OSG Radius End Mills (Carbide)（work material：Aluminum）

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 26	2	40 ～ 110	Aluminum[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,631,002 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  The original ultra-smooth DLC coating enables not only high-speed machining of aluminum but also semi-dry machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	DLC	radius	Standard torsion (30-40°)	-

  From: 2,106,079 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 3	20 ～ 56	2	90 ～ 160	Aluminum[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 3,101,480 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Even when machining aluminum parts that require a large amount of cutting, the excellent cutting chip discharge created by the unique groove foam realizes large depth of cut and high feed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	3	50 ～ 105	Aluminum[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,587,723 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10 ～ 20	0.5 ～ 1	10 ～ 20	2	32 ～ 58	Aluminum[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For General Steels (AlCrN, etc.)	radius	No torsion	-

  From: 1,558,215 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	Aluminum[○]	6	1.5 ～ 5	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,797,033 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys

  OSG

  An end mill based on the concept of ultra-high speed machining of aluminum alloys. Ideal for high efficiency machining of large aluminum parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	1 ～ 3	14 ～ 27	2	90 ～ 110	Aluminum[◎]	12 ～ 25	40 ～ 56	Plane / Side / Curved surface / Groove / Plunging (Z feed)	DLC	radius	Weak torsion (15 to 25˚)	-

  From: 4,246,192 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills 3 Flutes for Aluminum Alloys

  OSG

  Strain generation is suppressed by the R of the shank side flange.Work Material Aluminum/CopperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/Ball radius (mm) 1Number of flutes (pcs.) 3

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  18 ～ 22	1	18 ～ 22	3	51 ～ 60	Aluminum[◎]	10 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: 4,619,172 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,668,182 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2 ～ 1	13 ～ 26	4	90 ～ 110	Aluminum[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,045,000 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	0.5 ～ 3	48 ～ 56	4	140 ～ 160	Aluminum[○]	16 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 11,813,010 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	60 ～ 125	Aluminum[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,491,666 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute short for Aluminum Alloy with Internal Coolant Supply

  OSG

  [Features]・ For roughing to finishing・ It maximizes the performance of high-power machines・ Ideal for high efficiency machining of large aluminum parts・ Ideal for aluminum alloy・ DLC coating・ Sharp edge with sharp edge (Thin film thickness of 1 μm)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  20 ～ 25	1 ～ 5	30 ～ 37.5	3	100	Aluminum[◎]	20 ～ 25	55	-	DLC	radius	Standard torsion (30-40°)	-

  From: 7,615,373 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	3 Flutes Short for Copper & Aluminum Alloys	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys	Carbide End Mills 3 Flutes for Aluminum Alloys	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	3-flute short for Aluminum Alloy with Internal Coolant Supply
From	1,631,002 VND-	2,106,079 VND-	3,101,480 VND-	1,587,723 VND-	1,558,215 VND-	1,797,033 VND-	4,246,192 VND-	4,619,172 VND-	1,668,182 VND-	4,045,000 VND-	11,813,010 VND-	2,491,666 VND-	7,615,373 VND-
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	15 Day(s) or more	6 Day(s) or more
Blade diameter (D)(φ)	1 ～ 12	3 ～ 20	6 ～ 20	3 ～ 20	10 ～ 20	0.5 ～ 2.5	12 ～ 25	18 ～ 22	3 ～ 20	6 ～ 12	16 ～ 20	3 ～ 20	20 ～ 25
R Size(mm)	0.1 ～ 3	0.5 ～ 3	0.5 ～ 3	0.2 ～ 3	0.5 ～ 1	0.1	1 ～ 3	1	0.5 ～ 3	0.2 ～ 1	0.5 ～ 3	0.2 ～ 3	1 ～ 5
Blade length (ℓ)(mm)	2.5 ～ 26	4.5 ～ 30	20 ～ 56	8 ～ 38	10 ～ 20	0.7 ～ 3.7	14 ～ 27	18 ～ 22	4.5 ～ 30	13 ～ 26	48 ～ 56	8 ～ 38	30 ～ 37.5
Number of flutes(sheet)	2	3	2	3	2	2	2	3	3	4	4	4	3
Overall Length (L)(mm)	40 ～ 110	50 ～ 125	90 ～ 160	50 ～ 105	32 ～ 58	50	90 ～ 110	51 ～ 60	50 ～ 125	90 ～ 110	140 ～ 160	60 ～ 125	100
work material	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]
Shank diameter (d)(mm)	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6	12 ～ 25	10 ～ 12	6 ～ 20	6 ～ 12	16 ～ 20	6 ～ 20	20 ～ 25
Underneck length (ℓ1)(mm)	-	-	-	-	-	1.5 ～ 5	40 ～ 56	-	-	-	-	-	55
Machining Application	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	-
Coating	TiAlN	DLC	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	DLC	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	DLC
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)
R Precision(μm)	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…