Safety Valve, Relief Valve AL-150 Series

YOSHITAKE

[Features]・ It is a versatile type that supports fluids such as steam, air, water, and oil・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts・ The sealed structure prevents fluid from leaking to the outside

Air Vent Valve TA-16CVA, Series

YOSHITAKE

Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Compact design permits installation in small space. Included check valve prevents air being sucked in on inlet side, even at negative pressure.

CAD ：

2D

Safety Relief Valve, AL-150T Series

YOSHITAKE

[Features]· Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.· The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.· The sealed construction prevents liquid from leaking outside.

AF-6N Air Vent Valve

VENN

[Features]· Small air vent valve to be used in a pipe, hot water boiler, fan coil, small or medium pressure tank, solar system, or others.· Operations are stable due to the BBC (bubble dispersion) method, so water discharge does not occur.· The air exhaust is tube-shaped.· Compact and capable of up to 1.0MPa.· Equipped with manual shut-down mechanism.

Safety Relief Valve, AL-150L Series

YOSHITAKE

[Features]· The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.· With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

CAD ：

2D

Safety Relief Valve, AL-150TML Series

YOSHITAKE

Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

Safety Relief Valve, AL-17 Series

YOSHITAKE

[Features]・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability・ The down pressure can be adjusted by seat ring・ It can support set pressures up to 1.6 MPa

Air Vent Valve, TA-16 CVS Series

YOSHITAKE

[Features]・ All materials other than valve discs, gaskets, check valves, check valve fitting are made of stainless steel・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement・ Compact size allows installation in a small space・ Excellent sealing performance because synthetic rubber is used for the valve disc・ TA-16CVS makes it easy to connect any exhaust pipe by installing optional pipe connection parts・ Since it has a check valve, it does not suck air even when the inlet side is under negative pressure[Applications]・ building equipment, factory equipment, housing complex

CAD ：

2D

Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

YOSHITAKE

A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

Pressure Reducing Valve for Water, Liquid, Air, Gas, RD-20, 20N Series, [Heisei]

VENN

[Features]· A stainless steel, small-size pressure reducing valve that can be used for both liquid and gas supply pipes—especially in rust-intolerant places where bronze cannot be used. In addition, it can be used for stainless steel piping in door-to-door water supply systems.· Stainless steel and synthetic rubber are used for the liquid-contacting parts and spring casings for excellent corrosion resistance.· The carefully designed flow channel, utilization of square spring, etc., provide a significant size and weight reduction.· Freely adaptable installation positon.· Easy to maintain.· Can be used for liquid and gas, with a primary side pressure of 2.0 MPa.

Safety Relief Valve, AL-140T Series

YOSHITAKE

[Features]・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat・ It is ideal for applications where valve seat leakage cannot be tolerated・ The sealed structure prevents fluid from leaking to the outside

CAD ：

2D

Safety Valve, Relief Valve AL-140 Series

YOSHITAKE

[Features]・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part・ The sealed structure prevents fluid from leaking to the outside

Air Vent Valve TA-16 Series

YOSHITAKE

Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Its compact size enables mounting in a narrow space.[Features]• All parts are made of stainless steel, except for the valve body disk, gasket, and L-hose fitting (TA-16L), which ensures excellent corrosion resistance and durability.• The valve body disk is made of fluororubber, which ensures excellent sealing performance.• The TA-16 can easily be connected to an exhaust pipe by mounting the optional pipe connectors.

CAD ：

2D

Air Vent for Steam - AW2 Type

MIYAWAKI

[Features]·Rapid air evacuation shortens equipment start-up time.[Applications]·It can be used for steam piping and various devices.

Air Vent, 11-AV Series

YOSHITAKE

Operates at a greater output across a wide range of pressures. The free-floating lever is less prone to wearing. The valve body and valve seat are made of highly durable hardened chrome steel.

CAD ：

2D

Safety Relief Valve, AL-150TR Series

YOSHITAKE

A handle-operated valve for changing the pressure easily. Usable as a relief valve.[Features]· The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.· Soft seats are utilized in the main parts for a superior valve seat airtight performance.· Optimal for applications in which valve seat leaks are unacceptable.· The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.· The sealed construction prevents fluid from leaking outside.

Pressure Reducing Valve (Steam) GD-30 Series

YOSHITAKE

This small, lightweight, direct-acting pressure-reducing valve incorporates a stainless steel valve body and valve seat, uses an external-pressure bellows in its detection component, and has excellent durability.

CAD ：

2D

Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

VENN

[Features]· Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).· Note: These valves differ for use with stream, air, vapor, and liquid.

RD-44N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

VENN

Direct acting type general purpose product (low-noise type and pipe-end core support) suitable for housing complexes, hotels, and offices. RD-44N type valves are equipped with only the pressure reducing function, which is fundamental for the water supply pressure composite valve series, and enables increase in construction and test efficiency.[Features]· Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Installation of valve in each room unit eliminates water supply variation due to level differences. 3) No water splashes due to application of appropriate pressure. Reduces water hammering. 4) During maintenance, impact of water outage does not affect other areas. 5. Stable mixing temperature resulting in improved habitability.· Uses chlorine water-resistant EPDM.· Sanitary design avoids pooling of liquids.· Works reliably from low differential pressures to high differential pressure.· Safe and secure construction is made possible due to intact pressure-reducing valves.· You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.· Easy, simple new test gag method.

SL-35N/35HN Type, Relief Valve for Hot Water Equipment

VENN

Diaphragm type relief valve for small hot water boilers and electric water heaters. Used as a relief valve for pressure caused by thermal expansion and on the secondary side of pressure reducing valve.

AF-17N Air Vent Valve

VENN

Building equipment, housing and hot water boiler products with main bodies made from bronze and are complaint with government specifications[Features]· Small air vent valve to be used in a pipe, hot water boiler, fan coil, small/medium pressure tank, solar system, or others.· Operates stably due to the BBC (bubble dispersion) method, so water entrainment discharge does not occur.· The bronze made main body is compliant with government specifications.· Besides having a female screw shape, the vent is also available with union fitting, and tube fittings.· Compact and capable up to 1.0MPa.▪ Equipped with manual shut-down mechanism.

AF-9 Series Air Vent Valve

VENN

Air vent valve with built-in check valve such as pump suction side or sealed circuit[Features]· Air vent valve made of stainless steel with built-in strainer in the main body that boasts superior corrosion resistance and durability. The AF-10 type series has air intake and exhaust functions.· AF-9 type series is an air vent valve with a built-in check valve and is structured to not intake here even when the inlet side is exposed to negative pressure. Hence, it is used when a function is required for only emitting and not in taking the air, such as in the pump suction inlet side and degassing system of sealed circuits.· Easy design construction possible with the built-in strainer.· Made of stainless steel for superior corrosion resistance and durability.· The exhaust vents can be freely rotated 360° and are easy to work with.· Equipped with manual shut-down control.· Does not absorb air even when the pressure is negative, and therefore can be mounted into the pump suction inlet side.

Relief Valve, AL-250 Series

YOSHITAKE

[Features]・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced・ It has stable operation against back pressure changes during continuous blowing

CAD ：

2D

Relief Valve, AL-260 Series

YOSHITAKE

[Features]・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations・ Chattering and hunting are reduced・ It has stable operation against back pressure changes during continuous blowing

Safety Relief Valve, AL-150T-N Series

YOSHITAKE

With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

Ventilation Valve, TA-2 / TA-5 / TA-5F Series

YOSHITAKE

[Features]· Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.· Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.· In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.· TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.· Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

CAD ：

2D

Air Vent Valve TA-16L Series

YOSHITAKE

[Features]・ All materials other than valve discs, gaskets and L-shaped hose fittings (TA-16L) are made of stainless steel・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement・ Compact size allows installation in a small space・ Excellent sealing performance because synthetic rubber is used for the valve disc[Applications]・ building equipment, factory equipment, housing complex

CAD ：

2D

Pressure Reducing Valves (Steam), GD-30S Series

YOSHITAKE

Optimal for applications such as food processing machinery and medical equipment, due to wetted parts made of stainless steel.

CAD ：

2D

Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

YOSHITAKE

Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

CAD ：

2D

Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

YOSHITAKE

Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

CAD ：

2D

Pressure Reducing Valves (Hot and Cold water), GD-41 Series

YOSHITAKE

Saves space and resources. Stainless steel is used for fluid-contacting parts, fluoropolymer for fluid-contacting surfaces, and special fluorine rubber for rubber parts to provide superior corrosion resistance and durability.

Lift Type Safety Valve AL-24/AL-24F Series

YOSHITAKE

[Features]・ It uses a bronze valve box with a stainless steel valve seat so there is no risk of rust・ Since it is a diaphragm type and has no sliding parts, it operates reliably・ The set pressure range is as wide as 0.1 to 0.7 MPa with 1 spring, the adjusting thread is a handle type, and a butterfly nut is used for the lock nut, so the pressure can be easily changed・ Smooth opening and closing even in continuous operation, it operates accurately with respect to the set pressure and discharges liquid・ Stable operation can be obtained from small flow rate to large flow rate・ According to the specifications, you can choose the material of the diaphragm and valve body from 2 types, NBR and FKM (fluoroelastomer)・ It can be installed vertically, horizontally, top, or bottom

RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

VENN

For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery[Features]- A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.- Compact and lightweight; optimum for integration into devices.- Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).- Stainless steel body suitable for higher-grade vapor lines.- Provides large flow rates (heat) required when starting up equipment.- Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.- Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.- Uses SUS316L bellows and a built-in strainer for high reliability.

FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

VENN

In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.[Features]• By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.• As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.• Mounting position can be changed to any orientation.• Wide working differential pressure range.• The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

LP-8HN Level-Regulating Valve (for Water, for General Use with Adjustment Mechanisms)

VENN

[Features]· Standard constant water level valve with adjusting mechanism.· In order to prevent rust, threading can be bronze and embedded in the pipe end core.· A flow-rate adjustment mechanism and a valve closing time adjustment needle are provided.· Solution for rusty water: Screw-in = Bronze body + Pipe end core assembly is possible.· Because a bypass flow path is used for the passage to the pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.· Antifreeze FV jacket is provided.

TR-4N Type Mixing Valve

VENN

[Features]• The TR-4 N mixing valve is a temperature regulating valve that is able to control the temperature of hot-water supply by simply connecting the hot water and water.• As well as ensuring a temperature-stable supply, it also guarantees safety as both the cold and hot water have built-in check valves.• A lightweight and compact design that improves workability and saves on space.• Complies to the performance standards of the Water Supply Act of Japan, allowing for peace of mind when used with water supply systems.• The thermo-element is able to track pressure fluctuations in the hot and cold water, ensuring temperature-stable hot water supply.• Inspection of internal components, including the thermo-element, is possible, making it easy to maintain.• The inlet end of the union joint (hot-water/water) features both a built-in check valve and net.

AF-4 Series Air Vent Valve

VENN

The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.[Features]▪ Due to the improved airtightness, it has adopted the swing valve body.▪ The amount of air discharged from the equipment is comparatively large.▪ It has a simple structure that allows easy handling.· AF-4CN is a rust-resistant nylon-coated product.

AFV-1 N Air Vent Valve, with Intake Mechanism

VENN

For construction equipment, factory equipment, and hot water boiler, etc.[Features]· Small air vent valve with reinforced intake function used in piping, hot water boiler, fan coil, small/medium pressure tank, solar energy system, or others.· Operations are stable due to the BBC (bubble dispersion) method used on discharge side such that water entrainment does not occur.▪With the included breather fitting, intake and discharge of air is possible through single port, facilitating piping without sewage intake.

FM Valve Type 3

FMVALVE

[Features]·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.·Unique buffer mechanism prevents water hammer·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.·If the pump for the water tank is a pressurized water supply system, use an electric control system.

FM Valve 3FB Integrated

FMVALVE

[Features]·Effective for pressurized water supply systems·This valve uses a fully open and fully closed operation method to prevent vibration.·Since the water level difference from water supply to stop can be secured, malfunction due to waves is also prevented.·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE3 Type

MIYAWAKI

[Features]·It is a plus forged product, and is ultra-compact (approximately 50% lower in overall height) and lighter (approximately 60% lighter in weight) than conventional pressure reducing valves for steam, requiring less installation space.·It can be easily adjusted by simply operating the handle (with lock mechanism).·The unique stainless steel micro bellows and high-precision pilot valve have been developed to ensure reliable control.·Its unique stainless steel micro bellows and overstress prevention mechanism (patent pending) provide outstanding durability.·The amount of heat dissipated is reduced, making it excellent in energy saving and economic efficiency.·A fluororesin (PTFE) gasket is used for the main parts, so it has good sealing performance, and it is easy to disassemble, assemble, and replace parts with commercially available tools.[Applications]·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

Air Vent, 22-AV Series

YOSHITAKE

[Features]・ It has wider operating pressure range and more discharge than conventional products・ Compact and lightweight design for easy installation・ Due to the adoption of the free floating lever system, there is no wear of the lever part, and since hardened chrome steel is used for the valve body and valve seat, it has excellent durability・ The valve body has a ball shape and excellent sealing properties・ It can be used even if the specific gravity of the fluid is light

Nylon Coated Air Release Valve, TA-2C Series

YOSHITAKE

Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

CAD ：

2D

Nylon Coated Air Release Valve, TA-3C Series

YOSHITAKE

Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

CAD ：

2D

Relief Valve AL-52F-95 Series for Hot water Equipment

YOSHITAKE

Attached to the piping system of a hot water heat exchanger, when there is a rise in pressure in the system due to the expansion of the water or pressure rise due to the abnormality, it will be used for the purpose of ensuring the safety of the equipment.[Features]▪ A diaphragm with a large effective pressure area is used in the pressure receiver, so the spouting amount during initial operations is considerable, and spouting at start and end pressure is stable.· The water contact part and mechanical part are separated by a diaphragm and are therefore hygienic.· A manual lever is attached, so actuation, level check and drainage from the whole system are easily performed.· The diaphragm has superior durability as it is made from heat resistant and water resistant synthetic rubber.▪ The AL-72F relief valve uses parallel screws in the exit connection that makes piping easy with the cap nut.▪ The AL-52S relief valve has superior corrosion resistance properties because its valve seat is made from stainless steel. This makes it suitable for use in electric water heaters.