Knob Screws（Mounting Section, Surface Treatment：None Page2）

Ergonomic Seven Lobed Knobs (ELK)

IMAO CORPORATION

[Features]· The dimples on the side of the knob are designed based on ergonomics and give a comfortable grip feeling, and a lot of tightening can be achieved with little force.- Although the standard color of the top of the main unit is black, we also accept orders for orange, gray, yellow, light blue, and red

CAD ：

2D / 3D

Starfish Knob (SFK)

IMAO CORPORATION

[Features]· SUS The product is perfectly rustproof, ideal for food machinery and sanitary equipment.· This is a flat shape which prevents clogging from dirt.· Chrome plating is resistant to wear and rubbing, it is resistant to sea water/detergent acetone/ethyl alcohol/chlorine solution.· It is also suitable for facilities requiring frequent cleaning and its good for outdoor use.

CAD ：

2D / 3D

Plastic Knob BA/BB

KONISHI

A safe knob that is round and has no protrusions.[Features]・ Made of black and red phenolic resin, the surface of the sphere is glossy and beautiful・ Operating temperature: -20 to +110℃[Applications]・ Can be used as a knob by screwing into the tip of the shaft

CAD ：

2D

Seven Lobed Knob - SLK, SLK-Sus

KONISHI

Matte black nylon (glass fiber reinforced) resin male thread. The thread is made of steel, the surface is trivalent chromate treated and made of stainless steel. Operating temperature max80° C min-20° C

CAD ：

2D

Knob Nut Black

MITSUBOSHI CI

It is a glossy surface product in which you can insert a molded bolt, or a specially processed reinforced plastic nut.

Five-Lobe Knob, TFKB Type/TFKN Type

TRUSCO NAKAYAMA

● It is a pentagon shape knob that feels familiar in the hand.● For machines, tools, office equipment, OA equipment etc.

Quick Clamp Knob _KQC

NABEYA BI-TECH

Even long screws can be tightened quickly.[Features]· It can be tightened quickly, even with long screws.· Please screw in the screw vertically straight into a hole and tighten it.· If the tightening length (A) of the screw is shorter than the extension height (H), you can not achieve sufficient tightness.· When designing, please ensure the screw tightening length (A) is not less than the total height (H) of the knob

CAD ：

2D / 3D

Plastic Ball _PB/PC

NABEYA BI-TECH

Plastic Ball Knob_PB/PCKnobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Ball or Spherical● Thread Size : M6, M8, M10 and M12● Material : Phenol Resin and Melamine Resin● Color : Black and Red[Application]Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on

CAD ：

2D / 3D

Clamp Knob KCF

NABEYA BI-TECH

Clamp Knob KCFKnob Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Clamp Knob● Thread Size : M5, M6, M8, M10 and M12● Material : Steel S45C and Stainless Steel SUS303[Application]Clamp Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on

CAD ：

2D / 3D

Seven Lobed Knob_KSM/KSF

NABEYA BI-TECH

The septogon is an ideal form for the human hand.

CAD ：

2D / 3D

Spin Knob with Flange_EAC

NABEYA BI-TECH

You can select the spin color.

CAD ：

2D / 3D

Plastic Wing Knobs_KEM/KEF

NABEYA BI-TECH

[Features]·T-shaped plastic knob.·Male or female threads can be selected according to the product code.·KEM: Male screw.·KEF: Female thread.[Applications]·When you want to install and remove screws without tools.

CAD ：

2D / 3D

Aluminum Cross Knob (ALCK)

IMAO CORPORATION

Aluminum cross knob that uses a cross shape and which can strongly tighten. It is also light.

CAD ：

2D / 3D

Tapped Blind Knob (BTK)

IMAO CORPORATION

These stainless steel screws are optimal for use in food machinery and sanitary equipment. Operating temperature -20°C to 110°C.[Features]· SUS The product is perfectly rustproof, ideal for food machinery and sanitary equipment.· Flat shape and dirt resistant

CAD ：

2D / 3D

Engineering Plastic Knob (EK)

IMAO CORPORATION

There are variations with hole, precision hole, male thread, female thread, stainless steel.

CAD ：

2D / 3D

Plastic Knurled Knob (SMK)

IMAO CORPORATION

[Features]· Utilizes commercially available hexagon bolts and hexagonal nuts, so knobs with suitable specifications can be made.

CAD ：

2D / 3D

Knurled Grip Knob (KGK/KGP/KGI)

IMAO CORPORATION

There are various types, such as no scale, with graduation, and with arrow available. It can also be used for the operation of a potentiometer (resistor).[Features]· It is easy to secure the shaft mounting of the set bolt.· The material has excellent resistance to most chemicals such as acid, alkali and grease, so it is optimal as the operation knob for oil equipment.· KGP, KGI with a pointer or scale (laser processing)

CAD ：

2D / 3D

Ergostyle Wing Nut (EWN/ENWN)

IMAO CORPORATION

[Features]· The shape of the wing designed based on ergonomics fits the fingers, and it does not hurt the hand, even when using strong force.·The cap can be easily removed by screwing in the bolt from the back and pushing it out.·Available with or without a cap.·The cap is available in 6 colors (orange, gray, yellow, light blue, black, and red).·The operating temperature is -30 to +130°C.[Applications]·Ideal for screw tightening points of various devices.

CAD ：

2D / 3D

Flute Knobs FTK-B, FTK-B-Sus

KONISHI

It is a male screw made of polished black polypropylene resin. The thread is made of steel, the surface is trivalent chromate treated and made of stainless steel. Operating temperature max80° C min-20° C

CAD ：

2D

Locking Key LK

KONISHI

[Features]· Made of matte black nylon (glass fiber reinforced) resin.· Female screw part made of brass.· Operating temperature max80° C, min-20° C.

CAD ：

2D

Engineering Plastic Knob (Stainless Steel) PK-Sus

KONISHI

Variations include the center hole, reamer hole and tap hole processed in the boss center, please choose one.

CAD ：

2D

Stainless-Steel (SUS303) Long-Shank Knurled Knob Fastener A-1176

TAKIGEN

Ideal for use in distribution boards, control boards, vending machines.

• Volume Discount

CAD ：

2D / 3D

Knurled Knob With Spring (A-1039 / Stainless Steel)

TAKIGEN

The feeling of the operation is nice due to the force of the spring, and when removing the door using that same force, you can flip up the knurled knob, allowing you to judge the disengagement point and improve its efficiency.Since the knob part is fixed to the detaching position of the door, the knob does not come off completely from the door and the work can be finished quickly.

CAD ：

2D / 3D

Plastic Parts, Tightening Handle Nut KRM-G Type

KYOWA

Tighten firmly. Tightening handle nut. Main body Polygon (cruciform), Type of mounting part Female thread (M), Female thread, Round hole processing, Blind hole, Main body material Polyamide, Mounting part material Brass, Mounting part surface treatment None

Knob Star A Type (Orange)【60-150 Pieces Per Package】

DAIMARU BYORA SEISAKUSHO

Body[Type] Polygonal mounting[Type] Male thread side part Not machined polygon[Type] Triangle addition function None Male thread end processing No body[Materials] Steel body[Surface Treatment] None Mounting Portion[Materials] Steel mounting part[Surface treatment] None Mounting part diameter d (mm) or nominal diameter 6 8 10 Body outer diameter D (ø) 36.5 40.5 46 Body height t (mm) 16 18 22[Unit of sale] Loose (available from 1 piece) Box· Pack

TKN (S-shaped Nut)

KOSTA

CAD ：

2D

SKN (Seven Knob Nut)

KOSTA

CAD ：

2D

T-Shaped Knob_KTAF

NABEYA BI-TECH

Aluminum T-shaped knob. The shape feels familiar in the hand and can handle a lot of force.

CAD ：

2D / 3D

Clamp Knob_KXM/KXF

NABEYA BI-TECH

Normally, the knob rotates free with no serration connected. If you hold down the knob, the serrations will engage and the screw can be adjusted.

CAD ：

2D / 3D

Dimple Knob_KRM/KRF/KRR

NABEYA BI-TECH

High quality and human design knob.[Features]·3 types: male screw KRM, KRMS/female screw KRF, KRFS/reamed hole KRR.·Reamed KRR hubs have guide holes for fixing pins.·Abundant screw sizes of M4-M10.·You can select the type and the material of the screw part by the product code.·Applying too much force when tightening may cause damage. Make sure that the resin cap and screw are firmly attached, and do not overtighten.[Applications]·When you want to install and remove screws without tools.

CAD ：

2D / 3D

Six Lobed Knob_KGF

NABEYA BI-TECH

Through-hole type knob. It is also convenient for tightening long screws.

CAD ：

2D / 3D

Puller Pentagonal Knob_KA/KB

NABEYA BI-TECH

Made of phenol resin with excellent durability

CAD ：

2D / 3D

Knurled Knob_KUM/KUF

NABEYA BI-TECH

Knurled Knob_KUM/KUFKnurled Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.[Feature]● Shape : Knurled Knobs● Thread Size : M3, M4, M5, M6, M8 and M10● Material :KUM - SWCH10RKUF - SUM22L[Application]Knurled Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on

CAD ：

2D / 3D

Fluted Knob (FTK)

IMAO CORPORATION

In female threads, brass, anti static, SUS model. The female screw is made of brass and is anti-static. The male screw is made of steel, and is anti-static, SUS and there are some variations made by the manufacturer.[Features]· SUS made by inserting it is the perfect rust preventive product using SUS

CAD ：

2D / 3D

Locking Key (LK, LS)

IMAO CORPORATION

[Features]SUS products are completely rust prevention and suitable for food machine and sanitary equipment.

CAD ：

2D / 3D

Knurled Thumb Knob (TKN/TKS)

IMAO CORPORATION

It is a knob with a flat side knurled shape and a slip resistant design.[Features]· Ideal for panel securing

CAD ：

2D / 3D

Star Knob (Key Specifications) (STK-LK)

IMAO CORPORATION

This is a plastic knob for security. It can not be removed without a key. It can be used outdoors. Operating temperature -30 degrees to 100 degrees.

CAD ：

2D / 3D

Three Lobe Knob (TK, TS)

IMAO CORPORATION

Resin made knob with a stylish design. Increase the added value of the device you attach it to. It can be used at temperatures between -30°C and 90°C.

CAD ：

2D / 3D

Tapped Lobe Knob (TLK)

IMAO CORPORATION

It is a plastic knob through which the boss screw thread passes. Operating temperature -20°C to 110°C.

CAD ：

2D / 3D

Five Lobe Knob (FK)

IMAO CORPORATION

Pentagonal resin knob with square hole specification for the boss. Operating temperature -30 degrees to 130 degrees.

CAD ：

2D / 3D