(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
70 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.10 ~ M48 | Meter / unified / Whitworth / Sewing Machine | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 64 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 36 ~ 195 |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.0 ~ M48 | Meter / unified / Sewing Machine | Zinc Alloy Casting (ZDC)[○] | 0.2 ~ 100 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | - | NA | 36 ~ 185 |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Dry Tapping, Coated_OL+RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.10 ~ M6 | Meter / unified | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 64 | Powder high-speed steel | Roll tap | For through hole | 4P | TiCN | Available | 36 ~ 62 |
From: 393,122 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.10 ~ M48 | Meter / unified / Whitworth / Sewing Machine | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 64 | High-speed steel | Point tap | For through hole | 5P | - | NA | 36 ~ 185 |
From: 140,051 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M2 ~ M12 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.4 ~ 1.75 | High-speed steel | Spiral Tap | For blind hole | 2.5P | TiN | Available | 42 ~ 82 |
From: 449,897 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11 ~ 7/8-14 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | - | NA | 55 ~ 145 |
From: 409,830 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1/2-13UNC ~ M30 | Meter / unified / Whitworth | Zinc Alloy Casting (ZDC)[○] | 0.4 ~ 3.5 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 42 ~ 135 |
From: 228,258 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.4 ~ M30 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.3 ~ 3.5 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | - | NA | 36 ~ 135 |
From: 180,180 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ M48 | Meter / unified | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 24 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | - | NA | 70 ~ 300 |
From: 455,100 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ M36 | Meter / unified / Whitworth | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 24 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 70 ~ 300 |
From: 283,784 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M2 ~ M24 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.4 ~ 3 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 42 ~ 135 |
From: 200,640 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1 ~ M6 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 1 | High-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiN | Available | 36 ~ 62 |
From: 377,150 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M2 ~ M6 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.4 ~ 1 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 42 ~ 62 |
From: 147,422 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 ~ M12 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 1.75 | High-speed steel | Spiral Tap | For blind hole | 2.5P | TiN | Available | 46 ~ 82 |
From: 555,898 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 ~ M16 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 2 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 46 ~ 95 |
From: 160,050 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.4 ~ M20 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.3 ~ 2.5 | Carbide | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | - | NA | 34 ~ 105 |
From: 1,870,873 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1 ~ M10 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 1.5 | High-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | - | NA | 36 ~ 75 |
From: 185,130 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Parallel Pipe Threads_NPS
YAMAWA MFG
■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1/2-14 ~ 1/8-27 | Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 5P | - | NA | 55 ~ 80 |
From: 888,573 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 ~ M12 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 1.75 | High-speed steel | Point tap | For through hole | 5P | TiN | Available | 46 ~ 82 |
From: 436,914 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.10-32UNF ~ M20 | Meter / unified | Zinc Alloy Casting (ZDC)[○] | 0.25 ~ 1.75 | Powder high-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiCN | Available | 36 ~ 105 |
From: 386,979 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_PF
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 7/8 | Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 1.5P ~ 3.5P | - | NA | 55 ~ 105 |
From: 426,094 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 ~ M12 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 1.75 | High-speed steel | Spiral Tap | For through hole | 5P | TiN | Available | 46 ~ 82 |
From: 530,159 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.[Features]· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.· Screw precision in accordance with class 1b.· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.[Applications]Ideal for machining female threads for inserting insert coils after threading.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
No.10 ~ M24 | Meter / unified | Zinc Alloy Casting (ZDC)[◎] | 0.45 ~ 48 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | Non-Coated | NA | 52 ~ 135 |
From: 235,620 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Dryseal Taper Pipe Threads_NPTF
YAMAWA MFG
Tap for machining American taper pipe "NPTF" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered thread for dry seal pipe "NPTF" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11.5 ~ 3/8-18 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 3P | - | NA | 54 ~ 105 |
From: 987,666 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered pipe thread for pipes "NPT" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11.5 ~ 3/8-18 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 3P | - | NA | 54 ~ 120 |
From: 609,510 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1 ~ M6 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.2 ~ 1 | Powder high-speed steel | Roll tap | For blind hole | 1P | TiCN | Available | 36 ~ 62 |
From: 597,733 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Pointed Taps_+PO
YAMAWA MFG
A point tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 ~ M6 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 1 | High-speed steel | Point tap | For through hole | 5P | - | NA | 46 ~ 62 |
From: 206,948 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads_Rc
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11 ~ 3/8-19 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | - | NA | 59 ~ 140 |
From: 500,651 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11 ~ 3/8-19 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | - | NA | 55 ~ 155 |
From: 502,618 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps for Parallel Pipe Threads_LS-PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 3/8 | Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 3.5P | - | NA | 100 ~ 200 |
From: 1,150,820 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 ~ M20 | Meter | Zinc Alloy Casting (ZDC)[○] | 1 ~ 1.75 | Cobalt HSS | Spiral Tap | For through hole | 5P | TiCN | Available | 62 ~ 105 |
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 ~ M20 | Meter | Zinc Alloy Casting (ZDC)[○] | 1 ~ 1.75 | Cobalt HSS | Spiral Tap | For through hole / For blind hole | 2.5P | TiCN | Available | 62 ~ 105 |
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT
YAMAWA MFG
■ The S-NPT is a hand tap for the Americantapered pipe threads and is used for tappingwhere it is necessary to shorten the fittinglength for piping parts. Its main purpose istightness of threaded parts in connection withpipe parts etc.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11.5 ~ 3/8-18 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 3P | - | NA | 55 ~ 95 |
From: 973,833 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.4 ~ M3 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.3 ~ 0.5 | High-speed steel | Hand Tap | For blind hole | 1P | - | NA | 36 ~ 46 |
From: 277,891 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT
YAMAWA MFG
With the main purpose of this product to provide tightness of thread section in the connection of pipe parts, etc., this is a carbide hand tap for cast iron tapered pipe threads suitable for mass-produced threads made from hard and brittle materials such as cast iron. [Features]·Chamfer 2.5P; straight groove hand tap shape.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11 ~ 3/8-19 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | - | NA | 55 ~ 95 |
From: 5,571,120 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_G
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'1/4-11 ~ 3/8-19 | Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 3.5P | - | NA | 59 ~ 140 |
From: 461,985 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Parallel Pipe Threads_SP-PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1'-11 ~ 3/8-19 | Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For blind hole | 2.5P | - | NA | 55 ~ 110 |
From: 526,865 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Carbide Thread Mills for Metric Internal Threads_MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
06510X28R ~ 200505N300M | Meter / Taper for Pipe / Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | 0.5 ~ 3 | Carbide | Thread cutter | For through hole / For blind hole | - | TiAlN | Available | 50 ~ 140 |
From: 8,351,241 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Taps for Ultra Fast Tappings, Blind Hole Use, for Aluminum_HFACT-B
YAMAWA MFG
Carbide tap that makes ultra-high speed machining possible and a center-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for machining blind holes in aluminum cast iron and aluminum die castings, etc.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 ~ M12 | Meter | Zinc Alloy Casting (ZDC)[○] | 1 ~ 1.75 | Carbide | Point tap | For blind hole | 2.5P | TiAlN | Available | 62 ~ 82 |
From: 3,762,585 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SU Roll Tap for SURZ Metric Screw Thread
YAMAWA MFG
[Features]· A roll tap which realizes control of the inner diameter shape of female screws.[Applications]· Work materials: Stainless steel, carbon steel, alloy steel, and tool steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M3 | Meter | Zinc Alloy Casting (ZDC)[○] | 0.5 | Powder high-speed steel | Roll tap | For through hole / For blind hole | 2P | TiCN | Available | 46 |
From: 779,599 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M2 ~ M16 | Meter | Zinc Alloy Casting (ZDC)[◎] | 0.4 ~ 2 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | Nitriding Treatment | Available | 42 ~ 95 |
From: 269,118 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for longitudinal machining.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 ~ M20 | Meter | Zinc Alloy Casting (ZDC)[○] | 1 ~ 1.75 | Cobalt HSS | Spiral Tap | For through hole / For blind hole | 2.5P | TiCN | Available | 62 ~ 105 |
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M6 ~ M20 | Meter | Zinc Alloy Casting (ZDC)[○] | 1 ~ 1.75 | Cobalt HSS | Spiral Tap | For through hole / For blind hole | 2.5P | TiCN | Available | 62 ~ 105 |
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Thread Mills for Metric Internal Threads_MC-HLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1015 ~ 32506N300M | Meter / Taper for Pipe / Parallel for Pipes | Zinc Alloy Casting (ZDC)[○] | - | Cobalt HSS | Thread cutter | - | - | TiN | Available | 70 ~ 200 |
From: 7,843,266 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X
YAMAWA MFG
■ PT-X hand tap, adopting new tap blank, ensuresproperly long projection length of the tool.Having short thread length, this tap is suitablefor tapping of such machine components ashave the limit in their thickness.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
1/2-14 ~ 3/8-19 | Taper for Pipe | Zinc Alloy Casting (ZDC)[○] | - | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | - | NA | 75 ~ 105 |
From: 539,405 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
Product SeriesDòng sản phẩm | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP | Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT | Carbide Taps for Ultra Fast Tappings, Blind Hole Use, for Aluminum_HFACT-B | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP | X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X | |||||||||||||||||||||||||||||||||
From | - | - | 393,122 VND- | 140,051 VND Special Price On Sale Till 31/03/2025 | 449,897 VND Special Price On Sale Till 31/03/2025 | 409,830 VND- | 228,258 VND- | 180,180 VND- | 455,100 VND- | 283,784 VND- | 200,640 VND- | 377,150 VND- | 147,422 VND- | 555,898 VND- | 160,050 VND- | 1,870,873 VND- | 185,130 VND- | 888,573 VND- | 436,914 VND- | 386,979 VND- | 426,094 VND- | 530,159 VND- | 235,620 VND- | 987,666 VND- | 609,510 VND- | 597,733 VND- | 206,948 VND Special Price On Sale Till 31/03/2025 | 500,651 VND- | 502,618 VND- | 1,150,820 VND- | 679,270 VND- | 679,270 VND- | 973,833 VND- | 277,891 VND- | 5,571,120 VND- | 461,985 VND- | 526,865 VND- | 8,351,241 VND- | 3,762,585 VND- | 779,599 VND | 269,118 VND- | 679,270 VND- | 679,270 VND- | 7,843,266 VND- | 539,405 VND- |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 5 Day(s) or more | Same day or more | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | Same day or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | Same day or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) |
Screw size (Nominal) | No.10 ~ M48 | No.0 ~ M48 | No.10 ~ M6 | No.10 ~ M48 | M2 ~ M12 | 1'-11 ~ 7/8-14 | 1/2-13UNC ~ M30 | M1.4 ~ M30 | 1 ~ M48 | 1 ~ M36 | M2 ~ M24 | M1 ~ M6 | M2 ~ M6 | M3 ~ M12 | M3 ~ M16 | M1.4 ~ M20 | M1 ~ M10 | 1/2-14 ~ 1/8-27 | M3 ~ M12 | No.10-32UNF ~ M20 | 1 ~ 7/8 | M3 ~ M12 | No.10 ~ M24 | 1'-11.5 ~ 3/8-18 | 1'-11.5 ~ 3/8-18 | M1 ~ M6 | M3 ~ M6 | 1'-11 ~ 3/8-19 | 1'-11 ~ 3/8-19 | 1 ~ 3/8 | M6 ~ M20 | M6 ~ M20 | 1'-11.5 ~ 3/8-18 | M1.4 ~ M3 | 1'-11 ~ 3/8-19 | 1'1/4-11 ~ 3/8-19 | 1'-11 ~ 3/8-19 | 06510X28R ~ 200505N300M | M6 ~ M12 | M3 | M2 ~ M16 | M6 ~ M20 | M6 ~ M20 | 1015 ~ 32506N300M | 1/2-14 ~ 3/8-19 |
Screw Types | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Sewing Machine | Meter / unified | Meter / unified / Whitworth / Sewing Machine | Meter | Taper for Pipe | Meter / unified / Whitworth | Meter | Meter / unified | Meter / unified / Whitworth | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes | Meter | Meter / unified | Parallel for Pipes | Meter | Meter / unified | Taper for Pipe | Taper for Pipe | Meter | Meter | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Meter | Meter | Taper for Pipe | Meter | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Taper for Pipe |
work material | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 0.25 ~ 64 | 0.2 ~ 100 | 0.25 ~ 64 | 0.25 ~ 64 | 0.4 ~ 1.75 | - | 0.4 ~ 3.5 | 0.3 ~ 3.5 | 0.5 ~ 24 | 0.5 ~ 24 | 0.4 ~ 3 | 0.25 ~ 1 | 0.4 ~ 1 | 0.5 ~ 1.75 | 0.5 ~ 2 | 0.3 ~ 2.5 | 0.25 ~ 1.5 | - | 0.5 ~ 1.75 | 0.25 ~ 1.75 | 11 ~ 28 | 0.5 ~ 1.75 | 0.45 ~ 48 | - | - | 0.2 ~ 1 | 0.5 ~ 1 | - | - | 11 ~ 28 | 1 ~ 1.75 | 1 ~ 1.75 | - | 0.3 ~ 0.5 | - | - | - | 0.5 ~ 3 | 1 ~ 1.75 | 0.5 | 0.4 ~ 2 | 1 ~ 1.75 | 1 ~ 1.75 | - | - |
Tool Material Type | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Powder high-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel |
Tap Type | Spiral Tap | Hand Tap | Roll tap | Point tap | Spiral Tap | Tap for pipes | Spiral Tap | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Roll tap | Tap for pipes | Point tap | Roll tap | Tap for pipes | Spiral Tap | Hand Tap | Tap for pipes | Tap for pipes | Roll tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Tap for pipes | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Thread cutter | Point tap | Roll tap | Hand Tap | Spiral Tap | Spiral Tap | Thread cutter | Tap for pipes |
Hole type | For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole |
Chamfer threads (Lcf) | 2.5P | 1.5P ~ 5P | 4P | 5P | 2.5P | 2.5P | 2.5P | 1.5P ~ 5P | 1.5P ~ 5P | 2.5P | 2.5P | 2P ~ 4P | 2.5P | 2.5P | 2.5P | 1.5P ~ 5P | 2P ~ 4P | 5P | 5P | 2P ~ 4P | 1.5P ~ 3.5P | 5P | 1.5P ~ 5P | 3P | 3P | 1P | 5P | 2.5P | 2.5P | 3.5P | 5P | 2.5P | 3P | 1P | 2.5P | 3.5P | 2.5P | - | 2.5P | 2P | 1.5P ~ 5P | 2.5P | 2.5P | - | 2.5P |
Coating Type | - | - | TiCN | - | TiN | - | - | - | - | - | - | TiN | - | TiN | - | - | - | - | TiN | TiCN | - | TiN | Non-Coated | - | - | TiCN | - | - | - | - | TiCN | TiCN | - | - | - | - | - | TiAlN | TiAlN | TiCN | Nitriding Treatment | TiCN | TiCN | TiN | - |
Coating Y/N | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | Available | Available | NA | Available | NA | NA | NA | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | NA |
Overall Length (L)(mm) | 36 ~ 195 | 36 ~ 185 | 36 ~ 62 | 36 ~ 185 | 42 ~ 82 | 55 ~ 145 | 42 ~ 135 | 36 ~ 135 | 70 ~ 300 | 70 ~ 300 | 42 ~ 135 | 36 ~ 62 | 42 ~ 62 | 46 ~ 82 | 46 ~ 95 | 34 ~ 105 | 36 ~ 75 | 55 ~ 80 | 46 ~ 82 | 36 ~ 105 | 55 ~ 105 | 46 ~ 82 | 52 ~ 135 | 54 ~ 105 | 54 ~ 120 | 36 ~ 62 | 46 ~ 62 | 59 ~ 140 | 55 ~ 155 | 100 ~ 200 | 62 ~ 105 | 62 ~ 105 | 55 ~ 95 | 36 ~ 46 | 55 ~ 95 | 59 ~ 140 | 55 ~ 110 | 50 ~ 140 | 62 ~ 82 | 46 | 42 ~ 95 | 62 ~ 105 | 62 ~ 105 | 70 ~ 200 | 75 ~ 105 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy