(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
OSG Ball End Mills (Carbide)（Coating：TiAlN）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
19 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 1.5 0.8 ～ 8 - 3 2 40 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,320,897 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.6 3 - 4 2 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 900,582 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-PC-EBT
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 2 ～ 12 20 ～ 85 6 ～ 16 3 70 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,013,153 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 1.5 ～ 30 - 6 ～ 20 3 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,107,382 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 6 12 ～ 22 - 5 ～ 11 2 120 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,783,385 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 2 0.16 ～ 3.2 1 ～ 30 6 2 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,798,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 15 2.5 ～ 55 - 4 ～ 25 2 50 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,561,288 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-EBD-6
OSG
High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 1.1 ～ 9 6 2 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,451,322 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute FX-LS-MG-EBD
OSG
The long shank allows machining in deep sections
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 15 2.5 ～ 55 - 3 ～ 25 2 70 ～ 280 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,430,076 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS
OSG
A ball end mill for heavy cutting that supports high speed and high efficiency (large cutting depth). The short overall length is a perfect fit for shrink and HSK.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 2.5 ～ 30 6 ～ 12 2 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.015～+0.015 ～ -0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,407,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXE-HS-EBD
OSG
Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 4 8 16 8 2 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.003～+0.003 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,185,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,549,214 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
A ball end mill for high hardness steel with a lubrication hole that maximizes the tool rigidity.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 6 ～ 20 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,716,032 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-PC-MG-EBD
OSG
Due to the highly rigid pencil neck, good cutting is possible even with a large tool runout.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 6 0.6 ～ 22 10 ～ 80 6 ～ 16 2 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,101,874 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Pencil-neck Type, 2-Flute FX-PCL-EBD
OSG
It is a ball end mill for deep cutting that cannot be reached with ordinary end mills.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 6 8 ～ 22 100 ～ 140 10 ～ 16 2 200 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 9,290,082 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 3-Flute FXS-LS-EBT
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 3 140 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,454,985 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-EBT
OSG
The ball shape is composed of 3 flutes to the center to enable high efficiency machining with a 50% increase in table feed.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 10 5 ～ 38 - 4 ～ 20 3 50 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,624,435 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 0.7 ～ 8.1 5 ～ 60 6 ～ 12 2 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] - Curved surface / Side / Engraving / R Groove TiAlN Spherical Ball From: 2,447,781 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 2.5 ～ 30 6 ～ 12 2 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,277,619 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | |||||||||||||||||||
| From | 2,320,897 VND- | 900,582 VND | 3,013,153 VND- | 3,107,382 VND- | 2,783,385 VND- | 2,798,335 VND- | 2,561,288 VND- | 2,451,322 VND- | 2,430,076 VND- | 2,407,650 VND- | 3,185,873 VND | 3,549,214 VND- | 3,716,032 VND- | 3,101,874 VND- | 9,290,082 VND- | 3,454,985 VND- | 2,624,435 VND- | 2,447,781 VND- | 2,277,619 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| R Size(mm) | 0.2 ～ 1.5 | 0.6 | 1 ～ 6 | 0.5 ～ 10 | 3 ～ 6 | 0.1 ～ 2 | 0.5 ～ 15 | 0.1 ～ 3 | 0.5 ～ 15 | 0.5 ～ 6 | 4 | 3 ～ 10 | 3 ～ 10 | 0.3 ～ 6 | 2 ～ 6 | 3 ～ 10 | 1 ～ 10 | 0.5 ～ 6 | 0.5 ～ 6 |
| Blade length (ℓ)(mm) | 0.8 ～ 8 | 3 | 2 ～ 12 | 1.5 ～ 30 | 12 ～ 22 | 0.16 ～ 3.2 | 2.5 ～ 55 | 0.2 ～ 6 | 2.5 ～ 55 | 1 ～ 12 | 8 | 12 ～ 38 | 6 ～ 20 | 0.6 ～ 22 | 8 ～ 22 | 12 ～ 38 | 5 ～ 38 | 0.7 ～ 8.1 | 1 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | 20 ～ 85 | - | - | 1 ～ 30 | - | 1.1 ～ 9 | - | 2.5 ～ 30 | 16 | - | - | 10 ～ 80 | 100 ～ 140 | - | - | 5 ～ 60 | 2.5 ～ 30 |
| Shank diameter (d)(mm) | 3 | 4 | 6 ～ 16 | 6 ～ 20 | 5 ～ 11 | 6 | 4 ～ 25 | 6 | 3 ～ 25 | 6 ～ 12 | 8 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 10 ～ 16 | 6 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 |
| Overall Length (L)(mm) | 40 | 50 | 70 ～ 160 | 60 ～ 200 | 120 ～ 160 | 50 ～ 100 | 50 ～ 180 | 50 | 70 ～ 280 | 50 ～ 80 | 60 | 90 ～ 160 | 90 ～ 160 | 60 ～ 160 | 200 ～ 250 | 140 ～ 250 | 50 ～ 160 | 60 ～ 110 | 50 ～ 80 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| R Precision(μm) | -0.01～+0.01 | -0.01～+0.01 | -0.015～+0.015 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 ～ -0.01 | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～0.01 | -0.01～0.01 | -0.015～+0.015 | -0.015～+0.015 | - | -0.01～+0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1.0
- 1.05
- 1.1
- R1.1
- 1.15
- 1.2
- R1.2
- 1.25
- R1.25
- 1.3
- R1.3
- 1.35
- 1.4
- R1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- R1.6
- 1.65
- 1.7
- R1.7
- 1.75
- R1.75
- 1.8
- R1.8
- 1.85
- 1.9
- R1.9
- 1.95
- 2
- R2
- R2.0
- 2.05
- 2.1
- R2.1
- 2.15
- 2.2
- R2.2
- 2.25
- R2.25
- 2.3
- R2.3
- 2.35
- R2.35
- 2.4
- R2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- R2.6
- 2.65
- 2.7
- R2.7
- 2.75
- R2.75
- 2.8
- R2.8
- 2.85
- 2.9
- R2.9
- 2.95
- 3
- R3
- R3.0
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- R5.0
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- R6.0
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- R6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7.0
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8.0
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10.0
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.95
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.08
- 0.1
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.38
- 0.4
- 0.45
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.7
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.26
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
63
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
- AlTiN
- BLUE
- TiSiN
- X-coating
- Y coating
- FX
- DIA
- A+
-
Type
- Ball
- Tapered neck ball
- Spherical Ball
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy