(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
YAMAWA MFG Spiral Taps（Screw size (Nominal)：M5）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
30 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 144,870 VND Special Price Days to Ship: Số ngày giao hàng: 9 Day(s) or more 
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] 0.8 ～ 0.9 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 203,175 VND Special Price Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 150,371 VND Special Price Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 230,050 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 156,090 VND Special Price Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P TiN Available 60 From: 458,553 VND Special Price Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP
YAMAWA MFG
[Features]· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 333,186 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL
YAMAWA MFG
A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.[Features]· Achieves a tool life triple or more that of SU-PO for SUS304.· Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.· By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] 0.8 High-speed steel Spiral Tap For through hole 5P - NA 60 From: 233,112 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For through hole 5P TiN Available 60 From: 566,552 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 ～ 62 From: 254,170 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL
YAMAWA MFG
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For through hole 5P TiN Available 60 From: 452,258 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Nickel Base Alloys_ZEN-B
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] 0.8 Powder high-speed steel Spiral Tap For blind hole 3P - NA 60 From: 420,125 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 161,700 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps 1.5P_SP-1.5P
YAMAWA MFG
■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.8 High-speed steel Spiral Tap For blind hole 1.5P - - 60 From: 221,231 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] 0.8 Powder high-speed steel Spiral Tap For through hole 5P - NA 60 From: 420,125 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Titanium Alloys_ZET-B
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] 0.8 Powder high-speed steel Spiral Tap For blind hole 3P - NA 60 From: 420,125 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 ～ 150 From: 283,784 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps, Coated_LS-SP-V
YAMAWA MFG
* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 From: 759,488 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P TiN Available 60 From: 602,511 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels_HC+SP
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 214,670 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 230,555 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 233,981 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Tough Stainless Steels_SU2-SP
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] 0.8 High-speed steel Spiral Tap For blind hole 3P - NA 60 From: 199,650 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum 1.5P_AL-SP-1.5P
YAMAWA MFG
[Features]· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] 0.8 High-speed steel Spiral Tap For blind hole 1.5P Nitriding Treatment Available 60 From: 220,110 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Carbide Taps_N-CT-SP
YAMAWA MFG
[Features]· A carbide spiral tap; ideal for mass-production tapping of materials such as aluminum casting (AC), aluminum die casting (ADC) and zinc diecasting (ZDC).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 Carbide Spiral Tap For blind hole 2.5P - NA 60 From: 3,826,283 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_LS-SU-S-SP
YAMAWA MFG
[Features]· A long-shank short-spiral tap for stainless steel; ideal for machining pilot holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P Other Available 100 ～ 150 From: 665,956 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps with Long Neck_LS-SP-K
YAMAWA MFG
[Features]· A long-shank spiral tap with a long neck. Used for deep tapping.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 ～ 150 From: 558,623 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.8 High-speed steel Spiral Tap For through hole 5P - Available 100 From: 1,048,433 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_LS-F-SP
YAMAWA MFG
[Features]· A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - Available 100 From: 1,048,433 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Fluted Taps
YAMAWA MFG
Coated Spiral Fluted Taps[Features]Durability is improved by premium powder HSS and special coating.Chip ejection efficiency is improved and cutting resistance is reduced by the unique cutting edge shape, achieving a good internal thread and long tool life.Proper tool projection length is secured, preventing chips from interfering with the holder.This is most suitable for tapping with water soluble cutting fluid.[Specifications]Tapping conditions [Ｍ3×0.5]Tapping Length: 4.5mmTapping Speed: 20m/minMachine: Machining center, vertical typeTapping Fluid: Water soluble cutting fluid[Materials]This is compatible with a wide range of steel work materials including general structural steel, carbon steel, and alloy steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Stainless steel (SUS)[○] - Powder high-speed steel Spiral Tap For blind hole - Other - 70 From: 522,353 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product SeriesDòng sản phẩm | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP | Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL | Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL | Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_LS-SU-S-SP | ||||||||||||||||||||||
| From | 144,870 VND Special Price On Sale Till 31/03/2025 | 203,175 VND Special Price On Sale Till 31/03/2025 | 150,371 VND Special Price On Sale Till 31/03/2025 | 230,050 VND | 156,090 VND Special Price On Sale Till 31/03/2025 | 458,553 VND Special Price On Sale Till 31/03/2025 | 333,186 VND | 233,112 VND | 566,552 VND | 254,170 VND- | 452,258 VND | 420,125 VND | 161,700 VND | 221,231 VND | 420,125 VND | 420,125 VND | 283,784 VND- | 759,488 VND | 602,511 VND | 214,670 VND | 230,555 VND- | 233,981 VND | 199,650 VND | 220,110 VND | 3,826,283 VND | 665,956 VND- | 558,623 VND- | 1,048,433 VND | 1,048,433 VND | 522,353 VND- |
| Days to ShipSố ngày giao hàng | 9 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 9 Day(s) | 4 Day(s) or more | 5 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 5 Day(s) | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) |
| Screw size (Nominal) | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Stainless steel (SUS)[○] |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 0.8 | 0.8 ～ 0.9 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | - |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel |
| Tap Type | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Hole type | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 5P | 2.5P | 5P | 3P | 2.5P | 1.5P | 5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 1.5P | 2.5P | 2.5P | 2.5P | 5P | 2.5P | - |
| Coating Type | - | - | - | - | - | TiN | - | - | TiN | - | TiN | - | - | - | - | - | - | - | TiN | - | - | - | - | Nitriding Treatment | - | Other | - | - | - | Other |
| Coating Y/N | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA | Available | NA | NA | - | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | Available | NA | Available | Available | - |
| Overall Length (L)(mm) | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 ～ 62 | 60 | 60 | 60 | 60 | 60 | 60 | 100 ～ 150 | 100 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 100 ～ 150 | 100 ～ 150 | 100 | 100 | 70 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- No.10
- No.1
- No.10UN
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.2
- No.3
- No.4
- No.4UN
- No.4-40UNC
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- No.6-32UNC
- No.8
- No.8UN
- NO.8-32UNC
- No.8-32UNC
- 1
- 1UNS
- M1
- PF 1
- PT 1"
- W1
- 1-8UNC
- 1 1/2
- PT 1 1/2
- W1"1/2
- 1 1/2-8UN
- 1 1/4
- PT 1 1/4
- PT 1"1/4
- W1"1/4
- 1 1/4-8UN
- 1 1/8
- W1"1/8
- 1 1/8-8UN
- 1/2
- 1/2UN
- PF 1/2
- PT 1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-13UNC
- 1/2-12W
- 1/2W12
- 1 3/4
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- PF 1/4
- PT 1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- 1 5/8
- 1 5/8-8UN
- 1 7/8-8UN
- 1'W8
- 1/8
- PF 1/8
- PT 1/8
- SM1/8
- W1/8
- 1 12
- PT 1/16
- 1 20
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- 2
- M2
- 2-8UN
- 2 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- M 3.0
- 3/4
- 3/4UN
- PF 3/4
- PT 3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8-UNJ
- 3/8UN
- PF 3/8
- PT 3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/8W16
- 3/16
- SM3/16
- 3/32
- SM3/32
- M3.5
- M3.5
- 4M
- M4
- M4.0
- M 4.0
- M4.5
- M4.5
- 5M
- M5
- M5.0
- M5
- M 5.0
- 5/8
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16
- 5/16UN
- 5/16UNJ
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- 5.5M
- M5.5
- M5.5
- M6
- M6.0
- M 6.0
- M7
- M7
- M 7.0
- 7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- #8
- M8
- M8.0
- M 8.0
- M9
- M9
- 9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- M10
- M10.0
- M10
- Tr 10
- M11
- M11
- 11/2
- 11/4
- 11/8
- 11/16
- 11/64
- SM11/64
- M12
- M12.0
- M12
- Tr 12
- 12-1.0-2
- M13
- 13/4
- 13/8
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- M16
- M16.0
- M16
- Tr 16
- M17
- 17/8
- 17/16
- M18
- M18.0
- M18
- Tr 18
- M19
- M20
- M20.0
- M20
- Tr 20
- M22
- M22.0
- M22
- Tr 22
- 22-1.0
- M23
- M24
- M24.0
- M24
- Tr 24
- 24-2.0-2
- M25
- Tr 25
- M26
- Tr 26
- M27
- M28
- Tr 28
- M30
- M30.0
- Tr 30
- M32
- M33
- M34
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
- M56
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 11
- 11 UNC
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy