±0.40		60	65
		39	8		0.25	3350		2.7×10^－5	±0.50		113	118

Static torsional stiffness, moment of inertia and weight are the values at the maximum shaft dia..

■Shaft slip torque (N·m)

When the shaft slip torque is less than the allowable torque, please use it below the shaft slip torque.

Part Number			d₁, d₂
Type		D	4	5	6	6.35	8	10	11	12	14	15	16	18
GCPW GCPWLK GCPWRK GCPWWK	GCPSW GCPSWLK GCPSWRK GCPSWWK	20	1.0	1.0	1.0	1.0	1.0	－	－	－	－	－	－	－
		26	－	1.0	1.5	2.0	2.0	2.0	2.0	－	－	－	－	－
		29	－	1.0	1.5	2.0	2.5	2.5	3.0	3.0	3.0	－	－	－
		33	－	－	2.5	－	2.5	3.5	3.5	4.0	5.0	5.0	5.0	－
		39	－	－	－	－	5.5	8.0	8.0	8.0	8.0	8.0	8.0	8.0

Coupling Precautions

■ Calibration and adjustment
1. The Coupling allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
Be sure to make calibration and adjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviations occur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.

Example of Use Coupling


Use example of Coupling 1: motor × gear box	Use example of Coupling 2: motor × ball screw


Use example of Coupling 3: motor × encoder	Use example of Coupling 4: motor × measuring tester

Coupling Usage Method

■Mounting method
STEP1 Insert the Coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and Coupling bore.
Then, when inserting the Coupling into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the Coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the Coupling slide axially and confirm its smooth movement.
Then, rotate the Coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type Coupling, so carry out positioning securely.
Simple lateral misalignment confirmation

Simple lateral misalignment confirmation

Simple angular misalignment confirmation

STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
＊ If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
GCPW26-8-11SALE
GCPW26-10-10SALE
GCPW26-10-11SALE
GCPW29-5-5SALE
GCPW29-5-6SALE
GCPW29-5-6.35SALE
GCPW29-5-8SALE
GCPW29-5-10SALE
GCPW29-5-11SALE
GCPW29-5-12SALE
GCPW29-5-14SALE
GCPW29-6-6SALE
GCPW29-6-6.35SALE
GCPW29-6-8SALE
GCPW29-6-10SALE
GCPW29-6-11SALE
GCPW29-6-12SALE
GCPW29-6-14SALE
GCPW29-6.35-6.35SALE
GCPW29-6.35-8SALE
GCPW29-6.35-10SALE
GCPW29-6.35-11SALE
GCPW29-6.35-12SALE
GCPW29-6.35-14SALE
GCPW29-8-8SALE
GCPW29-8-10SALE
GCPW29-8-11SALE
GCPW29-8-12SALE
GCPW29-8-14SALE
GCPW29-10-10SALE
GCPW29-10-11SALE
GCPW29-10-12SALE
GCPW29-10-14SALE
GCPW29-11-12SALE
GCPW29-11-14SALE
GCPW29-12-12SALE
GCPW29-12-14SALE
GCPW29-14-14SALE
GCPW33-6-6SALE
GCPW33-6-8SALE
GCPW33-6-10SALE
GCPW33-6-11SALE
GCPW33-6-12SALE
GCPW33-6-14SALE
GCPW33-6-15SALE
GCPW33-6-16SALE
GCPW33-8-8SALE
GCPW33-8-10SALE
GCPW33-8-11SALE
GCPW33-8-12SALE
GCPW33-8-14SALE
GCPW33-8-15SALE
GCPW33-8-16SALE
GCPW33-10-10SALE
GCPW33-10-11SALE
GCPW33-10-12SALE
GCPW33-10-14SALE
GCPW33-10-15SALE
GCPW33-10-16SALE
GCPW33-11-11SALE
GCPW33-11-12SALE
GCPW33-11-14SALE
GCPW33-11-15SALE
GCPW33-11-16SALE
GCPW33-12-12SALE
GCPW33-12-14SALE
GCPW33-12-15SALE
GCPW33-12-16SALE
GCPW33-14-14SALE
GCPW33-14-15SALE
GCPW33-14-16SALE
GCPW33-15-15SALE
GCPW33-15-16SALE
GCPW33-16-16SALE
GCPW39-8-8SALE
GCPW39-8-10SALE
GCPW39-8-11SALE
GCPW39-8-12SALE
GCPW39-8-14SALE
GCPW39-8-15SALE
GCPW39-8-16SALE
GCPW39-8-18SALE
GCPW39-10-10SALE
GCPW39-10-11SALE
GCPW39-10-12SALE
GCPW39-10-14SALE
GCPW39-10-15SALE
GCPW39-10-16SALE
GCPW39-10-18SALE
GCPW39-11-11SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Shaft Bore Dia. 1 d1 (or d) (Ø)	Shaft Bore Dia. 2 d2 (or d) (Ø)	O.D. (Ø)	Overall Length (mm)	Allowable Torque Range (N•m)	Features	Allowable Torque (N•m)	Allowable Lateral Misalignment (mm)	Allowable Lateral Misalignment Range (mm)	Allowable Axial Misalignment (mm)	Moment of Inertia (kg･m²)	Shaft Bore Shape	Shaft Tightening Method
338,775 VND 304,898 VND	1 Piece(s)	Available	8 Day(s)	8	11	26	34.1	1.01~3.00	High Torque Type / Zero Backlash	2	0.15	0.02~0.2	0.2	3.3×10^-6	Standard Bore	Fastening Bolt
338,775 VND 304,898 VND	1 Piece(s)	Available	8 Day(s)	10	10	26	34.1	1.01~3.00	High Torque Type / Zero Backlash	2	0.15	0.02~0.2	0.2	3.3×10^-6	Standard Bore	Fastening Bolt
338,775 VND 304,898 VND	1 Piece(s)	Available	8 Day(s)	10	11	26	34.1	1.01~3.00	High Torque Type / Zero Backlash	2	0.15	0.02~0.2	0.2	3.3×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	5	5	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	5	6	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	5	6.35	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	5	8	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	5	10	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	5	11	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 330,369 VND	1 Piece(s)	Available	Same day	5	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	5	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6	6	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6	6.35	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	6	8	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6	10	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	6	11	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6.35	6.35	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	6.35	8	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	6.35	10	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	6.35	11	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	6.35	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,669 VND 349,802 VND	1 Piece(s)	Available	8 Day(s)	6.35	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	8	8	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	Same day	8	10	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	8	11	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	8	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	8	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	10	10	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	10	11	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	10	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
408,078 VND 367,270 VND	1 Piece(s)	Available	Same day	10	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 330,375 VND	1 Piece(s)	Available	Same day	11	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	11	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	12	12	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
408,078 VND 346,866 VND	1 Piece(s)	Available	Same day	12	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
388,676 VND 349,808 VND	1 Piece(s)	Available	8 Day(s)	14	14	29	34.3	1.01~3.00	High Torsional Rigidity / Zero Backlash	3	0.15	0.02~0.2	0.3	5.5×10^-6	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	6	6	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	6	8	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	6	10	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	6	11	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	6	12	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	6	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,020 VND 351,067 VND	1 Piece(s)	Available	Same day	6	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,020 VND 351,067 VND	1 Piece(s)	Available	Same day	6	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	8	8	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	8	10	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	8	11	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	8	12	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	8	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	8	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	8	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	10	10	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	10	11	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	10	12	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	Same day	10	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	10	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	Same day	10	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,020 VND 371,718 VND	1 Piece(s)	Available	8 Day(s)	11	11	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	11	12	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	11	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,020 VND 371,718 VND	1 Piece(s)	Available	8 Day(s)	11	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,020 VND 371,718 VND	1 Piece(s)	Available	8 Day(s)	11	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	12	12	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	Same day	12	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	12	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	12	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	14	14	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	14	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	14	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 351,097 VND	1 Piece(s)	Available	Same day	15	15	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	15	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
413,055 VND 371,750 VND	1 Piece(s)	Available	8 Day(s)	16	16	33	40	3.01~5.00	High Torsional Rigidity / Zero Backlash	5	0.2	0.02~0.2	0.4	1.1×10^-5	Standard Bore	Fastening Bolt
460,130 VND 391,111 VND	1 Piece(s)	Available	Same day	8	8	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	8	10	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	8	11	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,035 VND 414,032 VND	1 Piece(s)	Available	8 Day(s)	8	12	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	8	14	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	8	15	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	8	16	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 391,111 VND	1 Piece(s)	Available	Same day	8	18	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	10	10	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	10	11	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	10	12	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 391,111 VND	1 Piece(s)	Available	Same day	10	14	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	10	15	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	10	16	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 391,111 VND	1 Piece(s)	Available	Same day	10	18	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt
460,130 VND 414,117 VND	1 Piece(s)	Available	8 Day(s)	11	11	39	49.4	5.01~10.00	High Torsional Rigidity / Zero Backlash	8	0.25	0.21~0.40	0.5	2.7×10^-5	Standard Bore	Fastening Bolt

Loading...Tải…

Basic InformationThông tin cơ bản

Series Name	Disc	Application	For Servo Motors / Stepping Motor	Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment
Max. Rotational Speed Range(r/min)	4001~10000	Body Material	Aluminum Alloy	Allowable Angular Misalignment(deg)	2
Product Category	Coupling Main Body	Max. Rotational Speed(r/min)	10000	Disc Material	Stainless Steel
Single/Double	Double

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Which disc type coupling is better, single disc type or double disc type?: Answer:Answer: Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure.
Special attention should be paid to centering during use.
Question:Question: Abnormal sound or vibration occurs during use of disc type coupling.: Answer:Answer: When a servo motor is used, the frequency of the mechanical resonance suppression filter is set as its inherent vibration frequency in the control system to suppress sound and vibration.
When using a stepping motor, the rotational speed can be finely adjusted, or the vibration can be absorbed and suppressed by the high damping rubber type coupling with obvious attenuation effect.
Question:Question: How to select according to the purpose, environment, working conditions?: Answer:Answer: Please refer to the MISUMI website.
Question:Question: What is a coupling?: Answer:Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
Question:Question: The coupling is damaged in use.: Answer:Answer: Whether it is within the allowable axis deviation during use
Please note that when multiple axis deviations occur at the same time, their allowable values are reduced to 1/2 of that described in the product catalog.

Check other FAQ (2 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. 1 d1 (or d)(Ø)

Shaft Bore Dia. 2 d2 (or d)(Ø)

O.D.(Ø)

Overall Length(mm)

Allowable Torque Range(N•m)

Features

Allowable Torque(N•m)

Allowable Lateral Misalignment(mm)

Allowable Lateral Misalignment Range(mm)

Shaft Bore Shape

Shaft Tightening Method

type

CADCAD