Insert（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Tangless Insert

  SUNCO

  [Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20[Material] Stainless Steel[Surface Processing] Bare

  • Volume Discount

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 20	Tangless	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D	-	Provided	-	Standard	Low Quantity (Available beginning with 1 pc.)

  From: 50,272 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sprue Insertion Tool INP Narrow Eye

  SUNCO

  [Outer Diameter - Pitch] M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  8 ～ 20	Tool	-	Metric (Fine) Thread	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 1,766,646 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E-Sert 2 Piece Tap Set UNC

  SUNCO

  [Nominal W]#2-56 to 11/4-7 "Screw Type" unified (coarse) thread

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	Unified (Coarse) Thread	-	-	-	1/4 ～ #10-24	-	Low Quantity (Available beginning with 1 pc.)

  From: 927,335 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nut, Screw-in Type, Insertion Jig, Dedicated for Without Slot / IR-00

  HIROSUGI-KEIKI

  * Only products without slits can be used.Applicable Product Numbers: IRB-W, IRB-CW, IRB, IRB-C, IRU-W, IRU, IRL-KW, IRL-BW, IRL-K, IRL-B

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	Box, Pkg.

  From: 2,633,806 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R

  HIROSUGI-KEIKI

  * Only products with slits can be used.Applicable Product Numbers: IRB-SW, IRB-SCW, IRU-SW, IRB-S, IRB-SC, IRU-S

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	Box, Pkg.

  From: 393,133 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coil Thread R

  ACCURATE

  · Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.· Newly-developed insertion tool reduces mistakes and increases speed of work.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 6	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D	Light Metal / Cast Iron / Resin General	-	-	-	-

  From: 18,125 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tangless Inserts Installation/Removal Tools

  MISUMI

  Due to changes in manufacturer standards, the color of the cap may vary. Thank you for your understanding. There is no change in performance.

  • Volume Discount

  CAD ：

  2D / 3D

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 4,349,159 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Floating Fastener【1-1,000 Pieces Per Package】

  SEL JAPAN

  Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 4	Swaged	Steel / Stainless Steel (SUS303/304)	Metric (Coarse) Thread	-	Light Metal	Not Provided	-	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 30,458 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sprue【1-100 Pieces Per Package】

  NIPPON SPREW

  Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.

  • Volume Discount

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 30	Standard	Stainless Steel (SUS303/304) / Phosphor Bronze	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 13,541 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E-Sert Unified (UNF)

  TSUGAMI

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Standard	Stainless Steel (SUS303/304)	Unified (Fine) Thread	-	Light Metal / Cast Iron / Resin General	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 24,606 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.6 ～ 8	Standard	Brass	Metric (Coarse) Thread	1.5D / 2D / 2.5D	Resin General	Not Provided	-	Standard	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 10,045 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil-Free (mm) SUS304

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.5 ～ 42	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 15,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil-Free, Special Size

  RECOIL

  Recoil, threaded insert, recoil-free special size. [Thread Type]Coarse. "Material" SUS304

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 8	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	0.5D / 0.8D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 32,921 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tangless Insert (SUS304)

  RECOIL

  [Features]·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.·Dedicated tools enable the insertion and extraction without tangs.·Extraction will not damage the male threads nor the product.·You don't have to tear off the tang, look for the broken tang, or check the gauge.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.5 ～ 12	Tangless	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D	Light Metal	Not Provided / Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 17,301 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Brass Ensat Thread Plastic Deformation Type, Model 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 6	Self-Tapping	Brass	Metric (Coarse) Thread	-	-	-	-	Standard	Low Quantity (Available beginning with 1 pc.)

  From: 17,143 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  Ensat 3 Holes Short Type, Model 307

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 16	Self-Tapping	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	Metric (Coarse) Thread	-	-	-	-	3-Hole Type	Low Quantity (Available beginning with 1 pc.)

  From: 27,610 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 16	Self-Tapping	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	Metric (Coarse) Thread	-	-	-	-	3-Hole Type	Low Quantity (Available beginning with 1 pc.)

  From: 30,291 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tangless insert unified insertion tool (for locking)

  ACCURATE

  A dedicated locking-type insertion tool.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	-

  From: 8,645,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tangless insert metric coarsetaping packaging

  ACCURATE

  We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.5 ～ 5	Tangless	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D	Light Metal / Cast Iron / Resin General	-	-	-	-

  From: 14,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】

  SUNCO

  [Nominal][Material] Stainless Steel[Surface Processing] Bare

  • Volume Discount

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Standard	Stainless Steel (SUS303/304)	Unified (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D	-	Provided	1"-8 ～ #10-24	Slotted	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 50,628 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Insertion Tool INS

  SUNCO

  [Nominal M] 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36[Nominal W] 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 1-8

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  6 ～ 30	Tool	-	Metric (Coarse) Thread / Unified (Coarse) Thread	-	-	-	1/4 ～ 5/8	-	Low Quantity (Available beginning with 1 pc.)

  From: 755,220 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.6 ～ 8	Self-Tapping	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	Cast Iron	Not Provided	-	Standard	Box, Pkg.

  From: 21,018 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less[Treatment] Black anodized (BAL)/Kanigen plating

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.6 ～ 8	Self-Tapping	Aluminum	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	Light Metal	Not Provided	-	Standard	Box, Pkg.

  From: 28,986 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.6 ～ 8	Self-Tapping	Brass	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	Light Metal	Not Provided	-	Slotted	Box, Pkg.

  From: 12,651 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2.6 ～ 8	Self-Tapping	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	Cast Iron	Not Provided	-	Slotted	Box, Pkg.

  From: 26,595 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mounting Tool (TWM, HDM)

  IMAO CORPORATION

  [Features]Mounting tool for KIC (Key Lock Insert). [Specifications]Material: SUJ2

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	-

  From: 665,218 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lock Sprue【1-100 Pieces Per Package】

  NIPPON SPREW

  This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  4 ～ 10	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D / 3D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 16,878 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Offers the strongest tension and other strengths over other inserts.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 8	Standard	Brass	Metric (Coarse) Thread	1.5D / 2D	Resin General	Not Provided	-	Standard	-

  From: 6,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C TEC (CT Type)【100 Pieces Per Package】

  BOHSEI

  Verification work on the embedded direction is not necessary because both ends have the same shape, which allows for faster work. Recommended when considering the use of parts feeders for automation.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3	Press Fit	Brass	Metric (Coarse) Thread	-	Resin General	-	-	Standard	-

  From: 422,182 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Trade series recoil kit (UNC)

  RECOIL

  Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.[Features]· A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.· The following parts are included in the red plastic box.· Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).· The spark plug kit includes a pilot tap.· The pilot tap does not use a drill

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	Stainless Steel (SUS303/304)	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 1,548,906 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil Packet (UNC)【10 Pieces Per Package】

  RECOIL

  *Unfortunately, only lengths of 1.5D are available.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Standard	Stainless Steel (SUS303/304)	Unified (Coarse) Thread	1.5D	Light Metal	Provided	1/4-20 ～ 7/16-14	-	Box, Pkg.

  From: 135,711 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil Tap

  RECOIL

  [Features]· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts. · Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads. · In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt. · Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead. · Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 14	Tool	-	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 434,520 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil-Free (Specified mm) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  12 ～ 24	Standard	Stainless Steel (SUS303/304)	Metric (Fine) Thread	1.5D / 2D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 54,833 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lock Recoil (mm) SUS304

  RECOIL

  Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 20	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D / 1.5D / 2D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 25,748 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 24	Standard	Phosphor Bronze	Metric (Coarse) Thread	1D / 1.5D / 2D	Light Metal	Provided	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 24,770 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Recoil Packet (METRIC)【10 Pieces Per Package】

  RECOIL

  [Features]· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.· Once equipped, its spring effect makes it almost permanently non-extractable.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2	Standard	Stainless Steel (SUS303/304)	Metric (Coarse) Thread	1D	-	-	-	-	Box, Pkg.

  From: 603,060 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Extraction Tool

  RECOIL

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: 758,315 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coil Insertion Tool - Manual

  S TEC

  [Explanation] ・Heli Coil Tool (manual), which is a tool to insert with special tool when inserting coil [Features] · Tool with high magnetic insert for coil insertion · No possibility that the coil will flow down •Related keywords: Estech, special tool for screw insert

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	-

  From: 724,320 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Tool

  RECOIL

  • Volume Discount

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  -	Tool	-	-	-	-	-	-	-	-

  From: 777,068 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coil Tap

  RECOIL

  • Volume Discount

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 30	Tool	-	Metric (Coarse) Thread / Metric (Fine) Thread / Unified (Coarse) Thread	-	-	-	-	-	-

  From: 832,339 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ensat Chip Free Short Type, Model 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 12	Self-Tapping	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	Metric (Coarse) Thread	-	-	-	-	Tip Free Type	Low Quantity (Available beginning with 1 pc.)

  From: 26,870 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  4 ～ 16	Self-Tapping	Steel	Metric (Coarse) Thread	-	-	-	-	Small O.D. 3-Hole Type	-

  From: 31,885 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVEIT

  [Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 10	Press Fit	Brass	Metric (Coarse) Thread	1D / 1.5D / 2D / 2.5D	-	Not Provided	-	Standard	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.

  From: 6,655 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sparrow (Type SP)

  JAPAN DRIVEIT

  [Type] Press Fit Use[Application] Resin: General [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)[L](D = screw diameter M) 1D 1.5D 2D [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  2 ～ 6	Press Fit	Brass	Metric (Coarse) Thread	1D / 1.5D / 2D	Resin General	Not Provided	-	Standard	Low Quantity (Available beginning with 1 pc.)

  From: 6,881 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  B-LOK N42 Type

  JAPAN DRIVEIT

  [Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, with notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)[L](D = screw diameter M) 1.5D 2D

  Screw Dia. M (after insertion)(mm)	Type	Material	Screw Type	Length L (after insertion) (D = Thread Dia. M)	Application	Notch	Thread Dia. (After inserted), Unified(inch)	Shape	Sales Unit
  3 ～ 6	Press Fit	Brass	Metric (Coarse) Thread	1.5D / 2D	-	Not Provided	-	Standard	-

  From: 26,733 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Screw Dia. M (after insertion)(mm)
Type
Material
Screw Type
Length L (after insertion) (D = Thread Dia. M)
Application
Notch
Thread Dia. (After inserted), Unified(inch)
Shape
Sales Unit

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUNCO	SUNCO	SUNCO	HIROSUGI-KEIKI	HIROSUGI-KEIKI	ACCURATE	MISUMI	SEL JAPAN	NIPPON SPREW	TSUGAMI	TOKAI METAL INDUSTRY	RECOIL	RECOIL	RECOIL	KKV	KKV	KKV	ACCURATE	ACCURATE	SUNCO	SUNCO	HIROSUGI-KEIKI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	IMAO CORPORATION	NIPPON SPREW	TOKAI METAL INDUSTRY	BOHSEI	RECOIL	RECOIL	RECOIL	RECOIL	RECOIL	RECOIL	RECOIL	RECOIL	S TEC	RECOIL	RECOIL	KKV	KKV	JAPAN DRIVEIT	JAPAN DRIVEIT	JAPAN DRIVEIT
Product SeriesDòng sản phẩm	Stainless Steel Tangless Insert	Sprue Insertion Tool INP Narrow Eye	E-Sert 2 Piece Tap Set UNC	Insert Nut, Screw-in Type, Insertion Jig, Dedicated for Without Slot / IR-00	Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R	Coil Thread R	Tangless Inserts Installation/Removal Tools	Self Floating Fastener【1-1,000 Pieces Per Package】	Sprue【1-100 Pieces Per Package】	E-Sert Unified (UNF)	Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】	Recoil-Free (mm) SUS304	Recoil-Free, Special Size	Tangless Insert (SUS304)	Brass Ensat Thread Plastic Deformation Type, Model 305	Ensat 3 Holes Short Type, Model 307	Ensat, Type 308, 3-Hole / Long Size	Tangless insert unified insertion tool (for locking)	Tangless insert metric coarsetaping packaging	Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】	Screw Insertion Tool INS	Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W	Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW	Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC	Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW	Mounting Tool (TWM, HDM)	Lock Sprue【1-100 Pieces Per Package】	Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】	C TEC (CT Type)【100 Pieces Per Package】	Trade series recoil kit (UNC)	Recoil Packet (UNC)【10 Pieces Per Package】	Recoil Tap	Recoil-Free (Specified mm) SUS304	Lock Recoil (mm) SUS304	Insert Phosphor Bronze	Recoil Packet (METRIC)【10 Pieces Per Package】	Extraction Tool	Coil Insertion Tool - Manual	Insert Tool	Coil Tap	Ensat Chip Free Short Type, Model 337	Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347	Techlock (SL)【1-5,000 Pieces Per Package】	Sparrow (Type SP)	B-LOK N42 Type
CADCAD							2D / 3D
From	50,272 VND	1,766,646 VND	927,335 VND	2,633,806 VND	393,133 VND	18,125 VND	4,349,159 VND	30,458 VND	13,541 VND	24,606 VND	10,045 VND	15,926 VND	32,921 VND	17,301 VND	17,143 VND	27,610 VND Special Price On Sale Till 31/03/2025	30,291 VND	8,645,038 VND	14,676 VND	50,628 VND	755,220 VND	21,018 VND	28,986 VND	12,651 VND	26,595 VND	665,218 VND	16,878 VND	6,353 VND	422,182 VND	1,548,906 VND	135,711 VND	434,520 VND	54,833 VND	25,748 VND	24,770 VND	603,060 VND	758,315 VND	724,320 VND	777,068 VND	832,339 VND	26,870 VND	31,885 VND	6,655 VND	6,881 VND	26,733 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	11 Day(s) or more	13 Day(s) or more	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	Same day or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s)	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Screw Dia. M (after insertion)(mm)	2 ～ 20	8 ～ 20	-	-	-	3 ～ 6	-	3 ～ 4	2 ～ 30	-	2.6 ～ 8	2.5 ～ 42	3 ～ 8	2.5 ～ 12	3 ～ 6	3 ～ 16	3 ～ 16	-	2.5 ～ 5	-	6 ～ 30	2.6 ～ 8	2.6 ～ 8	2.6 ～ 8	2.6 ～ 8	-	4 ～ 10	3 ～ 8	3	-	-	2 ～ 14	12 ～ 24	3 ～ 20	3 ～ 24	2	-	-	-	2 ～ 30	3 ～ 12	4 ～ 16	2 ～ 10	2 ～ 6	3 ～ 6
Type	Tangless	Tool	Tool	Tool	Tool	Standard	Tool	Swaged	Standard	Standard	Standard	Standard	Standard	Tangless	Self-Tapping	Self-Tapping	Self-Tapping	Tool	Tangless	Standard	Tool	Self-Tapping	Self-Tapping	Self-Tapping	Self-Tapping	Tool	Standard	Standard	Press Fit	Tool	Standard	Tool	Standard	Standard	Standard	Standard	Tool	Tool	Tool	Tool	Self-Tapping	Self-Tapping	Press Fit	Press Fit	Press Fit
Material	Stainless Steel (SUS303/304)	-	-	-	-	Stainless Steel (SUS303/304)	-	Steel / Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304) / Phosphor Bronze	Stainless Steel (SUS303/304)	Brass	Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304)	Brass	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	-	Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304)	-	Stainless Steel (SUS303/304)	Aluminum	Brass	Stainless Steel (SUS303/304)	-	Stainless Steel (SUS303/304)	Brass	Brass	Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304)	-	Stainless Steel (SUS303/304)	Stainless Steel (SUS303/304)	Phosphor Bronze	Stainless Steel (SUS303/304)	-	-	-	-	Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F)	Steel	Brass	Brass	Brass
Screw Type	Metric (Coarse) Thread	Metric (Fine) Thread	Unified (Coarse) Thread	-	-	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Unified (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Unified (Coarse) Thread	Metric (Coarse) Thread / Unified (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Unified (Coarse) Thread	-	Metric (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	Metric (Coarse) Thread / Metric (Fine) Thread / Unified (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread
Length L (after insertion) (D = Thread Dia. M)	1D / 1.5D / 2D	-	-	-	-	1D / 1.5D / 2D	-	-	1D / 1.5D / 2D / 2.5D / 3D	-	1.5D / 2D / 2.5D	1D / 1.5D / 2D / 2.5D / 3D	0.5D / 0.8D	1D / 1.5D / 2D / 2.5D / 3D	-	-	-	-	1D / 1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	-	1D / 1.5D / 2D / 3D	1.5D / 2D	-	-	1.5D	-	1.5D / 2D	1D / 1.5D / 2D	1D / 1.5D / 2D	1D	-	-	-	-	-	-	1D / 1.5D / 2D / 2.5D	1D / 1.5D / 2D	1.5D / 2D
Application	-	-	-	-	-	Light Metal / Cast Iron / Resin General	-	Light Metal	Light Metal	Light Metal / Cast Iron / Resin General	Resin General	Light Metal	Light Metal	Light Metal	-	-	-	-	Light Metal / Cast Iron / Resin General	-	-	Cast Iron	Light Metal	Light Metal	Cast Iron	-	Light Metal	Resin General	Resin General	-	Light Metal	-	Light Metal	Light Metal	Light Metal	-	-	-	-	-	-	-	-	Resin General	-
Notch	Provided	-	-	-	-	-	-	Not Provided	Provided	Provided	Not Provided	Provided	Provided	Not Provided / Provided	-	-	-	-	-	Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	-	Provided	Not Provided	-	-	Provided	-	Provided	Provided	Provided	-	-	-	-	-	-	-	Not Provided	Not Provided	Not Provided
Thread Dia. (After inserted), Unified(inch)	-	-	1/4 ～ #10-24	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1"-8 ～ #10-24	1/4 ～ 5/8	-	-	-	-	-	-	-	-	-	1/4-20 ～ 7/16-14	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shape	Standard	-	-	-	-	-	-	-	-	-	Standard	-	-	-	Standard	3-Hole Type	3-Hole Type	-	-	Slotted	-	Standard	Standard	Slotted	Slotted	-	-	Standard	Standard	-	-	-	-	-	-	-	-	-	-	-	Tip Free Type	Small O.D. 3-Hole Type	Standard	Standard	Standard
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	-	-	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	-	-	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.) / Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-

Loading...Tải…