(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.
[Feature]
● Number of Teeth Minimum/Maximum : 9 and 35
● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap
● Shaft Bore Diameter Minimum/Maximum (mm.) : 15 and 25
● Material :
SP50B and BSP50B are S45C Equivalent (Spurs are Induction Hardened)
SSP50B - SUS304 Equivalent
● Surface treatment : Black Oxide only BSP50B
[Application]
Sprockets are commonly used in industrial machinery, such as chain conveyors.
Type | [ M ] Material | [ S ] Surface Treatment |
SP50B | S45C Equivalent (Spurs are Induction Hardened) | - |
BSP50B | S45C Equivalent (Spurs are Induction Hardened) | Black Oxide |
SSP50B | SUS304 Equivalent | - |
Part Number | − | Shaft Bore Specs. | − | Shaft Bore Dia. |
SP50B16 | − | N | − | 10 |
BSP50B16 | − | N | − | 10 |
SSP50B17 | − | S | − | 11 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||||||||||
SP | 50 | B | 9 | S N | 10 | 16 | 17 | 18 | 19 | 46.42 | 53 | 34 | 29 | 25 | 5 | 8.7 | 6.4 | 200 | ||||||||||||||
10 | 10 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 51.37 | 58 | 40 | 34 | 270 | |||||||||||||||||||
11 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 56.35 | 64 | 45.5 | 38 | 330 | |||||||||||||||||
12 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 61.34 | 69 | 50 | 44 | 410 | ||||||||||||||
13 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 66.34 | 74 | 51 | 49 | 460 | ||||||||||||||
14 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 71.34 | 79 | 52 | − | 7 | − | 520 | ||||||||||||
15 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 76.35 | 84 | 57 | 620 | |||||||||||||
16 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 81.37 | 89 | 62 | 720 | ||||||||||||
17 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 86.39 | 94 | 67 | 830 | ||||||||||||
18 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 91.42 | 100 | 72 | 28 | 8 | 1000 | |||||||||
19 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 96.45 | 105 | 73 | 1100 | |||||||||||
20 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 101.48 | 110 | 1200 | ||||||||||||
21 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 106.51 | 115 | ||||||||||||||||||
22 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 111.55 | 120 | 1300 | |||||||||||||||||
23 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 116.58 | 125 | ||||||||||||||||||
24 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 121.62 | 130 | 1400 | |||||||||||||||||
25 | 16 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 126.66 | 135 | 1500 | |||||||||||||||||||
26 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 131.7 | 140 | |||||||||||||||||||||
28 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 141.79 | 150 | 1600 | ||||||||||||||||||||
30 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 151.87 | 161 | 1800 | ||||||||||||||||||||
32 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 161.96 | 171 | 1900 | ||||||||||||||||||||
34 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 172.05 | 181 | 2100 | ||||||||||||||||||||
35 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 177.1 | 186 | 2200 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||||||||||
BSP | 50 | B | 9 | N | 10 | 16 | 17 | 18 | 19 | 46.42 | 53 | 34 | 29 | 25 | 5 | 8.7 | 6.4 | 200 | ||||||||||||||
10 | 10 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 51.37 | 58 | 40 | 34 | 270 | |||||||||||||||||||
11 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 56.35 | 64 | 45.5 | 38 | 330 | |||||||||||||||||
12 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 61.34 | 69 | 50 | 44 | 410 | ||||||||||||||
13 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 66.34 | 74 | 51 | 49 | 460 | ||||||||||||||
14 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 71.34 | 79 | 52 | − | 7 | − | 520 | ||||||||||||
15 | 12 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 76.35 | 84 | 57 | 620 | |||||||||||||
16 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 81.37 | 89 | 62 | 720 | ||||||||||||
17 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 86.39 | 94 | 67 | 830 | ||||||||||||
