Nylon Coated Air Release Valve, TA-2C Series

YOSHITAKE

Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

CAD ：

2D

Nylon Coated Air Release Valve, TA-3C Series

YOSHITAKE

Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

CAD ：

2D

Safety Relief Valve AL-300/AL-301 Series

YOSHITAKE

[Features]▪Mainly used in safety relief values after pressure reducing valves and in safety valves such as small boilers and various pressure containers and instruments.· The AL-301 has stainless steel main components (valves and valve seats), so it offers superior corrosion resistance and durability.

CAD ：

2D

Safety Relief Valve AL-300T/AL-301 T Series

YOSHITAKE

[Features]・ Fluoropolymer disc is used for the valve, so it has excellent seat airtightness・ The main part (valve body / valve seat) of AL-301T is stainless steel, which has excellent corrosion resistance and durability

CAD ：

2D

Intake Valve - Automatic Intake Valve - VB-10 Series

YOSHITAKE

[Features]• This valve increases atmospheric pressure by applying air to the pipe from which it is difficult to drain the water. Consequently, water is easily drained during water drainage operations.• As a 60-mesh strainer is built into the valve, there are no blockages due to scale.• In addition, even if water leaks due to blockage, water can be stopped by tightening the cap.• As the highest temperature is 95°C, warm water is also supported.• Can be mounted in both vertical and horizontal directions (Downward facing not possible).

Intake and Exhaust Valves, TAV-2 Series

YOSHITAKE

Quickly prevents air from being sucked back when negative pressure occurs. Automatically works in response to air intake and exhaust requirements.

CAD ：

2D

Air Vent Valve, TA-3/TA-6 Series

YOSHITAKE

Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

CAD ：

2D

Pressure Reducing Valves (Steam), GD-6N Series

YOSHITAKE

Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.[Features]Constant secondary pressure accuracy does not change even at small capacities.· Compact and lightweight.· The valve body and valve seat have superior durability thanks to the use of stainless steel.· A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

CAD ：

2D

Pressure Reducing Valves (Steam), GP-1002/GP-1002S Series

YOSHITAKE

[Features]· Conforms to SHASE-S106 pressure reducing valve (The Society of Heating, Air Conditioning and Sanitary Engineers of Japan) standards.· The spherical shape of the main valve provides excellent sealing properties to significantly reduce valve seat leakage (corresponding to the ANSI class IV) .· When compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

CAD ：

2D

Pressure Reducing Valves for Steam, GP-1200/GP-1200S Series

YOSHITAKE

The spherical shape of the main valve has excellent sealing properties. Valve seat leakage is significantly reduced.

CAD ：

2D

Pressure Reducing Valves (Hot and Cold water), GD-27-NE Series

YOSHITAKE

[Features]Corrosion-resistant materials are used for liquid-exposed parts, providing superior chlorine resistance against tap or hot water while minimizing rust.· A pressure-balancing valve structure ensures that pressure on the secondary side is kept constant without being affected by pressure on primary side.· The product includes a sealed structure so there is no external outflow even if the diaphragm is damaged.· Because internal inspection can be performed by disassembling from one direction on the upper side, maintenance and inspection are easy.· Pipe mounting direction is unrestricted: horizontal or vertical (however, 125 A and higher can only be mounted horizontally).

CAD ：

2D

Pressure Reducing Valves (Hot and Cold Water), GD-27S/GD-27S-NE Series

YOSHITAKE

Stainless steel used for wetted parts, preventing rust. Use of pressure-balanced valve structure means that secondary side pressure is maintained at a certain level without affecting primary side pressure.

CAD ：

2D

Door-to-Door Water Supply Pressure Reducing Valve and Directional Control Valve, CV-36UL/CV-36UK Series

YOSHITAKE

Fitting with a built-in check valve for the GD-46 / 38 series of pressure reducing valves with bypass for door-to-door water supply in housing complexes.

Door-to-Door Water Supply Pressure Reducing Valve and Directional Control Valve, CV-36UP/CV-36UV Series

YOSHITAKE

It is a fitting with built-in check that is compatible with the pressure reducing valve GD-46/38 Series for the house-to-house water supply for housing complexes with bypass.

Door-to-Door Water Supply Pressure Reducing Valve and Check Valve, JO-36UL/JO-36UK Series

YOSHITAKE

Standard fitting for the GD-46 / 38 series of pressure reducing valves with bypass for door-to-door water supply in housing complexes.

Door-to-Door Water Supply Pressure Reducing Valve Fitting, JO-36UP/JO-36UV Series

YOSHITAKE

Standard fitting for the GD-46 / 38 series of pressure reducing valves with bypass for door-to-door water supply in housing complexes.

Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-15 / GD-15C Series

YOSHITAKE

This product enables a quiet water supply, so it can be used as a pressure reducing valve for individual water supply in apartment buildings, etc. Can hold a very stable secondary side pressure on the water supply side pressure fluctuation. Small and light with a built in strainer.[Features]• Because the noise of the pressure reduction valve itself has been eliminated, water can be supplied even late at night without issue.• Because the supplied water pressure has already been adjusted to a standard set pressure, there is no need for on-site pressure adjustment.• The pressure-balancing valve structure ensures that the pressure on the secondary side is kept constant without being affected by the pressure on primary side.• Thanks to a built-in strainer, any intermixed trash, sand, etc. is removed, preventing it from getting stuck in the valve area or flowing out to the secondary side.• The strainer cap can be removed without using tools. Also, because the strainer and the strainer cap are combined into a single unit, it is easy to perform maintenance inspections inside the valve box without leaving the strainer in.• Thanks to its tightly closed structure, no fluids will escape to the exterior even if the diaphragm is damaged.• Piping can be mounted in whatever direction you like (horizontally or vertically).

Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-25GJ Series

YOSHITAKE

[Features]・ It is a product that realizes low noise water supply as a pressure reducing valve for house-to-house water supply for housing complexes, etc.・ The secondary pressure can be maintained extremely stable against pressure fluctuations on the water supply side, and a strainer is built in, and it is designed to be compact and lightweight, so piping can be handled easily・ Since the noise of the pressure reducing valve itself has been eliminated, it is relieved to supply water even at midnight・ The water supply pressure has already been adjusted to the standard set pressure, so there is no need for on-site pressure regulation・ Since the valve structure uses a pressure balance structure, the secondary pressure is always kept constant without being affected by the primary pressure・ Since it has a built-in strainer, it collects dust, sand, etc., if they are mixed in, and prevents it from getting caught in the valve or flowing out to the secondary side・ The strainer cap can be removed without the use of tools. In addition, since the strainer and strainer cap are integrated, there is no strainer left in the valve box, making maintenance easy・ The closed structure prevents fluid from flowing out even if the diaphragm is damaged・ Since it has a pressure gauge fitting, the pressure gauge can be installed while water is flowing and the set pressure can be easily confirmed

CAD ：

2D

Air Vent TV-2 Series for Vapor

YOSHITAKE

[Features]▪ It prevents air from entering the Weber system. Under any type of pressure from light vacuum state to maximum operating pressure, the air is evacuated automatically under a slightly lower temperature than saturated vapor temperature.▪ Due to the adoption of a hemispherical stainless steel valve, it is protected by using a seal with high protective properties.▪ Due to its compact shape and light weight, it is easy to install.▪ It has been proven to work reliably under a temperature that is slightly lower than the saturated vapor temperature of the operating pressure range.

Pressure Reducing Valve for Water Supply, GD-56-80 Series

YOSHITAKE

It's used for the purpose of water supply of hot water for the heat exchanger, and then used maintaining a predetermined water supply pressure. In addition to the pressure reducing function, a backflow prevention function, a negative-pressure operation function, a pressure balancing function, and a strainer are built in.

CAD ：

2D

Pressure Reducing Valve for Water Supply, GD-56R-80 Series

YOSHITAKE

Built-in backflow prevention function, negative pressure operation function, pressure balance function, automatic return water drain stopper and strainer; used mainly in hot water heat exchangers.[Features]· The pressure-balancing valve mechanism ensures that the pressure on the secondary side is kept constant without being affected by pressure on primary side.· Maintenance and inspection are easy as the strainer, check valve, and strainer cap can be removed without using tools.· The piping installation direction (vertical horizontal) is unrestricted.· Since the drainage plug is a push operated type, it automatically returns to its original position without having to be returned manually.· The GD-91R type pressure reduction valve uses parallel threads for connection, and thus piping can be performed easily using cap nuts.· Valve body and the diaphragm have excellent resistance to chlorinated water.

CAD ：

2D

Pressure Reducing Valve for Water Supply, GD-91R-80 Series

YOSHITAKE

Equipped with a built backflow prevention function, negative pressure operated function, pressure balance function, automatic return water drain stopper, and strainer, used mainly in hot water heat exchangers.

CAD ：

2D

RP-8 Type Pressure-Reducing Valve (for Steam), Benten

VENN

Pilot-operated general-purpose products (high-capacity) for food processing equipment, factory equipment, and disinfection/sterilization equipment.[Features]- Made of stainless steel, ideal for the steam lines of food, disinfection and sterilization equipment.- Useful for a wide range of purposes thanks to its non-corrosive, durable stainless steel structure.- Piston guide structure and special seal ring for stable control.- Can be used over a wide range of pressures and flow rates.- Manual handle control with auto locking mechanism makes pressure adjustment easy.- Compact design.

RP-6BD Trap, Built-in Pressure Reducing Valve (for Vapor), VENN-TEN

VENN

Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.[Features]· Pilot-operated pressure reducing valve with built-in steam trap on the inside of the pilot-operated pressure reduction valve; a sister model of Benten RP-6 type.· Optimal as a pressure reducing valve positioned in locations where drainage water accumulates easily such as down pipes, and locations at which flow-out of drainage water beyond the pressure reducing valve needs to be prevented.· The position of the drain discharge holes can be changed at 90 degree intervals, enabling piping according to installation location.· Adoption of piston guide structure and special seal ring makes control stable.· Can be used for a wide range of pressures and flow rates.· Manual handle control with auto locking mechanism makes pressure adjustment easy.· Compact design.

RP-6A, Pressure-Reducing Valve (for Air/Gas), Benten

VENN

Pilot style general-purpose products (high-capacity) for factory facilities and by various types of equipment[Features]· A pilot-operated pressure reducing valve for air and gases which serves as a supporting model to the BENTEN RP-6.· The adoption of the piston guide structure makes control stable.· Can be used for a wide range of pressures and flow rates.· Manual handle control with auto locking mechanism (nominal diameter 15 to 80) makes pressure adjustment easy.· Compact design.

RD-41F Pressure-Reducing Valve (for Vapor), Mini Benten

VENN

For food machinery, medical equipment, laundry equipment, and other steam-based machinery/equipment[Features]- A direct-acting pressure reducing valve, ideal for the precise control of steam pressure.- Compact and lightweight; best for integrating into devices.- Good for items that need to be free of rust, such as food/kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).- Stainless steel body for higher-grade vapor lines.- Helps guarantee the large (heat) flow rates necessary to start up equipment.- Main body made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.- Secondary side pressure can be smoothly adjusted with the manual handle for the automatic lock mechanism.- Uses SUS316L bellows, equipped in the strainer and is highly durable.

RD-30 Type Pressure-Reducing Valve (for Vapor)

VENN

Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.[Features]▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.▪ Structure is little affected by dirt particles, and maintenance is easy.▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

RD-31FN, 32FN Type, Pressure-Reducing Valve HEISEI

VENN

Direct acting type general-purpose products (made of bronze, medium capacity) such as construction equipment, factory equipment, etc.[Features]· Calm-flow rusty water countermeasures: Bronze body + Pipe-end core, to prevent rusty water.· Low noise design.· Smaller and more lightweight by 50% than FC made conventional parts.▪ Water does not leak outside when diaphragm is damaged.▪ Built-in strainer (Equivalent to 40 mesh with nominal diameter of 50 or less).· Heisei serves as a bronze water pressure reducing valve meeting the needs of the times [trump card to prevent rusty water].▪Already highly winning high praise, it combines technology of pressure reducing valves for water, with controllability, reliability, and user-friendliness, eliminating rust generation from the flow path including pipe joints in particular.· [Heisei] is receiving increased reputation in active countermeasures for rusty water and is used for building facilities, house facilities, plant facilities, boiler water supply, etc.

RD-31N, 32N Type Pressure Reducing Valve, Heisei

VENN

Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.[Features]- Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.- We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.- Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.- Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.- Low-noise design.- Water does not leak outside if the diaphragm is damaged.- Built-in strainer.- (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

RD-33FN, 34FN Pressure-Reducing Valve HEISEI

VENN

Direct acting type general-purpose products (made of bronze, medium capacity) such as construction equipment, factory equipment, etc.[Features]· Heisei serves as a bronze water pressure reducing valve meeting the needs of the times [trump card to prevent rusty water].▪ Already highly winning high praise, it combines technology of pressure reducing valves for water, with controllability, reliability, and user-friendliness, eliminating rust generation from the flow path including pipe joints in particular.· [Heisei] is receiving increased reputation in active countermeasures for rusty water and is used for building facilities, house facilities, plant facilities, boiler water supply, etc.· Heisei rusty water prevention technique: Bronze body + Pipe-end core, to prevent rusty water.· A low noise design.· Smaller and weight reduction to about 50% of FC-made conventional parts.· Water does not leak outside when diaphragm is damaged.· Built-in strainer (Equivalent to 40 mesh with nominal diameter of 50 or less).

RDB-33FN Type, Pressure Reducing Valve (for Water / Hot Water) with Bypass, Heisei

VENN

Pressure reducing valve that integrates three features: pressure reduction, bypass, and stoppage. It also uses space effectively and reduces the cost of facilities.[Features]- The ball-type switchover valve makes function selection easy.- The bypass function enables water passage for cleaning the tube.- Pressure testing can be done while the pressure reducing valve is mounted.Maintenance can be done while water is passing through.

RD-31FNW, 34FNW Type Pressure-Reducing Valve, Heisei

VENN

Uses direct-acting chlorine water-resistant EPDM for building facilities, air-conditioning equipment, etc.[Features]- Uses chlorine water-resistant EPDM.- Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.- Water does not leak outside if the diaphragm is damaged.- Built-in strainer.(Nominal diameter: 50 or less 40 mesh equivalent)

RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

VENN

A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.· For larger capacity and general complex housing, use types RD-44N, 47N, etc.[Features]· Utilizes chlorine water-resistant EPDM.· Sanitary design that prevents pooling of liquids.· Reliable construction from low-to-high differential pressure.· These are non-disassembly type pressure-reducing valves for safe and secure construction.· Post-construction hydraulic testing can be performed with the reducing valve installed.· Utilizes a new, simple test gag method.

RD-47N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

VENN

Pressure reducing valve for hot and cold water supply used in apartment buildings, high-rise buildings, etc.[Features]· Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Eliminates water supply pressure variation difference with elevation difference. 3) No water splashes due to application of appropriate pressure. 4) During maintenance, impact of water outage does not affect wide area. 5. Stable mixing temperature resulting in improved habitability.· Uses chlorine water-resistant EPDM.· Sanitary design avoids pooling of liquids.· Works reliably from low differential pressures to high differential pressure.· Easy, simple new test gag method.· Safe and secure construction is made possible due to intact pressure-reducing valves.· You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.▪ Cassette type valve enables easy maintenance.· With a structure without caulking or welding, all components are recyclable and can be segregated and disposed.

FD-10N Flow-Regulating Valve (for Excess Flow Control/Water Supply)

VENN

[Features]· Various lineup of flow rate settings.･ Internal constant flow cartridge can be replaced and maintained.· The unique rubber elasticity enables stable and constant flow control.▪ Water can be supplied by various equipment and devices such as water supply pipes or sprinklers, and showers, by limiting the rate of flow to the large-scale water receiving tank so that it is not excessively large.

FD-9N, Flow-Regulating Valve (for Excess Flow Control / Water Supply)

VENN

Capable of providing suitable flow via regulation to prevent excessive flow for various types of equipment and machinery such as water supply pipes for large receiving tanks, water sprayers, and showers.*Consider performing installation in a location as far away as possible from areas that require quiet (hotel rooms, hospital rooms, housing, etc.)[Features]· Rich lineup of flow rate settings.･ An internal constant flow cartridge can be replaced and maintained.· The elasticity of the unique rubber component used enables control of a stable and constant flow.

RD-25RSN, 50RSN Series Pressure-Reducing Valve for Water Supply

VENN

This is a pressure reducing valve used for supplying water to small boilers and electric water heaters. It can be freely mounted horizontally or vertically.

RD-25SN, 50SN Series Pressure-Reducing Valve for Water Service

VENN

A pressure reducing valve for supplying water to small boilers and electric water heaters. Can be freely mounted horizontally or vertically.[Features]- Chlorine water-resistant EPDM for improved durability (RD-50SN series).- Low-noise type (RD-50SN series).- Mounting position can be changed to any orientation (except with strainer cap upwards).

LP-8N Type, Water Level-Regulating Valve (for Water and General Use)

VENN

A water-level regulating valve for general water tanks that, apart from the insertion type structure of the bronze body and tube end core, has been simplified and made more compact by removing all adjusting mechanisms. Helps prevent rusty water.[Features]• Countermeasure for rusty water: Threaded type - The bronze body + pipe end core can be inserted.• A bypass flow path is used for the passage to the pilot piping, facilitating a quiet and stable water supply and ensuring that, even if the water supply from the ball tap is temporarily cut due to surges, water will still be available.• Since the valve is simple and compact, handling is easy.• Antifreezing FV jackets are provided.

LP-9N Type, Level-Regulating Valve (for Water, for General Use)

VENN

By using the path to pilot piping as the bypass flow path, there is no influence of intermittent water supply of ball tap due to wave and silent and constant water supply is provided.

Constant Water Level Valve, with General-Purpose Adjustment Mechanism, LP-9HN Type

VENN

A general-purpose, constant-level valve equipped with an adjustment mechanism. Prevents red water. Therefore, the screw-in can be combined with pipe-end cores.[Features]· Equipped with a flow-rate adjustment mechanism and a valve closing-time needle adjustment.· A countermeasure against red water: Screw-in bronze body allowing for pipe end core assemblies.· Uses a bypass flow channel for the passage to the pilot pipe.Therefore, it provides a quiet and stable water supply without surges effecting the intermittent water supply from the ball tap.· A freeze-proof FV jacket is provided.

LP-8AN Level-Regulating Valve (for Water, Angled)

VENN

[Features]· Angle level-regulating valve which prevents red water by using bronze for the main body. The general flow rate adjustment mechanism makes it possible to adjust the water expulsion volume using an adjustment screw and the valve closing time using a needle valve.·When used in cold weather, residual water is minimized during drainage, and water is supplied steadily during rewatering.· The body is made of bronze, so it does not rust.· Two model series, one general-purpose with an adjustment mechanism and one for cold climates, are offered, so the user can choose a model according to the target application.· Antifreezing FV jacket is provided (except for the LP-8ARN model).

LP-8RN, Level-Regulating Valve (for Water, for Cold Areas)

VENN

By using a bypass flow path for the path to pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.[Features]· Constant water level valve for cold climates equipped with a drainage mechanism and a flow rate adjustment mechanism.· To prevent rusty water, the screw model can incorporate a pipe end core built into a bronze body.· Level-regulating valve suitable for use in cold regions.· Includes water drain mechanism and flow rate adjustment mechanism.· Rusty water countermeasures: a bypass flow path is used for the passage to pilot piping where the screw type can = body made of bronze + built-in pipe end core, enabling a quiet and steady water supply with no ball tap intermittent water supply effects due to surges

TD-8, 8 A Type Temperature Control Valve

VENN

[Features]It is a general purpose flange temperature regulating valve, so it is used for temperature regulation in hot water tanks, heat exchangers, heavy fuel heating apparatus, or used for cooling by passing water or refrigerants, or used at low temperatures when the surrounding atmospheric temperature is higher than the set temperature, or when the set temperature is 40°C or less.

TD-2 Type Series, Temperature Control Valve

VENN

Heating, cooling, and low temperature models are available.[Features]· General purpose flange type temperature adjustment valve, available for heating applications such as hot water tanks, heat exchangers, and heavy oil heaters, for cooling applications using water or a refrigerant, and low temperature applications where the set temperature is below the ambient temperature or where the set temperature is 40°C or below.