SANDVIK Holding Tools for O.D. Tuning（Application：Profiling）

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Shank Bit for O.D.

  SANDVIK

  Outer diameter turning shank tool bit that realizes high productivity, high efficiency and high quality machining solutions

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Profiling	Wedge Lock	32	32

  From: 4,559,740 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Profiling	Cable clamp	25 ～ 32	25 ～ 32

  From: 3,896,686 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Profiling	Double Clamp	40	40

  From: 6,515,708 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  T-Max Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Right-hand	Profiling	Clamp-on	40	25

  From: 7,457,547 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Profiling	Clamp-on	32	36

  From: 7,494,355 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Profiling	Cable clamp	32	32

  From: 6,784,805 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Bit, Solid Boring Bit, Boring Bit Adapter

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 13,319,148 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for Turning Processing

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Profiling	Lever lock	-	-

  From: 14,010,565 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Profiling	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Profiling	-	-	-

  From: 13,147,830 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C3-MVJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Profiling	-	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDHNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Profiling	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DRSNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Profiling	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	-	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCL

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Left-hand	Profiling	-	-	-

  From: 10,821,561 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCR

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Profiling	-	-	-

  From: 10,956,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107, Shank Tool Bit for Positive Inserts

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	No-hand	Profiling	Clamp-on	16	12

  From: 3,151,713 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107 Cutting Unit For Turning, C-SRDCN

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	No-hand	Profiling	-	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	Lever lock	-	-

  From: 13,353,411 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 11,708,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroPlex TT Multi-Function Turning Tool, C-TB-CN

  SANDVIK

  Equipped with 2 turning inserts in the same tool, greatly reducing tool change timeSpace-saving tool pot in tool magazine

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Profiling	-	0	-

  From: 39,085,298 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped) / R (Circular)	-	Left-hand / No-hand	Profiling	Clamp-on	-	-

  From: 14,105,808 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Profiling	Cable clamp	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	-	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	Cable clamp	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Unit, T-Max M Top Clamp, MVJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand / Left-hand	Profiling	Double Clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12

  SANDVIK

  Tool that combines external turning and internal turning boring with two inserts in the same toolGood chip control and long tool life

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Profiling	-	-	-

  From: 28,909,040 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Profiling	Clamp-on	-	-

  From: 27,469,973 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	Lever lock	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit For Outer-Diameter Turning, PRGCR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Left-hand	Profiling	Lever lock	20	20

  From: 3,093,776 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDACR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Profiling	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Profiling	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,179,211 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Profiling	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Profiling	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Profiling	Clamp-on	32	25 ～ 32

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Profiling	Cable clamp	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Profiling	Clamp-on	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Profiling	Clamp-on	32	25

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Profiling	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Profiling	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	T-Max P Negative Shank Bit for O.D.	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L	Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L	T-Max Shank Bit	T-Max Shank Bit for Ceramic Tips	CORO-TURN RC, Shank Bit for Ceramic Tips	Shank Bit, Solid Boring Bit, Boring Bit Adapter	Tool Bit for Turning Processing	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	T-Max P Cutting Unit For Turning	T-Max P Cutting Unit For Turning, C3-MVJNR/L	T-Max P Cutting Unit For Turning, C-DDHNR/L	T-Max P Cutting Unit For Turning, C-DDJNR/L	T-Max P Cutting Unit For Turning, C-DRSNR/L	T-Max P Cutting Unit For Turning, C-PDJNR/L	T-Max P, Turning Cutting Unit, C8-PRSCL	T-Max P, Turning Cutting Unit, C8-PRSCR	Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP	Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP	CoroTurn 107, Shank Tool Bit for Positive Inserts	CoroTurn 107 Cutting Unit For Turning, C-SRDCN	CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP	CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X	CoroPlex TT Multi-Function Turning Tool, C-TB-CN	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL	Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2	Coromant Capto, Cutting Unit, T-Max M Top Clamp, MVJNR/L	Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12	Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP	Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP	Shank Tool Bit For Outer-Diameter Turning, PRGCR/L	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDACR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP
From	4,559,740 VND	7,915,072 VND-	8,453,730 VND-	3,896,686 VND-	6,515,708 VND	7,457,547 VND	7,494,355 VND	6,784,805 VND	13,319,148 VND-	14,010,565 VND	3,447,280 VND	13,147,830 VND	7,915,072 VND	9,413,108 VND	9,413,108 VND	9,413,108 VND	10,783,648 VND	10,821,561 VND	10,956,711 VND	14,107,208 VND-	19,726,421 VND-	3,151,713 VND	16,197,281 VND	13,353,411 VND-	11,708,366 VND-	39,085,298 VND	14,105,808 VND-	13,931,828 VND-	10,902,832 VND-	10,902,832 VND-	7,817,848 VND-	28,909,040 VND-	27,469,973 VND	22,638,820 VND	3,093,776 VND	3,339,521 VND	4,179,211 VND	3,339,521 VND	3,339,521 VND	5,451,962 VND-	5,519,688 VND	5,519,688 VND	5,451,962 VND-	12,668,141 VND-	12,668,141 VND-
Days to ShipSố ngày giao hàng	9 Day(s)	7 Day(s) or more	6 Day(s) or more	9 Day(s)	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s)	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	T (Triangle)	R (Circular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	Other	R (Circular)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	D (55° Diamond-Shape)	R (Circular)	R (Circular)	R (Circular)	V (35° Diamond-Shaped)	R (Circular)	R (Circular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	V (35° Diamond-Shaped) / R (Circular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	R (Circular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	D (55° Diamond-Shape)
Applicable Chip Clearance Angle	Negative	Pozidriv	Negative	Negative	Negative	Negative	-	-	-	-	Negative	-	-	-	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	-	-	-	-	Negative	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	Negative	Negative
Selfishly	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Left-hand / No-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling	Profiling
Clamp Shape	Wedge Lock	Clamp-on	Cable clamp	Cable clamp	Double Clamp	Clamp-on	Clamp-on	Cable clamp	Clamp-on	Lever lock	Lever lock	-	-	-	-	-	-	-	-	Clamp-on	Clamp-on	Clamp-on	-	Lever lock	Clamp-on	-	Clamp-on	Cable clamp	-	Cable clamp	Double Clamp	-	Clamp-on	Lever lock	Lever lock	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Clamp-on	Clamp-on	Pin Lock	Pin Lock
Shank height(mm)	32	-	-	25 ～ 32	40	40	32	32	-	-	20	-	-	-	-	-	-	-	-	-	-	16	-	-	-	0	-	-	-	-	-	-	-	-	20	8	12 ～ 16	8	-	32	-	-	32	-	-
Shank width(mm)	32	-	-	25 ～ 32	40	25	36	32	-	-	20	-	-	-	-	-	-	-	-	-	-	12	-	-	-	-	-	-	-	-	-	-	-	-	20	8	12 ～ 16	8	-	25 ～ 32	25	25	25	-	-

Loading...Tải…