18 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 91.42 | 100 | 72 | 28 | 8 | 1000 | |||||||||
19 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 96.45 | 105 | 73 | 1100 | |||||||||||
20 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 101.48 | 110 | 1200 | ||||||||||||
21 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 106.51 | 115 | ||||||||||||||||||
22 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 111.55 | 120 | 1300 | |||||||||||||||||
23 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 116.58 | 125 | ||||||||||||||||||
24 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 121.62 | 130 | 1400 | |||||||||||||||||
25 | 16 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 126.66 | 135 | 1500 | |||||||||||||||||||
26 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 131.7 | 140 | |||||||||||||||||||||
28 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 141.79 | 150 | 1600 | ||||||||||||||||||||
30 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 151.87 | 161 | 1800 | ||||||||||||||||||||
32 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 161.96 | 171 | 1900 | ||||||||||||||||||||
34 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 172.05 | 181 | 2100 | ||||||||||||||||||||
35 | 16 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 45 | 177.1 | 186 | 2200 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||
SSP | 50 | B | 10 | S N | 10 | 20 | 22 | 51.37 | 58 | 40 | 34 | 25 | 5 | 8.7 | 6.4 | 270 | ||||||||
11 | 12 | 20 | 22 | 24 | 25 | 56.35 | 64 | 45.5 | 39 | 330 | ||||||||||||||
12 | 12 | 20 | 22 | 24 | 25 | 61.34 | 69 | 50 | 44 | 410 | ||||||||||||||
13 | 12 | 20 | 22 | 24 | 25 | 66.34 | 74 | 51 | 49 | 460 | ||||||||||||||
14 | 12 | 20 | 22 | 24 | 25 | 28 | 30 | 71.34 | 79 | 52 | − | 7 | − | 520 | ||||||||||
15 | 12 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 76.35 | 84 | 57 | 620 | ||||||||||||
16 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 38 | 81.37 | 89 | 62 | 720 | |||||||||||
17 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 86.39 | 94 | 67 | 830 | ||||||||||
18 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 91.42 | 100 | 72 | 28 | 8 | 1000 | |||||||
19 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 96.45 | 105 | 73 | 1100 | |||||||||
20 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 101.48 | 110 | 1200 | ||||||||||
21 | 14 | 20 | 25 | 30 | 35 | 40 | 106.51 | 115 | ||||||||||||||||
22 | 16 | 20 | 25 | 30 | 35 | 40 | 111.55 | 120 | 1300 | |||||||||||||||
23 | 16 | 20 | 25 | 30 | 35 | 116.58 | 125 | |||||||||||||||||
24 | 16 | 20 | 25 | 30 | 35 | 121.62 | 130 | 1400 | ||||||||||||||||
25 | 16 | 20 | 25 | 30 | 35 | 40 | 126.66 | 135 | 1500 | |||||||||||||||
26 | 16 | 20 | 25 | 30 | 35 | 131.7 | 140 | |||||||||||||||||
28 | 16 | 20 | 25 | 30 | 35 | 40 | 141.79 | 150 | 1600 | |||||||||||||||
30 | 16 | 20 | 25 | 30 | 35 | 40 | 151.87 | 161 | 1800 | |||||||||||||||
32 | 16 | 25 | 30 | 35 | 161.96 | 171 | 1900 | |||||||||||||||||
35 | 16 | 25 | 30 | 35 | 177.1 | 186 | 2200 |
Shaft Bore Dia. D | Keyway b2 x t2 | Set Screw M |
10 | 3x1.4 | 4 |
10K, 12 | 4x1.8 | 5 |
14~17 | 5x2.3 | 6 |
18~22 | 6x2.8 | 6 |
24~30 | 8x3.3 | 8 |
32~38 | 10x3.3 | 8 |
40, 42 | 12x3.3 | 8 |
45, 50 | 14x3.8 | 10 |
Combination | Set Screw M |
Nominal35, Number of Teeth17, Shaft Dia.25 | 6 |
Nominal40, Number of Teeth14, Shaft Dia.25 | 6 |
Nominal40, Number of Teeth15, Shaft Dia.30 | 6 |
Nominal50, Number of Teeth11~13, Shaft Dia.24 or more | 6 |
Part Number |
---|
SSP50B30-S-16 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Material | Type | Shaft Type | Surface Treatment | Bore Specification |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1,428,350 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 30 | - | [Stainless Steel] SUS304 Equivalent | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) |
Loading...Tải…
Sprocket Shape | Shape B | Nominal | 50 | Number of Strands | Single Strand |
---|---|---|---|---|---|
Chain Type | RS |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy