SANDVIK Holding Tools for O.D. Tuning（Applicable Tip Shape：C (80° Diamond-Shape)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 7,315,865 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2

  SANDVIK

  Highly productive external turning of large to medium-sized partsstable and secure clamping

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	25 ～ 32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Negative Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,405,139 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroPlex TT Multi-Function Turning Tool, C-TB-CN

  SANDVIK

  Equipped with 2 turning inserts in the same tool, greatly reducing tool change timeSpace-saving tool pot in tool magazine

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Profiling / Chamfer	-	0	-

  From: 39,085,298 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12

  SANDVIK

  Tool that combines external turning and internal turning boring with two inserts in the same toolGood chip control and long tool life

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	-	-	-

  From: 28,909,040 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 16,745,498 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 24,557,575 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Chamfer	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	32	25 ～ 32

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L

  SANDVIK

  Outer Dia Turning, Negative[Application]Outer Diameter[Specification]Applicable Tip Shape: C (80° Diamond-Shape)Clamp Shape: Cable clampSelfishly: Left-handApplicable Tip Clearance Angle Type: NegativeShank height(mm): 32Shank width(mm): 32Lead Angle(°): 15Cutting Angle(°): 75Clearance angle(°): 0Function Width(mm): 27Function Height(mm): 32Shank width(B): 32mmShank height(H): 32mm[Material]Steel

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L

  SANDVIK

  Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DCLNR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	25 ～ 32	25

  From: 2,777,823 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SCLCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, CoroTurn 107, QS Shank Tool Bit, Threading, QS-SCLCR/L..HP

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	Clamp-on	10 ～ 16	12 ～ 16

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 12	10 ～ 12

  From: 3,151,713 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR-E09

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR1212E

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	Clamp-on	12	12

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR/L

  SANDVIK

  [Features]A highly rigid double clamp cutting head for lathe turningSupports the use of internal coolantHigh tool rigiditySupports the use of negative insertsSupports everything from roughing through to finishing

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL/M

  SANDVIK

  Equipped with 2 turning inserts in the same tool, greatly reducing tool change timeSpace-saving tool pot in tool magazine

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 26,083,032 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L	Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2	CORO-TURN RC, Shank Bit for Negative Tips	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	CoroPlex TT Multi-Function Turning Tool, C-TB-CN	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL	Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L	Sandvik CoroTurn 107, Screw Clamp, SCLCR/L	Sandvik, CoroTurn 107, QS Shank Tool Bit, Threading, QS-SCLCR/L..HP	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR-E09	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR1212E	Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L	Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL/M
From	7,315,865 VND-	5,519,688 VND-	3,405,139 VND-	3,447,280 VND	9,772,263 VND-	22,638,820 VND	12,668,141 VND-	39,085,298 VND	13,931,828 VND	9,772,263 VND-	9,772,263 VND-	28,909,040 VND-	16,745,498 VND-	24,557,575 VND	3,339,521 VND	3,339,521 VND	5,519,688 VND	5,519,688 VND-	14,107,208 VND-	16,197,281 VND	8,803,333 VND-	3,691,105 VND-	2,777,823 VND-	6,975,588 VND-	9,413,108 VND	3,151,713 VND-	4,307,846 VND	9,413,108 VND	6,975,588 VND-	8,453,730 VND-	26,083,032 VND-
Days to ShipSố ngày giao hàng	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)
Applicable Chip Clearance Angle	Negative	Negative	Negative	Negative	-	-	-	-	-	-	-	-	-	-	Pozidriv	Pozidriv	-	-	Negative	Negative	Negative	Negative	Negative	Pozidriv	-	-	-	-	Negative	Negative	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand
Application	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer
Clamp Shape	Pin Lock	Cable clamp	Cable clamp	Lever lock	Clamp-on	-	Lever lock	-	Clamp-on	Clamp-on	Cable clamp	-	-	Lever lock	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Pin Lock	Pin Lock	Pin Lock	Cable clamp	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Cable clamp
Shank height(mm)	-	25 ～ 32	20 ～ 32	20	-	-	-	0	-	-	-	-	-	-	8	8	32	32	-	-	-	20 ～ 32	25 ～ 32	-	10 ～ 16	10 ～ 12	12 ～ 16	12	-	-	-
Shank width(mm)	-	25	20 ～ 32	20	-	-	-	-	-	-	-	-	-	-	8	8	25	25 ～ 32	-	-	-	20 ～ 32	25	-	12 ～ 16	10 ～ 12	12 ～ 16	12	-	-	-

Loading...Tải…