(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.
SUMITOMO ELECTRIC HARDMETAL Cutters / Indexable End Mills（work material：Cast Iron）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
76 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Sumi UFO End Mill, UFO Model UFO-ER
SUMITOMO ELECTRIC HARDMETAL
[Features]·An end mill with a handle for general-purpose milling and slab milling, grooving, and chamfering of difficult-to-cut materials.Overall length (L) (mm): 120Shank diameter (d) (mm): 32Maximum cutting depth (Ad) (mm): 5.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 50 ～ 80 Cast Iron Rough and medium rough processing 120 4 ～ 6 With handle 32 40 5.5 - From: 13,673,387 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Standard Type WMM2000E
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove / Vertical 20 ～ 30 Cast Iron Rough and medium rough processing 130 ～ 150 3 ～ 5 With handle 20 ～ 25 35 ～ 50 17～35 - From: 5,573,262 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WEX Model WEX-F
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 40 ～ 63 Cast Iron Rough and medium rough processing - 4 ～ 6 Arbor - - 14 - From: 8,117,830 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WGC Model WGC(F)-RS
SUMITOMO ELECTRIC HARDMETAL
[Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 32 ～ 63 Cast Iron Rough and medium rough processing - 3 ～ 6 Arbor - - 4 ～ 6 - From: 5,870,112 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WFX Model WFX-E
SUMITOMO ELECTRIC HARDMETAL
A screw mount type cutter capable of using on 4 corners.Ideal blade shape provides favorable wall accuracy.[Features]・ The insert shape optimized for corner cutting and the high-precision body achieve excellent machining quality.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 40 ～ 80 Cast Iron Rough and medium rough processing 120 3 ～ 4 With handle 32 30 10 - From: 9,135,657 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Side / Groove 16 ～ 80 Cast Iron Rough and medium rough processing 100 ～ 160 1 ～ 4 With handle 16 ～ 32 25 ～ 45 8 ～ 16 - From: 2,754,596 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
A cutter that achieves high-efficiency machining with a maximum depth of cut of 8 mm, for high-efficiency flat surface machining of cast iron and cast steel.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 160 Cast Iron Rough and medium rough processing - 6 ～ 10 Arbor - - 8 - From: 13,213,654 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WEX Model WEX-E
SUMITOMO ELECTRIC HARDMETAL
Low resistance insert with reinforced cutting edge, high-precision cutting edge, high durability body, a wide range of insert variations, and all part numbers equipped with air holes.[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 25 ～ 63 Cast Iron Rough and medium rough processing 120 ～ 220 2 ～ 6 With handle 20 ～ 42 25 ～ 80 14 - From: 5,340,149 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill for WGX Type, WGXF-R(S)
SUMITOMO ELECTRIC HARDMETAL
Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 50 ～ 250 Cast Iron Rough and medium rough processing - 5 ～ 24 Arbor - - 6 - From: 9,983,912 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Long Type WMM2000EL
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove / Vertical 20 ～ 30 Cast Iron Rough and medium rough processing 185 ～ 230 3 ～ 5 With handle 20 ～ 25 35 ～ 75 17 ～ 35 - From: 6,230,699 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·This BN finish mill provides ultra-high speed milling of gray cast iron.Work material: Cast IronMaximum cutting depth (Ad) (mm): 0.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 160 Cast Iron Rough and medium rough processing - 6 ～ 12 Arbor - - 0.5 - From: 25,223,580 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 40 ～ 63 Cast Iron Rough and medium rough processing - - Arbor - - 10 - From: 12,273,924 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.cutting diameter D (⌀): 80, 105, 125, 157, 200Maximum cutting depth (Ad) (mm): 9.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 80 ～ 200 Cast Iron Rough and medium rough processing - 4 ～ 10 Arbor - - 9.5 - From: 11,903,304 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
A cutter that achieves high-efficiency machining with a maximum depth of cut of 8 mm, for high-efficiency flat surface machining of cast iron and cast steel.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 160 Cast Iron Rough and medium rough processing - 8 ～ 12 Arbor - - 8 - From: 15,428,323 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WFX-R For SEC-Wave Mill WFX Model
SUMITOMO ELECTRIC HARDMETAL
Screw locked cutter, enabling using 4 corners. Ideal blade shape provides favorable wall precision.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 50 ～ 250 Cast Iron Rough and medium rough processing - 3 ～ 12 Arbor - - 10 - From: 7,439,344 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WEX Model WEX-R
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 80 ～ 125 Cast Iron Rough and medium rough processing - 4 ～ 6 Arbor - - 14 - From: 11,574,193 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Standard Type WMM3000E
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove / Vertical 32 ～ 40 Cast Iron Rough and medium rough processing 150 ～ 160 4 With handle 32 50 ～ 55 39 - From: 6,485,057 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove / Vertical 32 ～ 40 Cast Iron Rough and medium rough processing 230 ～ 240 4 With handle 32 50 ～ 90 39 - From: 9,156,902 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sumi Boron BN Finish Mill EASY, for FMU-E Type FMU-ER
SUMITOMO ELECTRIC HARDMETAL
[Features]·A SUMIBORON BN finish mill for high speed finishing.cutting diameter D (⌀): 37, 47, 60Number of edges (Pcs.): 2, 3, 4Weight (kg): 1, 1.2
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 37 ～ 60 Cast Iron Rough and medium rough processing - 2 ～ 4 Arbor - - 0.5 - From: 16,832,900 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sumi Boron BN Finish Mill EASY, for FMU Type FMU-R
SUMITOMO ELECTRIC HARDMETAL
[Features]·This product enables quick blade runout adjustment by external settings.·It optimizes insert size to reduce running costs.Work material: Cast IronMaximum cutting depth (Ad) (mm): 0.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 200 Cast Iron Rough and medium rough processing - 6 ～ 16 Arbor - - 0.5 - From: 39,034,082 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Bore (for finishing) WBMF1000 Type
SUMITOMO ELECTRIC HARDMETAL
Unique high precision clamping method adopted. Good sharpness and great finished surface roughness. Use of Super ZX coating achieves superior wear resistance.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Groove 10 ～ 30 Cast Iron Finishing 100 ～ 350 - With handle 16 ～ 32 30 ～ 120 0.1~0.4 - From: 3,346,790 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Bore (rough machining long blade type), WBMR2000L Type
SUMITOMO ELECTRIC HARDMETAL
A sharp, low-resistance, wave blade type with a high rake angle. Strong anti-rotation mechanism suppresses tip movement while cutting.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Groove 20 ～ 50 Cast Iron Rough and medium rough processing 140 ～ 350 - With handle 25 ～ 50.8 60 ～ 250 30～69 - From: 10,004,960 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Bore (rough machining short blade type), WBMR2000 Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Low resistance, sharp wave-shaped edge and high rake angle.・ Insert size with high cutting edge strength and cost-effective M class insert.・ A strong anti-rotation mechanism suppresses the insert movement during cutting.・ For large diameter sizes (ø40, ø50), the insert shape with the integrated main and auxiliary cutting edges is adopted to facilitate tool management.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Groove 20 ～ 50 Cast Iron Rough and medium rough processing 140 ～ 350 - With handle 25 ～ 50.8 60 ～ 250 20～47 - From: 6,866,693 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WEX2000E/EL Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 14 ～ 63 Cast Iron Rough and medium rough processing 80 ～ 180 1 ～ 8 With handle 16 ～ 32 25 ～ 60 10 - From: 4,343,371 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Repeater, WRX2000E Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Realizes low resistance and low vibration machining by optimizing the cutting edge placement.・ The lead groove and special pocket shape achieves both smooth cutting chip discharge and high body rigidity.・ With a bottom blade support surface, bottom blade loss is reduced and high-reliability is achieved.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 20 ～ 40 Cast Iron Rough and medium rough processing 120 ～ 160 4 ～ 16 With handle 20 ～ 42 40 ～ 50 18～36 - From: 10,195,975 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Repeater, WRX2000R Type
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 40 ～ 50 Cast Iron Rough and medium rough processing - 10 ～ 16 Arbor - - 18～36 - From: 18,465,673 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Side / Groove 80 ～ 200 Cast Iron Rough and medium rough processing - 4 ～ 10 Arbor - - 16 - From: 14,099,482 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·Suitable for side milling and grooving of copper / cast iron / stainless steel.Maximum cutting depth (Ad) (mm): 18
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Side / Groove 80 ～ 200 Cast Iron Rough and medium rough processing - 5 ～ 12 Arbor - - 18 - From: 14,948,523 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general cutting of steel and cast iron (slab milling and grooving).Finish category: coarse / medium coarse millingMaximum cutting depth (Ad) (mm): 6.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 80 ～ 200 Cast Iron Rough and medium rough processing - 6 ～ 16 Arbor - - 6.5 - From: 8,876,577 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.Maximum cutting depth (Ad) (mm): 9.5cutting diameter D (⌀): 6, 8, 10, 12
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 80 ～ 157 Cast Iron Rough and medium rough processing - 6 ～ 12 Arbor - - 9.5 - From: 15,502,092 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·A multi mill with a handle for cutting general-purpose and difficult-to-cut materials (slab milling / grooving / chamfering).Overall length (L) (mm): 120Shank diameter (d) (mm): 32Maximum cutting depth (Ad) (mm): 6.5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 50 ～ 80 Cast Iron Rough and medium rough processing 120 3 ～ 4 With handle 32 40 6.5 - From: 9,899,125 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·A light mill with a handle for side milling and grooving of steel, cast iron, and stainless steel.Maximum cutting depth (Ad) (mm): 8 to 19
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Side / Groove 16 ～ 60 Cast Iron Rough and medium rough processing 70 ～ 160 1 ～ 3 With handle 16 ～ 32 - 8~19 - From: 2,774,336 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill Head WEX2000M Type
SUMITOMO ELECTRIC HARDMETAL
Supports various combinations of carbide arbors and steel arbors. Screw mount type enables easy replacement.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Side / Groove 16 ～ 40 Cast Iron Rough and medium rough processing 42 ～ 63 2 ～ 6 Centering Plug 8.5 ～ 17 25 ～ 40 10 - From: 5,403,690 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Radius Mill WRCX Type WRCX08000E
SUMITOMO ELECTRIC HARDMETAL
Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 20 ～ 25 Cast Iron Rough and medium rough processing 130 ～ 180 2 ～ 3 With handle 20 ～ 25 50 ～ 100 4 - From: 5,658,048 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Radius Mill WRCX Type WRCX10000E
SUMITOMO ELECTRIC HARDMETAL
Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 25 ～ 32 Cast Iron Rough and medium rough processing 130 ～ 200 2 ～ 3 With handle 25 ～ 32 50 ～ 120 5 - From: 5,954,898 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Wave Radius Mill WRCX Type
SUMITOMO ELECTRIC HARDMETAL
Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 20 ～ 32 Cast Iron Rough and medium rough processing 49 ～ 63 2 ～ 3 Centering Plug 10.5 ～ 17 30 ～ 40 4 ～ 5 - From: 5,658,048 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Metal Slash Mill MSX06000E Type
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 16 ～ 25 Cast Iron Rough and medium rough processing 110 ～ 250 2 ～ 3 With handle 16 ～ 25 20 ～ 120 1 - From: 6,315,485 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Metal Slash Mill MSX08000E Type
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 20 ～ 35 Cast Iron Rough and medium rough processing 130 ～ 250 2 ～ 3 With handle 20 ～ 32 30 ～ 120 1.5 - From: 7,375,607 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Metal Slash Mill (Modular Type) MSX06000M Type
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 16 ～ 25 Cast Iron Rough and medium rough processing 42 ～ 56 2 ～ 3 Centering Plug - 25 ～ 35 1 - From: 6,315,485 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Metal Slash Mill MSX08000R Type
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove 40 Cast Iron Rough and medium rough processing - 4 Arbor - - 1.5 - From: 11,044,033 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-DNHS 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining
SUMITOMO ELECTRIC HARDMETAL
[Features]·A cutter with a handle for high efficiency machining of cast iron and cast steel (general steel, carbon steel, steel alloy).Maximum cutting depth (Ad) (mm): 5
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 160 Cast Iron Rough and medium rough processing - 6 ～ 12 Arbor - - 5 - From: 18,492,033 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining
SUMITOMO ELECTRIC HARDMETAL
[Features]·A high efficiency cutter for flat surface machining of cast iron and cast steel (general steel, carbon steel, steel alloy).Maximum cutting depth (Ad) (mm): 3cutting diameter D (⌀): 80, 100, 125, 160
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane 80 ～ 160 Cast Iron Rough and medium rough processing - 6 ～ 10 Arbor - - 3 - From: 13,213,654 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Sumi UFO Mill, UFO Model UFO-R
SUMITOMO ELECTRIC HARDMETAL
[Features]Finish category: coarse / medium coarse millingRake angle: radial/-7°, axial/27°
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 80 ～ 250 Cast Iron Rough and medium rough processing - 4 ～ 12 Arbor - - 5.5 ～ 7.5 - From: 12,475,365 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Ace Mill, APG Model APG-R
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general purposes, slab milling, grooving, and chamfering of non-ferrous metals.Maximum cutting depth (Ad) (mm): 7
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 80 ～ 315 Cast Iron Rough and medium rough processing - 5 ～ 16 Arbor - - 7 - From: 14,376,266 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Used for SEC-Ace Mill, EHG Model EHG-R
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5cutting diameter D (⌀): 80, 100, 125, 160, 200
Machining Application blade diameter D(φ) work material Finish category Overall length (L)(mm) Number of flutes(sheet) Mounting Method Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Maximum Cutting Depth (Ad)(mm) Compatible Tip Material Plane / Groove / Chamfer 80 ～ 200 Cast Iron Rough and medium rough processing - 4 ～ 10 Arbor - - 5.5 - From: 10,722,003 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Machining Application |
| blade diameter D(φ) |
| work material |
| Finish category |
| Overall length (L)(mm) |
| Number of flutes(sheet) |
| Mounting Method |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Maximum Cutting Depth (Ad)(mm) |
| Compatible Tip Material |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product SeriesDòng sản phẩm | SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH | SEC-Wave Bore (rough machining long blade type), WBMR2000L Type | SEC-Wave Bore (rough machining short blade type), WBMR2000 Type | SEC-DNHS 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining | SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining | ||||||||||||||||||||||||||||||||||||||||
| From | 13,673,387 VND- | 5,573,262 VND- | 8,117,830 VND- | 5,870,112 VND- | 9,135,657 VND- | 2,754,596 VND- | 13,213,654 VND- | 5,340,149 VND- | 9,983,912 VND- | 6,230,699 VND- | 25,223,580 VND- | 12,273,924 VND- | 11,903,304 VND- | 15,428,323 VND- | 7,439,344 VND- | 11,574,193 VND- | 6,485,057 VND- | 9,156,902 VND- | 16,832,900 VND- | 39,034,082 VND- | 3,346,790 VND- | 10,004,960 VND- | 6,866,693 VND- | 4,343,371 VND- | 10,195,975 VND- | 18,465,673 VND- | 14,099,482 VND- | 14,948,523 VND- | 8,876,577 VND- | 15,502,092 VND- | 9,899,125 VND- | 2,774,336 VND- | 5,403,690 VND- | 5,658,048 VND- | 5,954,898 VND- | 5,658,048 VND- | 6,315,485 VND- | 7,375,607 VND- | 6,315,485 VND- | 11,044,033 VND | 18,492,033 VND- | 13,213,654 VND- | 12,475,365 VND- | 14,376,266 VND- | 10,722,003 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Machining Application | Plane / Groove / Chamfer | Plane / Side / Groove / Vertical | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Side / Groove | Side / Groove | Plane | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Side / Groove / Vertical | Plane | Plane / Side / Groove | Plane / Groove / Chamfer | Plane | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane | Plane | Groove | Groove | Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Side / Groove | Side / Groove | Plane / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Side / Groove | Plane / Side / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane | Plane | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer |
| blade diameter D(φ) | 50 ～ 80 | 20 ～ 30 | 40 ～ 63 | 32 ～ 63 | 40 ～ 80 | 16 ～ 80 | 80 ～ 160 | 25 ～ 63 | 50 ～ 250 | 20 ～ 30 | 80 ～ 160 | 40 ～ 63 | 80 ～ 200 | 80 ～ 160 | 50 ～ 250 | 80 ～ 125 | 32 ～ 40 | 32 ～ 40 | 37 ～ 60 | 80 ～ 200 | 10 ～ 30 | 20 ～ 50 | 20 ～ 50 | 14 ～ 63 | 20 ～ 40 | 40 ～ 50 | 80 ～ 200 | 80 ～ 200 | 80 ～ 200 | 80 ～ 157 | 50 ～ 80 | 16 ～ 60 | 16 ～ 40 | 20 ～ 25 | 25 ～ 32 | 20 ～ 32 | 16 ～ 25 | 20 ～ 35 | 16 ～ 25 | 40 | 80 ～ 160 | 80 ～ 160 | 80 ～ 250 | 80 ～ 315 | 80 ～ 200 |
| work material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Finish category | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing |
| Overall length (L)(mm) | 120 | 130 ～ 150 | - | - | 120 | 100 ～ 160 | - | 120 ～ 220 | - | 185 ～ 230 | - | - | - | - | - | - | 150 ～ 160 | 230 ～ 240 | - | - | 100 ～ 350 | 140 ～ 350 | 140 ～ 350 | 80 ～ 180 | 120 ～ 160 | - | - | - | - | - | 120 | 70 ～ 160 | 42 ～ 63 | 130 ～ 180 | 130 ～ 200 | 49 ～ 63 | 110 ～ 250 | 130 ～ 250 | 42 ～ 56 | - | - | - | - | - | - |
| Number of flutes(sheet) | 4 ～ 6 | 3 ～ 5 | 4 ～ 6 | 3 ～ 6 | 3 ～ 4 | 1 ～ 4 | 6 ～ 10 | 2 ～ 6 | 5 ～ 24 | 3 ～ 5 | 6 ～ 12 | - | 4 ～ 10 | 8 ～ 12 | 3 ～ 12 | 4 ～ 6 | 4 | 4 | 2 ～ 4 | 6 ～ 16 | - | - | - | 1 ～ 8 | 4 ～ 16 | 10 ～ 16 | 4 ～ 10 | 5 ～ 12 | 6 ～ 16 | 6 ～ 12 | 3 ～ 4 | 1 ～ 3 | 2 ～ 6 | 2 ～ 3 | 2 ～ 3 | 2 ～ 3 | 2 ～ 3 | 2 ～ 3 | 2 ～ 3 | 4 | 6 ～ 12 | 6 ～ 10 | 4 ～ 12 | 5 ～ 16 | 4 ～ 10 |
| Mounting Method | With handle | With handle | Arbor | Arbor | With handle | With handle | Arbor | With handle | Arbor | With handle | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | With handle | With handle | Arbor | Arbor | With handle | With handle | With handle | With handle | With handle | Arbor | Arbor | Arbor | Arbor | Arbor | With handle | With handle | Centering Plug | With handle | With handle | Centering Plug | With handle | With handle | Centering Plug | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor |
| Shank diameter (d)(mm) | 32 | 20 ～ 25 | - | - | 32 | 16 ～ 32 | - | 20 ～ 42 | - | 20 ～ 25 | - | - | - | - | - | - | 32 | 32 | - | - | 16 ～ 32 | 25 ～ 50.8 | 25 ～ 50.8 | 16 ～ 32 | 20 ～ 42 | - | - | - | - | - | 32 | 16 ～ 32 | 8.5 ～ 17 | 20 ～ 25 | 25 ～ 32 | 10.5 ～ 17 | 16 ～ 25 | 20 ～ 32 | - | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | 40 | 35 ～ 50 | - | - | 30 | 25 ～ 45 | - | 25 ～ 80 | - | 35 ～ 75 | - | - | - | - | - | - | 50 ～ 55 | 50 ～ 90 | - | - | 30 ～ 120 | 60 ～ 250 | 60 ～ 250 | 25 ～ 60 | 40 ～ 50 | - | - | - | - | - | 40 | - | 25 ～ 40 | 50 ～ 100 | 50 ～ 120 | 30 ～ 40 | 20 ～ 120 | 30 ～ 120 | 25 ～ 35 | - | - | - | - | - | - |
| Maximum Cutting Depth (Ad)(mm) | 5.5 | 17～35 | 14 | 4 ～ 6 | 10 | 8 ～ 16 | 8 | 14 | 6 | 17 ～ 35 | 0.5 | 10 | 9.5 | 8 | 10 | 14 | 39 | 39 | 0.5 | 0.5 | 0.1~0.4 | 30～69 | 20～47 | 10 | 18～36 | 18～36 | 16 | 18 | 6.5 | 9.5 | 6.5 | 8~19 | 10 | 4 | 5 | 4 ～ 5 | 1 | 1.5 | 1 | 1.5 | 5 | 3 | 5.5 ～ 7.5 | 7 | 5.5 |
| Compatible Tip Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Machining Application
-
Plane
-
Side
-
Groove
-
Plunging (Z feed)
-
Inclined Cuts
-
Chamfer
-
Vertical
-
Plane
-
blade diameter D(φ)
- 6
- 8
- 9
- 10
- 10 mm
- 11
- 12
- 12 mm
- 12.5
- 13.2
- 13.4
- 14
- 15
- 15 mm
- 15.4
- 16
- 16 mm
- 16.2
- 17
- 17.5
- 18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 20
- 20 mm
- 20.2
- 21
- 22
- 23
- 23.2
- 23.4
- 23.8
- 24
- 24 mm
- 25
- 25 mm
- 25 mm
- 26
- 28
- 28.2
- 30
- 30 mm
- 30/32
- 30.7
- 31
- 32
- 32 mm
- 33
- 33.4
- 34
- 35
- 35.9
- 36
- 36.0 mm
- 36 mm
- 37
- 38
- 38.2
- 39
- 40
- 40 mm
- 40mm
- 40(42.9)
- 42
- 42.0 mm
- 42mm
- 43
- 44
- 44 mm
- 44mm
- 44.5 mm
- 45
- 46.4
- 47
- 48.7
- 50
- 50 mm
- 50mm
- 50 mm
- 50.0 mm
- 50 (52.9)
- 51
- 51.2
- 52
- 52.0 mm
- 52mm
- 52 mm
- 52.5 mm
- 54
- 54 mm
- 54mm
- 54.08mm
- 55
- 60
- 61.7
- 62.5 mm
- 62.5mm
- 63
- 63 mm
- 63mm
- 63 mm
- 63.0 mm
- 63 (65.9)
- 63.4
- 63.5
- 64
- 64.08mm
- 65
- 66
- 66 mm
- 66.0 mm
- 66mm
- 66 mm
- 68
- 69.7mm
- 70
- 75
- 75.5 mm
- 75.5mm
- 76.2
- 77.08mm
- 77.08 mm
- 78.7
- 80
- 80 mm
- 80mm
- 80 mm
- 80.0 mm
- 80 (82.9)
- 83.4
- 84
- 84 mm
- 84.0 mm
- 84mm
- 86.7mm
- 88
- 89.4
- 90
- 92.5mm
- 94.08mm
- 94.08 mm
- 98.7
- 98.8mm
- 100
- 100 mm
- 100mm
- 100 mm
- 100.0 mm
- 100 (102.9)
- 101.3mm
- 101.6
- 105
- 106.7mm
- 109
- 110
- 112.5mm
- 114.08mm
- 114.08 mm
- 118.8mm
- 123.7
- 125
- 125 mm
- 125mm
- 125 mm
- 125 (127.9)
- 127
- 130
- 131.4mm
- 131.7mm
- 137.5mm
- 138.8mm
- 139.08mm
- 139.08 mm
- 140
- 150
- 152.4
- 157
- 160
- 160 mm
- 160mm
- 160 mm
- 160 (162.9)
- 166.7mm
- 172.5mm
- 174.08 mm
- 174.08mm
- 174.08 mm
- 200
- 200mm
- 200 (202.9)
- 212.5mm
- 250
- 250mm
- 250 (252.9)
- 268.8mm
- 315
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
26～27
- 26
- 27
-
32～38
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 42
- 43
- 45
- 48
- 49
-
50～57
- 50
- 50$50.7
- 55
- 56
- 57
-
60～63$63.7
- 60
- 62
- 63
- 63$63.7
-
70～79
- 70
- 73
- 74
- 75
- 77.7
- 78
- 79
-
80～88
- 80
- 83
- 84
- 84.7
- 85
- 88
-
90～98.7
- 90
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 108
- 109
-
110～117
- 110
- 112
- 115
- 117
-
120～128
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～145
- 140
- 141
- 143
- 144
- 145
-
150～158
- 150
- 155
- 158
-
160～166
- 160
- 165
- 166
-
170～176
- 170
- 171
- 172
- 173
- 175
- 176
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 191
-
200
-
210～215
- 210
- 215
-
220
-
230
-
240
-
250～256
- 250
- 256
-
260～266.8
- 260
- 266.8
-
270
-
280
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Number of flutes(sheet)
-
Mounting Method
-
With handle
-
Arbor
-
Centering Plug
- Shell Type
-
With handle
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Maximum Cutting Depth (Ad)(mm)
-
Compatible Tip Material
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy