(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
15 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ This is an end mill that allows continuous grooving after drilling without pre-machining. The number of tools in the magazine can be reduced.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 4.5 ~ 18 | - | 6 ~ 12 | 3 | 50 ~ 75 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,342,414 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A high helix end mill that achieves both high cutting chip discharge and cutting edge rigidity. Highly efficient heavy cutting is possible not only for side cutting but also for groove cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 6 | 11 ~ 13 | - | 6 | 4 | 60 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,810,000 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A highly-stiff end mill with a developed WX super coat that is ultra-heat resistant and ultra-rigid. It enables high-speed and high-precision machining of hardened steel as well as high-speed machining of general steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 38 | - | 6 ~ 20 | 4 ~ 6 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
From: 966,666 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
WXS Coated Multiple Flutes Short Super_FXS-CR-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill for high-speed machining with extremely high tool rigidity. High-speed machining of hardened steel is also possible.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 30 | 5 ~ 55 | - | 6 ~ 32 | 4 ~ 8 | 60 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 2,097,424 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Stub (Super Hard)_WX-PHSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A high helix end mill short flute length type that achieves a high level of cutting chip discharge and cutting edge rigidity. Highly rigid short flute length enables high feed machining with large depth of cut.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2.5 ~ 20 | 3.8 ~ 30 | - | 6 ~ 20 | 4 | 60 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,617,034 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A long shank end mill with extremely high tool rigidity. A wide range of machining is possible from general materials to hardened steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 10 ~ 55 | - | 6 ~ 32 | 4 ~ 8 | 80 ~ 200 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 2,691,517 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Flute Medium Type WX-PHN [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A medium flute length type with a high helix end mill that achieves a high level of cutting chip discharge and cutting edge rigidity. Compatible with a wide range of work materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 5 | 10 ~ 17 | - | 6 | 4 | 60 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,713,427 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Long (Super Hard)_WX-PHL
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A long flute length type with a high helix end mill that achieves a high level of both cutting chip discharge and cutting edge rigidity.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 5 | 12 ~ 20 | - | 6 | 4 | 60 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,793,885 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Short_FX-MG-EHS
OSG
Excellent cutting chip discharge even with 4-flute groove cutting and excellent cutting performance to prevent burrs from occurring. A 3-flute type that is resistant to chatter vibration is also available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 | 8 | - | 6 | 3 | 50 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,882,212 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide High Helix End Mills Short_MG-EHS
OSG
[Notice] Alteration can be specified. Please select from "Standard / alteration classification" of the narrowing conditions.50° helix angle
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 13 ~ 45 | - | 6 ~ 25 | 3 ~ 4 | 50 ~ 120 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | With Lead | Square |
From: 2,257,750 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Long_FX-MG-EHL
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A long blade type that uses a sharp twist with good cutting performance. Uses unequal flutes to prevent chatter vibration.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 12 | 20 ~ 40 | - | 6 ~ 12 | 3 | 60 ~ 90 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | With Lead | Square |
From: 2,930,728 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
10 ~ 14 | 15 ~ 21 | - | 8 ~ 12 | 4 | 130 ~ 160 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 3,242,922 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WXS Coated Multiple Flutes Long Super_FXS-EML
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A long flute end mill with extremely high tool rigidity. A wide range of machining is possible from general materials to hardened steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 25 ~ 90 | - | 6 ~ 25 | 6 ~ 8 | 70 ~ 165 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side | TiAlN | With Lead | Square |
From: 4,750,777 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Router for CFRP (2-Flute / Herringbone Type)
OSG
[Features]· CFRP Router Series[Applications]· Work materials: Composite materials.[Material]· Cemented Carbide
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 12 | 18 ~ 36 | - | 6 ~ 12 | 2 | 68 ~ 86 | - | Powerful Torsion (45°-60°) | - | Non-Coated | - | Square |
From: 3,357,701 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIA Coated Router for CFRP (2-Flute / Herringbone Type)
OSG
[Features]· CFRP Router Series[Applications]· Work Material: Composite Material[Material]· Cemented Carbide
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 10 | 18 ~ 30 | - | 6 ~ 10 | 2 | 68 ~ 80 | - | Powerful Torsion (45°-60°) | - | Dia Coat | - | Square |
From: 5,752,160 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
Product SeriesDòng sản phẩm | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS | 4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available] | Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Stub (Super Hard)_WX-PHSS | WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Long (Super Hard)_WX-PHL | ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Short_FX-MG-EHS | ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Long_FX-MG-EHL | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE | ||||||
From | 1,342,414 VND- | 1,810,000 VND- | 966,666 VND- | 2,097,424 VND- | 1,617,034 VND- | 2,691,517 VND- | 1,713,427 VND- | 1,793,885 VND- | 1,882,212 VND | 2,257,750 VND- | 2,930,728 VND- | 3,242,922 VND- | 4,750,777 VND- | 3,357,701 VND- | 5,752,160 VND- |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 15 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Blade diameter (D)(φ) | 3 ~ 12 | 4 ~ 6 | 1 ~ 20 | 1.5 ~ 30 | 2.5 ~ 20 | 3 ~ 30 | 3 ~ 5 | 3 ~ 5 | 3 | 6 ~ 25 | 6 ~ 12 | 10 ~ 14 | 6 ~ 25 | 6 ~ 12 | 6 ~ 10 |
Blade length (ℓ)(mm) | 4.5 ~ 18 | 11 ~ 13 | 2.5 ~ 38 | 5 ~ 55 | 3.8 ~ 30 | 10 ~ 55 | 10 ~ 17 | 12 ~ 20 | 8 | 13 ~ 45 | 20 ~ 40 | 15 ~ 21 | 25 ~ 90 | 18 ~ 36 | 18 ~ 30 |
Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Shank diameter (d)(mm) | 6 ~ 12 | 6 | 6 ~ 20 | 6 ~ 32 | 6 ~ 20 | 6 ~ 32 | 6 | 6 | 6 | 6 ~ 25 | 6 ~ 12 | 8 ~ 12 | 6 ~ 25 | 6 ~ 12 | 6 ~ 10 |
Number of flutes(sheet) | 3 | 4 | 4 ~ 6 | 4 ~ 8 | 4 | 4 ~ 8 | 4 | 4 | 3 | 3 ~ 4 | 3 | 4 | 6 ~ 8 | 2 | 2 |
Overall Length (L)(mm) | 50 ~ 75 | 60 | 60 ~ 110 | 60 ~ 140 | 60 ~ 125 | 80 ~ 200 | 60 | 60 | 50 | 50 ~ 120 | 60 ~ 90 | 130 ~ 160 | 70 ~ 165 | 68 ~ 86 | 68 ~ 80 |
work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | - | - |
Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | - | - |
Coating | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | Dia Coat |
Blade tip shape | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | - | - |
Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy