(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.
[Feature]
● Number of Teeth Minimum/Maximum : 9 and 40
● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap
● Shaft Bore Diameter Minimum/Maximum (mm.) : 10K and 40
● Material :
SP40B and BSP40B are S45C Equivalent (Spurs are Induction Hardened)
SSP40B - SUS304 Equivalent
● Surface treatment : Black Oxide only BSP40B
[Application]
Sprockets are commonly used in industrial machinery, such as chain conveyors.
Type | [ M ]Material | [ S ] Surface Treatmen |
SP40B | S45C Equivalent (Spurs are Induction Hardened) | - |
BSP40B | S45C Equivalent (Spurs are Induction Hardened) | Black Oxide |
SSP40B | SUS304 Equivalent | - |
Part Number | − | Shaft Bore Specs | − | Shaft Bore Dia. |
SP40B16 | − | N | − | 10 |
BSP40B16 | − | N | − | 10 |
SSP40B17 | − | S | − | 11 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||||||||||
SP | 40 | B | 9 | S N | 9 | 10K | 12 | 14 | 37.13 | 42 | 28 | 23 | 22 | 5 | 7.2 | 5.2 | 110 | |||||||||||||||
10 | 9 | 10K | 12 | 14 | 15 | 16 | 17 | 41.1 | 46 | 32 | 27 | 140 | ||||||||||||||||||||
11 | 10 | 10K | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 45.08 | 51 | 36 | 31 | 190 | |||||||||||||||||
12 | 10 | 10K | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 49.07 | 55 | 40 | 35 | 220 | ||||||||||||||||
13 | 12 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 53.07 | 59 | 37 | − | 6 | − | 230 | |||||||||||||||
14 | 12 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 57.07 | 63 | 42 | 280 | ||||||||||||||||
15 | 12 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 61.08 | 67 | 46 | 340 | ||||||||||||||
16 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 65.1 | 71 | 50 | 400 | ||||||||||||||
17 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 69.12 | 76 | 54 | 460 | |||||||||||||
18 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 73.14 | 80 | 57 | 510 | |||||||||||||
19 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 77.16 | 84 | 62 | 590 | ||||||||||||
20 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 81.18 | 88 | 67 | 25 | 7 | 760 | ||||||||||
21 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 85.21 | 92 | 71 | 850 | ||||||||||||
22 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 89.24 | 96 | 75 | 950 | ||||||||||||
23 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 93.27 | 100 | 77 | 1000 | ||||||||||||
24 | 14 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 97.3 | 104 | 63 | 840 | ||||||||||||
25 | 14 | 14 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 101.33 | 108 | 880 | |||||||||||||||
26 | 14 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 105.36 | 112 | 920 | |||||||||||||||||
28 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 113.43 | 120 | 1000 | |||||||||||||||||||
30 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 121.5 | 128 | 1100 | |||||||||||||||||||
32 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 129.57 | 137 | 68 | 28 | 10 | 1300 | ||||||||||||||||
34 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 137.64 | 145 | ||||||||||||||||||||
35 | 14 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 141.68 | 149 | 1400 | |||||||||||||||||||
36 | 16 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 145.72 | 153 | 1500 | |||||||||||||||||||
38 | 16 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 153.79 | 161 | 1600 | |||||||||||||||||||||
40 | 16 | 25 | 28 | 30 | 32 | 35 | 40 | 161.87 | 169 | 1700 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||||||||||
BSP | 40 | B | 9 | N | − | 10K | 12 | 14 | 37.13 | 42 | 28 | 23 | 22 | 5 | 7.2 | 5.2 | 110 | |||||||||||||||
10 | 10K | 12 | 14 | 15 | 16 | 17 | 41.1 | 46 | 32 | 27 | 140 | |||||||||||||||||||||
11 | 10K | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 45.08 | 51 | 36 | 31 | 190 | ||||||||||||||||||
12 | 10K | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 49.07 | 55 | 40 | 35 | 220 | |||||||||||||||||
13 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 53.07 | 59 | 37 | − | 6 | − | 230 | ||||||||||||||||
14 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 57.07 | 63 | 42 | 280 | |||||||||||||||||
15 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 61.08 | 67 | 46 | 340 | |||||||||||||||
16 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 65.1 | 71 | 50 | 400 | |||||||||||||||
17 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 69.12 | 76 | 54 | 460 | ||||||||||||||
18 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 73.14 | 80 | 57 | 510 | ||||||||||||||
19 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 77.16 | 84 | 62 | 590 | |||||||||||||
20 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 81.18 | 88 | 67 | 25 | 7 | 760 | |||||||||||
21 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 85.21 | 92 | 71 | 850 | |||||||||||||
22 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 89.24 | 96 | 75 | 950 | |||||||||||||
23 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 93.27 | 100 | 77 | 1000 | |||||||||||||
24 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 97.3 | 104 | 63 | 840 | |||||||||||||
25 | 14 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 101.33 | 108 | 880 | ||||||||||||||||
26 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 105.36 | 112 | 920 | ||||||||||||||||||
28 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 113.43 | 120 | 1000 | ||||||||||||||||||||
30 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 121.5 | 128 | 1100 | ||||||||||||||||||||
32 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 129.57 | 137 | 68 | 28 | 10 | 1300 | |||||||||||||||||
34 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 137.64 | 145 | |||||||||||||||||||||
35 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 141.68 | 149 | 1400 | ||||||||||||||||||||
36 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 145.72 | 153 | 1500 | ||||||||||||||||||||
38 | 24 | 25 | 28 | 30 | 32 | 35 | 40 | 153.79 | 161 | 1600 | ||||||||||||||||||||||
40 | 25 | 28 | 30 | 32 | 35 | 40 | 161.87 | 169 | 1700 |
Part Number | Shaft Bore Specs. | Shaft Bore Specs.(D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | |||||||||||||||
Type | Number of Teeth | S Specification | N Specification(H7) | |||||||||||||||||||||||
Nominal | Hub Type | |||||||||||||||||||||||||
SSP | 40 | B | 10 | S N | 9 | 12 | 15 | 16 | 41.1 | 46 | 32 | 27 | 22 | 5 | 7.2 | 5.2 | 140 | |||||||||
11 | 10 | 15 | 16 | 18 | 20 | 45.08 | 51 | 36 | 31 | 190 | ||||||||||||||||
12 | 10 | 15 | 16 | 18 | 20 | 49.07 | 55 | 40 | 35 | 220 | ||||||||||||||||
13 | 12 | 15 | 16 | 18 | 20 | 53.07 | 59 | 37 | − | 6 | − | 230 | ||||||||||||||
14 | 12 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 57.07 | 63 | 42 | 280 | |||||||||||||
15 | 12 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 61.08 | 67 | 46 | 340 | ||||||||||||
16 | 13 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 65.1 | 71 | 50 | 400 | |||||||||||
17 | 13 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 69.12 | 76 | 54 | 460 | |||||||||||
18 | 13 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 73.14 | 80 | 57 | 510 | |||||||||||
19 | 14 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 77.16 | 84 | 62 | 590 | |||||||||||
20 | 14 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 81.18 | 88 | 67 | 25 | 7 | 760 | |||||||||
21 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 85.21 | 92 | 71 | 850 | ||||||||||||||
22 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 89.24 | 96 | 75 | 950 | ||||||||||||||
23 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 93.27 | 100 | 77 | 1000 | ||||||||||||||
24 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 97.3 | 104 | 63 | 840 | ||||||||||||||
25 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 101.33 | 108 | 880 | |||||||||||||||
26 | 14 | 20 | 22 | 25 | 30 | 105.36 | 112 | 920 | ||||||||||||||||||
28 | 14 | 20 | 22 | 25 | 30 | 113.43 | 120 | 1000 | ||||||||||||||||||
30 | 14 | 20 | 22 | 25 | 30 | 121.5 | 128 | 1100 | ||||||||||||||||||
32 | 14 | 20 | 22 | 25 | 30 | 129.57 | 137 | 68 | 28 | 10 | 1300 | |||||||||||||||
35 | 14 | 20 | 22 | 25 | 30 | 141.68 | 149 | 1400 | ||||||||||||||||||
36 | 16 | 20 | 22 | 25 | 30 | 145.72 | 153 | 1500 | ||||||||||||||||||
40 | 16 | 20 | 22 | 25 | 30 | 161.87 | 169 | 1700 |
■SP/SSP Shaft Bore Machining Dimensions Table
| ■BSP Shaft Bore Machining Dimensions Table
|
Combination | Set Screw M |
Nominal35, Number of Teeth17, Shaft Dia.25 | 6 |
Nominal40, Number of Teeth14, Shaft Dia.25 | 6 |
Nominal40, Number of Teeth15, Shaft Dia.30 | 6 |
Nominal50, Number of Teeth11~13, Shaft Dia.24 or more | 6 |
Part Number |
---|
SP40B35-S-14 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Material | Type | Shaft Type | Surface Treatment | Bore Specification | Keyway b2 x t2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
420,343 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 35 | - | [Steel] S45C (Induction Hardened Teeth Tip) | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) | - |
Loading...Tải…
Sprocket Shape | Shape B | Nominal | 40 | Number of Strands | Single Strand |
---|---|---|---|---|---|
Chain Type | RS |
Please check the type/dimensions/specifications of the part SP40B35-S-14 in the Sprockets-40B Series series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần SP40B35-S-14 trong chuỗi Sprockets-40B Series.
Part Number |
---|
BSP40B9-N-10K |
SP40B10-N-10K |
SP40B10-S-9 |
SP40B36-S-16 |
SP40B38-S-16 |
SP40B40-S-16 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Material | Type | Shaft Type | Surface Treatment | Bore Specification | Keyway b2 x t2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
304,443 VND | 1 Piece(s) | Available | 8 Day(s) or more | - | 9 | 10K | [Steel] S45C (Induction Hardened Teeth Tip) | Shaft Bore Machined Type | Shaft Bore Machining Configurable | Black Oxide | N (New JIS Key + Tap) | 4 x 1.8 | |
210,816 VND | 1 Piece(s) | Same day | 10 | 10 | 10K | [Steel] S45C (Induction Hardened Teeth Tip) | Shaft Bore Machined Type | Shaft Bore Machining Configurable | Not Provided | N (New JIS Key + Tap) | 4 x 1.8 | ||
62,590 VND | 1 Piece(s) | Same day | 10 | 10 | - | [Steel] S45C (Induction Hardened Teeth Tip) | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) | - | ||
428,505 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 36 | - | [Steel] S45C (Induction Hardened Teeth Tip) | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) | - | |
465,234 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 38 | - | [Steel] S45C (Induction Hardened Teeth Tip) | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) | - | |
518,287 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 40 | - | [Steel] S45C (Induction Hardened Teeth Tip) | Pilot Bore Type | Standard Pilot Bore | Not Provided | S (Pilot Bore) | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy