(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
19 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
WDX Drill, for 4D Machining Depth
SUMITOMO ELECTRIC HARDMETAL
SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 63 | 114 ~ 362 | 55 ~ 260 | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - | - | Available | Available | TiAlN |
From: 10,032,305 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WDX Drill, for 2D Machining Depth
SUMITOMO ELECTRIC HARDMETAL
SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 68 | 88 ~ 246 | 29 ~ 144 | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - | - | Available | Available | TiAlN |
From: 8,293,697 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill External Refueling, GS-Model 4D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 10 | 49 ~ 105 | 12 ~ 60 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | For High Hardness (Silicon Group) |
From: 1,660,398 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-L, for 5D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12.0 or more, less than 12.5 ~ Over 41.0, and 42.5 or less | 130 ~ 335 | 69 ~ 235 | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 9,069,559 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Cutting force is greatly reduced by using Aurora Coat (DLC coat) and low resistance WL (wide L) thinning.・ High quality drilling is possible by devising the cutting edge and adopting WW (wide W) margin.・ Stable and long lifespan is achieved by Aurora Coat and cutting edge shape.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
5.1 ~ 6.8 | 100 ~ 109 | 44 ~ 56 | Cast Iron[○] / Aluminum[◎] / Copper[◎] | End Mill Shank | Carbide | Available | Available | DLC |
From: 3,086,726 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WDX Drill, for 5D Machining Depth
SUMITOMO ELECTRIC HARDMETAL
SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 36 | 127 ~ 278 | 68 ~ 184 | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - | - | Available | Available | TiAlN |
From: 10,901,805 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-D, for 8D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13.5 or more and 14.5 or less ~ Over 41.0, and 42.5 or less | 191.5 ~ 460 | 124.5 ~ 360 | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 11,601,537 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-M, for 3D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 105 ~ 230 | 44 ~ 135 | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 8,048,584 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large cutting edge treatment reduces damage to the cutting edge.・ With X-type thinning, stable drilling is achieved with excellent centripetal force when biting.[Applications]・ Ideal for high efficiency machining of general steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
17 ~ 23.5 | - | - | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 2,058,015 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill External Refueling, GS-Model 2D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a flute shape to enable excellent cutting chip disposal and discharge with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.2 ~ 12.6 | 45 ~ 100 | 10 ~ 49 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | For High Hardness (Silicon Group) |
From: 1,407,406 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Flat Multi-Drill MDF Type External Lubrication 2D Type
SUMITOMO ELECTRIC HARDMETAL
It is a solid carbide drill bit that can be used for various purposes such as high efficiency of counter boring and drilling on inclined surfaces and curved surfaces.[Features]・ It supports high efficiency counter boring, drilling on non-planar surfaces such as inclined surfaces and cylindrical surfaces, and intermittent drilling. Also effective in suppressing burr on the outlet side.・ It realizes high rigidity by adopting RS thinning with thick bottom.・ Wide cutting chip pocket and high-quality rake face shape provide excellent cutting chip discharge performance.・ It achieves high cutting edge strength with ideal cutting edge design.・ It supports machining of overhang length L/D = 10.・ It supports internal refueling. It realizes deeper hole processing.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | 16 ~ 43.2 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank / straight shank | Carbide | NA | Available | - |
From: 1,355,340 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-B3 (for bridge)
SUMITOMO ELECTRIC HARDMETAL
A multi-drill (for bridges) for SMD Series that achieves secure and strong clamping through unique radial serration and adopts a special surface treatment with excellent abrasion resistance and rust prevention.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
24.5~24.7 ~ 26.5~26.7 | 170 ~ 175 | 87 ~ 92 | general steel[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 10,233,352 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDT-MEL Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large thinning angle solves the defect of convex radius part peculiar to mild steel. With SUS material, welding defects at various parts are reduced.・ It improves the cutting performance of the outer periphery and prevents the occurrence of edge chipping at the cast iron hole exit.[Applications]・ Ideal for mild steel, gray cast iron, low rigidity equipment and difficult-to-cut materials such as stainless steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
19.5 ~ 22 | - | - | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 2,223,753 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WDX Drill, for 3D Machining Depth
SUMITOMO ELECTRIC HARDMETAL
SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 143 | 101 ~ 314 | 42 ~ 212 | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - | - | Available | Available | TiAlN |
From: 8,717,628 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 8D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.8 | 81 | 33 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] | End Mill Shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,446,085 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
7 | 109 | 56 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] | straight shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,466,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 3D Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Cutting force is greatly reduced by using Aurora Coat (DLC coat) and low resistance WL (wide L) thinning.・ High quality drilling is possible by devising the cutting edge and adopting WW (wide W) margin.・ Stable and long lifespan is achieved by Aurora Coat and cutting edge shape.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
8 | 94 | 40 | Cast Iron[○] / Aluminum[◎] / Copper[◎] | straight shank | Carbide | Available | Available | DLC |
From: 3,694,695 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HSS Multi Drill Short Type HMD-S Model
SUMITOMO ELECTRIC HARDMETAL
Uses an end mill shank to improve tool precision and rigidity. Achieves high cutting chip.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 13 | 38 ~ 108 | 6 ~ 51 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank | Powder high-speed steel | NA | Available | TiAlN |
From: 244,128 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HSS Multi Drill Regular Type HMD-M Model
SUMITOMO ELECTRIC HARDMETAL
Uses an end mill shank to improve tool precision and rigidity. Achieves high cutting chip.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.4 ~ 10 | 71 ~ 137 | 39 ~ 87 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank / straight shank | High-speed steel | NA | Available | TiAlN |
From: 369,045 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Overall Length L(mm) |
Groove Length L(mm) |
work material |
Shank Type |
Tool Material Type |
With/without Oil Hole |
Coating Y/N |
Coating Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
Product SeriesDòng sản phẩm | Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type | Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 3D Type | |||||||||||||||||
From | 10,032,305 VND- | 8,293,697 VND- | 1,660,398 VND- | 9,069,559 VND- | 3,086,726 VND- | 10,901,805 VND- | 11,601,537 VND- | 8,048,584 VND- | 2,058,015 VND- | 1,407,406 VND- | 1,355,340 VND- | 10,233,352 VND | 2,223,753 VND- | 8,717,628 VND- | 3,446,085 VND | 3,466,800 VND | 3,694,695 VND | 244,128 VND- | 369,045 VND- |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Hole diameter (drill diameter) D(mm) | 13 ~ 63 | 13 ~ 68 | 1 ~ 10 | 12.0 or more, less than 12.5 ~ Over 41.0, and 42.5 or less | 5.1 ~ 6.8 | 13 ~ 36 | 13.5 or more and 14.5 or less ~ Over 41.0, and 42.5 or less | 12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 17 ~ 23.5 | 2.2 ~ 12.6 | - | 24.5~24.7 ~ 26.5~26.7 | 19.5 ~ 22 | 13 ~ 143 | 2.8 | 7 | 8 | 1 ~ 13 | 3.4 ~ 10 |
Overall Length L(mm) | 114 ~ 362 | 88 ~ 246 | 49 ~ 105 | 130 ~ 335 | 100 ~ 109 | 127 ~ 278 | 191.5 ~ 460 | 105 ~ 230 | - | 45 ~ 100 | - | 170 ~ 175 | - | 101 ~ 314 | 81 | 109 | 94 | 38 ~ 108 | 71 ~ 137 |
Groove Length L(mm) | 55 ~ 260 | 29 ~ 144 | 12 ~ 60 | 69 ~ 235 | 44 ~ 56 | 68 ~ 184 | 124.5 ~ 360 | 44 ~ 135 | - | 10 ~ 49 | 16 ~ 43.2 | 87 ~ 92 | - | 42 ~ 212 | 33 | 56 | 40 | 6 ~ 51 | 39 ~ 87 |
work material | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] |
Shank Type | - | - | End Mill Shank / straight shank | - | End Mill Shank | - | - | - | - | End Mill Shank / straight shank | End Mill Shank / straight shank | - | - | - | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank |
Tool Material Type | - | - | Carbide | - | Carbide | - | - | - | - | Carbide | Carbide | - | - | - | Carbide | Carbide | Carbide | Powder high-speed steel | High-speed steel |
With/without Oil Hole | Available | Available | NA | Available | Available | Available | Available | Available | Available | NA | NA | Available | Available | Available | Available | Available | Available | NA | NA |
Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
Coating Type | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | TiAlN | TiAlN |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy