(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
53 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R5/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 105 |
From: 538,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap SFT-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 943,133 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
G1 ~ Rp3/8 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 4P | Non-Coated | NA | 55 ~ 95 |
From: 445,000 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | TiN | Available | 55 ~ 95 |
From: 1,262,806 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 895,371 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Parallel Pipe Thread Tap_CPM-SPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, or tempered material with hardness of about 20 to 45 HRC
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
G1/8 | Parallel for Pipes | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 28 | Powder high-speed steel | Tap for pipes | For through hole / For blind hole | 4P | Non-Coated | NA | 55 |
From: 760,806 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Tapered Tap for American Piping General Use (NPTF) TPT
OSG
Used to machine female tapered pipe threads. Mainly used for connecting pipe-shaped objects
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
NPT1/4 ~ NPT1/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 18 ~ 27 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 62 |
From: 1,031,725 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Quenched and tempered steel (45 to 55 HRC)[◎] | 11 ~ 28 | Powder high-speed steel | Tap for pipes | For through hole / For blind hole | 3P | TiCN | Available | 59 ~ 109 |
From: 1,836,100 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Short Screw S-TPT
OSG
Used to machine female tapered pipe threads. Short screw type used for tapping of short thread section such as elbows and teeth
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 591,667 VND |
---|
Days to Ship: Số ngày giao hàng: 18 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Tap Long Shank General Application_LT-SPT
OSG
It is used to machine the parallel female threads of the tapered pipe threads and the parallel pipe threads.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
Rp1 ~ Rp3/8 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 4P | Non-Coated | NA | 120 ~ 150 |
From: 1,204,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Tapered Tap for American Piping Spiral Tap SFT-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
NPT1/4 ~ NPT1/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | 18 ~ 27 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 55 ~ 62 |
From: 1,125,083 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap TiN coated with Long Shank_TIN-LT-TPT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.[Specifications]・ Shape: Pipe tap・ Screw type: Taper for pipes・ Coating: TiN・ Work Material: Low carbon steel (C content less than 0.25%): suitable / medium carbon steel (C content 0.25 to 0.45%): most suitable / high carbon steel (C content over 0.45%): most suitable / steel alloy (SCM): most suitable / heat-treated steel (25 to 35 HRC): suitable / brass (Bs) "suitable / brass cast iron (BsC) "suitable / bronze (PB) "suitable / rolled aluminum (AL) "suitable / Aluminum alloy casting (AC, ADC) "/ Magnesium alloy casting (MC) "suitable / zinc alloy casting (ZDC) [○]
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
Rc1/2 ~ Rc3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 14 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 2.5P | TiN | Available | 100 ~ 150 |
From: 1,286,939 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap TiN coated_TIN-TPT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 2.5P | TiN | Available | 55 ~ 95 |
From: 935,836 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT
OSG
It exhibits excellent power for cutting hardened steels (steel alloy, die steel, tool steel, etc.) of 50 HRC to 60 HRC or more.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | High Hardness Steel (50-60 HRC)[◎] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 3P | TiCN | Available | 59 ~ 87 |
From: 6,456,913 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap V coated for Aluminum Alloy_V-AL-TPT
OSG
Best suited for machining female tapered pipe threads where female threads are prone to peeling.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | 11 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 2.5P | TiCN | Available | 55 ~ 95 |
From: 742,813 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX)_H-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/8 ~ R1/16 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 |
From: 605,306 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 11 ~ 28 | Powder high-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 906,226 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT
OSG
A point type is available for through holes and a spiral type is provided for blind holes according to the workpiece shape.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
G1/2 ~ G3/8 | Parallel for Pipes | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 3P | Non-Coated | NA | 55 ~ 80 |
From: 4,678,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Tap for American Piping General Use (NPS) SPT
OSG
It is used to machine the parallel female threads of the tapered pipe threads and the parallel pipe threads.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
NPS1/4 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 18 | High-speed steel | Tap for pipes | For through hole / For blind hole | 4P | Non-Coated | NA | 62 |
From: 1,020,171 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT
OSG
[Specifications]· Shape: Pipe tap· Screw type: pipe taper· Coating: Non-Coated· Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R7/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] | 11 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 772,088 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | TiN | Available | 55 ~ 95 |
From: 1,199,060 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 2.5P | TiN | Available | 55 ~ 95 |
From: 963,200 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank・with Interrupted Threads_EX-LT-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 120 ~ 150 |
From: 1,548,866 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 120 ~ 150 |
From: 1,615,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Tap for Pipes, For Stainless Steel Use EX-SUS-TPT
OSG
It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 11 ~ 28 | - | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 727,340 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT
OSG
This is a long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,240,895 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for blind holes with difficult-to-cut materials such as stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Stainless steel (SUS)[◎] | 11 ~ 28 | Vanadium High-Speed Steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 946,466 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 11 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 778,465 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT
OSG
This is a short thread long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,430,138 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap, Long Shank LT-SFT-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | 14 ~ 28 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,255,365 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | 14 ~ 28 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,303,463 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 55 ~ 95 |
From: 810,336 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use (Left-hand thread) TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/4 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 19 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 62 |
From: 1,773,333 VND |
---|
Days to Ship: Số ngày giao hàng: 21 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Long Shank LT-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | Carbide | Tap for pipes | - | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,204,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 1,443,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT
OSG
Used to machine female tapered pipe threads. Short screw type used for tapping of short thread section such as elbows and teeth
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/4 ~ R1/16 | Taper for Pipe | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | 19 ~ 28 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 62 |
From: 734,111 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 80 |
From: 5,146,135 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 100 ~ 150 |
From: 5,820,250 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT
OSG
It is suitable for tapping a large amount of ordinary cast iron, high-strength cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc. with a high-precision automatic machine.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/2 ~ R3/8 | Taper for Pipe | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | 14 ~ 28 | Carbide | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 55 ~ 80 |
From: 5,146,135 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 11 ~ 19 | Powder high-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 62 ~ 95 |
From: 1,369,978 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1 ~ R3/8 | Taper for Pipe | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | 11 ~ 28 | Powder high-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 120 ~ 150 |
From: 1,843,293 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Oversize Parallel Pipe Thread Tap_EX-SPT
OSG
Used to machine female threads of parallel pipe threads.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
PF1 ~ PF3/8 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 11 ~ 19 | Vanadium High-Speed Steel | Tap for pipes | For through hole / For blind hole | 4P | Non-Coated | NA | 62 ~ 95 |
From: 783,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Taper Tap for Pipes Spiral Tap SFT-SPT
OSG
A spiral shape type is available for the blind hole according to the workpiece shape.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
R1/4 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 19 | High-speed steel | Tap for pipes | - | 2.5P | Non-Coated | NA | 62 |
From: 726,288 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap, Long Shank LT-SFT-SPT
OSG
A point type is available for through holes and a spiral type is provided for blind holes according to the workpiece shape.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
PF1/4 | Parallel for Pipes | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 19 | High-speed steel | Tap for pipes | For blind hole | 2.5P | Non-Coated | NA | 150 |
From: 1,501,363 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes New Roll Tap NRT-SPT
OSG
[Features]A new forming tap with overall lengths of 65 mm and 80 mm.[Applications]It can be used for side mounting of pipe screws and machining of deep holes.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
PF3/8 | Parallel for Pipes | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[○] | 19 | High-speed steel | Tap for pipes | For through hole / For blind hole | 2.5P | Non-Coated | NA | 65 |
From: 1,714,606 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
Product SeriesDòng sản phẩm | Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT | Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT | Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT | Parallel Pipe Thread Tap Long Shank General Application_LT-SPT | Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT | Taper Pipe Thread Tap for General Application (with OX)_H-TPT | Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT | Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT | Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT | Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT | Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT | Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT | Taper Tap for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT | Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT | Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT | Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT | Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT | Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT | CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT | ||||||||||||||||||||||||||
From | 538,333 VND- | 943,133 VND- | 445,000 VND- | 1,262,806 VND- | 895,371 VND- | 760,806 VND | 1,031,725 VND- | 1,836,100 VND- | 591,667 VND- | 1,204,999 VND- | 1,125,083 VND- | 1,286,939 VND- | 935,836 VND- | 6,456,913 VND- | 742,813 VND- | 605,306 VND- | 906,226 VND- | 4,678,000 VND- | 1,020,171 VND | 772,088 VND- | 1,199,060 VND- | 963,200 VND- | 1,548,866 VND- | 1,615,800 VND- | 727,340 VND- | 1,240,895 VND- | 946,466 VND- | 778,465 VND- | 1,430,138 VND- | 1,255,365 VND- | 1,303,463 VND- | 810,336 VND- | 1,773,333 VND | 1,204,999 VND- | 1,443,333 VND- | 734,111 VND- | 5,146,135 VND- | 5,820,250 VND- | 5,146,135 VND- | 1,369,978 VND- | 1,843,293 VND- | 783,333 VND- | 726,288 VND | 1,501,363 VND | 1,714,606 VND |
Days to ShipSố ngày giao hàng | Same day or more | 4 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) | 17 Day(s) | Same day or more | 18 Day(s) or more | Quote | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 21 Day(s) | Quote | Quote | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) or more | 17 Day(s) | 17 Day(s) | 6 Day(s) or more |
Screw size (Nominal) | R1 ~ R5/8 | R1 ~ R3/8 | G1 ~ Rp3/8 | R1 ~ R3/8 | R1 ~ R3/8 | G1/8 | NPT1/4 ~ NPT1/8 | R1 ~ R3/8 | R1 ~ R3/8 | Rp1 ~ Rp3/8 | NPT1/4 ~ NPT1/8 | Rc1/2 ~ Rc3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1/8 ~ R1/16 | R1 ~ R3/8 | G1/2 ~ G3/8 | NPS1/4 | R1 ~ R7/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1/4 | R1 ~ R3/8 | R1 ~ R3/8 | R1/4 ~ R1/16 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | PF1 ~ PF3/8 | R1/4 | PF1/4 | PF3/8 |
Screw Types | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes |
work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[○] |
Pitch (P), Number of Threading(mm) | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 28 | 18 ~ 27 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 18 ~ 27 | 14 ~ 28 | 11 ~ 28 | 14 ~ 28 | 11 ~ 28 | 28 | 11 ~ 28 | 14 ~ 28 | 18 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 14 ~ 28 | 11 ~ 28 | 11 ~ 28 | 14 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 28 | 19 | 11 ~ 28 | 11 ~ 28 | 19 ~ 28 | 14 ~ 28 | 14 ~ 28 | 14 ~ 28 | 11 ~ 19 | 11 ~ 28 | 11 ~ 19 | 19 | 19 | 19 |
Tool Material Type | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Powder high-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | Carbide | High-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Carbide | Carbide | - | Carbide | Vanadium High-Speed Steel | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel |
Tap Type | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
Hole type | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole |
Chamfer threads (Lcf) | 2.5P | 2.5P | 4P | 2.5P | 2.5P | 4P | 2.5P | 3P | 2.5P | 4P | 2.5P | 2.5P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 3P | 4P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 4P | 2.5P | 2.5P | 2.5P |
Coating Type | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
Coating Y/N | NA | NA | NA | Available | NA | NA | NA | Available | NA | NA | NA | Available | Available | Available | Available | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Overall Length (L)(mm) | 55 ~ 105 | 55 ~ 95 | 55 ~ 95 | 55 ~ 95 | 55 ~ 95 | 55 | 55 ~ 62 | 59 ~ 109 | 55 ~ 95 | 120 ~ 150 | 55 ~ 62 | 100 ~ 150 | 55 ~ 95 | 59 ~ 87 | 55 ~ 95 | 55 | 55 ~ 95 | 55 ~ 80 | 62 | 55 ~ 95 | 55 ~ 95 | 55 ~ 95 | 120 ~ 150 | 120 ~ 150 | 55 ~ 95 | 100 ~ 150 | 55 ~ 95 | 55 ~ 95 | 100 ~ 150 | 100 ~ 150 | 100 ~ 150 | 55 ~ 95 | 62 | 100 ~ 150 | 100 ~ 150 | 55 ~ 62 | 55 ~ 80 | 100 ~ 150 | 55 ~ 80 | 62 ~ 95 | 120 ~ 150 | 62 ~ 95 | 62 | 150 | 65 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy