(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
SANKO MFG Square End Mills (HSS)（Torsion Angle (θ)：Standard torsion (30-40°)）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
22 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 60 2 ～ 85 6 ～ 42 2 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 376,717 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more 
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2T S Coating S-TEC 2-Flute Short Flute
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 20 ～ 250 6 ～ 42 2 60 ～ 345 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 493,471 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 10 ～ 85 6 ～ 42 4 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KHB4TS Hybrid Short 4-Flute Blade
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 15 ～ 55 8 ～ 25 4 60 ～ 135 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 838,222 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS4T S Coating STEC 4-Flute Short
SANKO MFG
[Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 911,006 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 20 ～ 300 6 ～ 42 4 60 ～ 395 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 526,028 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KHB2TS Hybrid Short 2-Flute Blade
SANKO MFG
A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.[Features]· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 10 ～ 55 8 ～ 25 2 60 ～ 135 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 763,862 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS2T, P Coating 2-Flute Short Flute
SANKO MFG
[Features]· P coating provides excellent surface flatness and abrasion resistance.· A 2-flute end mill for finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 8 ～ 55 6 ～ 25 2 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 526,028 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2TM S Coating Estech 2-Flute Regular Blade
SANKO MFG
[Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of machining applications, due to the regular flute length.· High grade powder metallurgy HSS with S-coating.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 10 ～ 55 6 ～ 20 2 60 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2TL S Coated Estech 2-Flute Long
SANKO MFG
[Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 2 55 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 847,861 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2T ESTECH 2-Flute Short Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 712,596 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TM ESTECH 2-Flute Regular Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 10 ～ 55 6 ～ 20 2 60 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 679,469 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TL ESTECH 2-Flute Long Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 15 ～ 105 6 ～ 25 2 55 ～ 185 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 826,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 14 10 ～ 35 6 ～ 12 2 50 ～ 90 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 444,678 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS3T P Coated 3-Flute Short Blade
SANKO MFG
[Features]· A 3-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 10 ～ 55 6 ～ 25 3 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 575,011 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS4T, P Coating 4-Flute Short Flute
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 10 ～ 55 6 ～ 25 4 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 575,011 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS4TL S Coating S TECH 4-Flute Long Flute
SANKO MFG
[Features]· 4-flute finishing endmill with TiCN coating.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 4 55 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 947,098 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4T ESTECH 4-Flute Short Blade
SANKO MFG
[Features]· Uses high grade powder metallurgy HSS.· Ideal for finish machining.· A 4-flute end mill for finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 652,322 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4TL S TECH 4-Flute Long Flute
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 4 55 ～ 190 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 904,123 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AL1T 1-Flute for Aluminum Frame
SANKO MFG
An end mill dedicated to aluminum sash processing.Tool Material: Cobalt High-Speed Steel, Work Material: AluminumCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pc.): 1Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 12 18 ～ 45 8 ～ 12 1 80 ～ 100 Aluminum[◎] Groove Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS 28 ～ 66 - From: 706,636 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Product SeriesDòng sản phẩm | ||||||||||||||||||||||
| From | 376,717 VND- | 697,174 VND- | 493,471 VND- | 412,127 VND- | 838,222 VND- | 911,006 VND- | 526,028 VND- | 763,862 VND- | 526,028 VND- | 697,174 VND- | 847,861 VND- | 712,596 VND- | 679,469 VND- | 826,418 VND- | 444,678 VND- | 575,011 VND- | 575,011 VND- | 947,098 VND- | 652,322 VND- | 904,123 VND- | 412,127 VND- | 706,636 VND- |
| Days to ShipSố ngày giao hàng | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Blade diameter (D)(φ) | 1 ～ 60 | 1 ～ 40 | 3 ～ 50 | 3 ～ 60 | 5 ～ 30 | 3 ～ 40 | 3 ～ 60 | 5 ～ 30 | 3 ～ 30 | 3 ～ 20 | 3 ～ 40 | 1 ～ 40 | 3 ～ 20 | 3 ～ 30 | 3 ～ 14 | 3 ～ 30 | 3 ～ 30 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 6 ～ 12 |
| Blade length (ℓ)(mm) | 2 ～ 85 | 2 ～ 65 | 20 ～ 250 | 10 ～ 85 | 15 ～ 55 | 10 ～ 65 | 20 ～ 300 | 10 ～ 55 | 8 ～ 55 | 10 ～ 55 | 15 ～ 105 | 2 ～ 65 | 10 ～ 55 | 15 ～ 105 | 10 ～ 35 | 10 ～ 55 | 10 ～ 55 | 15 ～ 105 | 10 ～ 65 | 15 ～ 105 | 10 ～ 65 | 18 ～ 45 |
| Shank diameter (d)(mm) | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 8 ～ 25 | 6 ～ 32 | 6 ～ 42 | 8 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 12 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 8 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 4 | 1 |
| Overall Length (L)(mm) | 50 ～ 185 | 50 ～ 150 | 60 ～ 345 | 50 ～ 185 | 60 ～ 135 | 50 ～ 150 | 60 ～ 395 | 60 ～ 135 | 50 ～ 135 | 60 ～ 130 | 55 ～ 190 | 50 ～ 150 | 60 ～ 130 | 55 ～ 185 | 50 ～ 90 | 50 ～ 135 | 50 ～ 135 | 55 ～ 190 | 50 ～ 150 | 55 ～ 190 | 50 ～ 150 | 80 ～ 100 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Groove |
| Coating | Non-Coated | TiCN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | TiCN | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 28 ～ 66 |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy