(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
SANKO MFG Square HSS End Mills（Tool Material Type：Powder high-speed steel）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
17 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 40 10 ～ 65 6 ～ 32 4 ～ 6 70 ～ 185 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,203,727 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2T S Coating S-TEC 2-Flute Short Flute
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSM S Coated Estech Muscle 3-Flute Regular
SANKO MFG
[Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 15 ～ 55 8 ～ 32 3 65 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Powerful Torsion (45°-60°) Available Powder high-speed steel 17 ～ 65 - From: 1,013,800 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS4T S Coating STEC 4-Flute Short
SANKO MFG
[Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 911,006 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSML S Coated Estech Muscle 3-Flute Long
SANKO MFG
[Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· A wide range of machining is possible, from heavy duty cutting to finishing machining.· Enables deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 25 ～ 105 8 ～ 32 3 75 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Powerful Torsion (45°-60°) Available Powder high-speed steel 27 ～ 115 - From: 1,205,036 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HiVA Powder High-Speed Steel High-Helix
SANKO MFG
[Features]· Powder HSS is adopted.· A high helical type end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 8 ～ 65 6 ～ 32 2 ～ 4 60 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Powerful Torsion (45°-60°) Available Powder high-speed steel 10 ～ 65 - From: 627,338 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2TM S Coating Estech 2-Flute Regular Blade
SANKO MFG
[Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of machining applications, due to the regular flute length.· High grade powder metallurgy HSS with S-coating.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 10 ～ 55 6 ～ 20 2 60 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2TL S Coated Estech 2-Flute Long
SANKO MFG
[Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 2 55 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 847,861 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2T ESTECH 2-Flute Short Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 712,596 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TM ESTECH 2-Flute Regular Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 10 ～ 55 6 ～ 20 2 60 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 679,469 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TL ESTECH 2-Flute Long Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 15 ～ 105 6 ～ 25 2 55 ～ 185 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 826,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS4TL S Coating S TECH 4-Flute Long Flute
SANKO MFG
[Features]· 4-flute finishing endmill with TiCN coating.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 4 55 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 947,098 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4T ESTECH 4-Flute Short Blade
SANKO MFG
[Features]· Uses high grade powder metallurgy HSS.· Ideal for finish machining.· A 4-flute end mill for finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 652,322 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4TL S TECH 4-Flute Long Flute
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 4 55 ～ 190 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 904,123 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSαM S Coating Estech α Nick Regular Flute
SANKO MFG
[Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 15 ～ 120 6 ～ 42 4 ～ 6 80 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,625,760 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSα L S Coated Estech α Nick Long Blade
SANKO MFG
[Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 30 ～ 150 6 ～ 42 4 ～ 6 80 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,833,730 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSαLS S Coated Estech α Nick Long Shank
SANKO MFG
Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 16 ～ 50 40 ～ 75 16 ～ 42 4 ～ 6 180 ～ 320 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 2,871,712 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Product SeriesDòng sản phẩm | |||||||||||||||||
| From | 1,203,727 VND- | 697,174 VND- | 1,013,800 VND- | 911,006 VND- | 1,205,036 VND- | 627,338 VND- | 697,174 VND- | 847,861 VND- | 712,596 VND- | 679,469 VND- | 826,418 VND- | 947,098 VND- | 652,322 VND- | 904,123 VND- | 1,625,760 VND- | 1,833,730 VND- | 2,871,712 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Blade diameter (D)(φ) | 5 ～ 40 | 1 ～ 40 | 6 ～ 30 | 3 ～ 40 | 6 ～ 30 | 3 ～ 40 | 3 ～ 20 | 3 ～ 40 | 1 ～ 40 | 3 ～ 20 | 3 ～ 30 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 5 ～ 50 | 6 ～ 50 | 16 ～ 50 |
| Blade length (ℓ)(mm) | 10 ～ 65 | 2 ～ 65 | 15 ～ 55 | 10 ～ 65 | 25 ～ 105 | 8 ～ 65 | 10 ～ 55 | 15 ～ 105 | 2 ～ 65 | 10 ～ 55 | 15 ～ 105 | 15 ～ 105 | 10 ～ 65 | 15 ～ 105 | 15 ～ 120 | 30 ～ 150 | 40 ～ 75 |
| Shank diameter (d)(mm) | 6 ～ 32 | 6 ～ 32 | 8 ～ 32 | 6 ～ 32 | 8 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 16 ～ 42 |
| Number of flutes(sheet) | 4 ～ 6 | 2 | 3 | 4 | 3 | 2 ～ 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 |
| Overall Length (L)(mm) | 70 ～ 185 | 50 ～ 150 | 65 ～ 150 | 50 ～ 150 | 75 ～ 190 | 60 ～ 150 | 60 ～ 130 | 55 ～ 190 | 50 ～ 150 | 60 ～ 130 | 55 ～ 185 | 55 ～ 190 | 50 ～ 150 | 55 ～ 190 | 80 ～ 220 | 80 ～ 250 | 180 ～ 320 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts |
| Coating | TiCN | TiCN | TiCN | TiCN | TiCN | Non-Coated | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | TiCN | TiCN | TiCN |
| Blade shape type | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| Underneck length (ℓ1)(mm) | - | - | 17 ～ 65 | - | 27 ～ 115 | 10 ～ 65 | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy