MITUTOYO Dial Gauges（Application：Standard Type）

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation

  MITUTOYO

  • Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle is made of high-strength quench hardened stainless steel suitable for heavy duty use.• A carbide contact point is used.• The grand gear is made of stainless steel with high resistance to wear and deformation.• Application of a hard coating on the surface of the crystal makesthe gauge highly scratch and chemical-resistant.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	1.1 to 5 ～ 6~20	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)

  MITUTOYO

  Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Digital	-	NA	-	-	-

  From: 9,377,000 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Long Stroke Type

  MITUTOYO

  2 Series Regular Dial Gauge, Long Stroke Type

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	6~20 ～ 21 to 50	Available / NA	NA	Continuous Scale / Reverse Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.03inch)

  MITUTOYO

  • Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type(Repeatability(µm): ±0.3/1/2/3)

  MITUTOYO

  ANSI/AGD Type Metric Dial Indicator(Thread Contact Point Compatible Type)[Features]· Range (Range/rev):0.08mm(0.1mm) to 50mm(1mm)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Under 1 Turn Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.1	Dial	0–1 ～ 1.1 to 5	NA	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge 543 Series, Digimatic Indicator ID-H

  MITUTOYO

  World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.0005/0.001 switching	Digital	21 to 50	NA	Available	-	-

  From: 13,252,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type

  MITUTOYO

  Dial gauge with a compact design. Does not take up space when attached to jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.002 ～ 0.01	Dial	0–1 ～ 1.1 to 5	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Dial Gauge, 3/4 Series Long Stroke

  MITUTOYO

  The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 51 to 100	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)

  MITUTOYO

  [Features]· Uses Mitutoyo's original shockproof mechanism with a buffering mechanism, making it excellent in durability and impact resistance.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.02	Dial	1.1 to 5	NA	NA	Balance Scale	-

  From: 1,933,333 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Plunger Type Dial Indicator SERIES 1

  MITUTOYO

  • Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in situations where standard dial gauges are difficult to read. • Model 1960T and 1961T, which uses Mitutoyo’s proprietary shock-proofing mechanism, hasexcellent durability and shock resistance.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B • ABS (absolute) sensor These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) sensor, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this sensor ensures that overspeed errors do not occur, which improves reliability. • Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  From: 3,716,667 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Pocket Type Dial Test Indicator Series 513

  MITUTOYO

  • Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Pocket Type Dial Test Indicator SERIES 513

  MITUTOYO

  • Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type

  MITUTOYO

  Dial Indicators Series 2- Metric Standard Type [FEATURES]Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.A carbide contact point is used.The grand gear uses stainless steel that is resistant to wear and deformation.Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.[Usage]· For comparative measurement. Installation on jigs.[Specification]· Measurement Range (mm): 0 to 10· Minimum Display (mm): 0.010· Graduation Specification: 0-100· Mount Shaft Diameter (mm): 8·Measuring Force (N): 2.5 or less·Dial diameter: 57 mm

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 1.1 to 5	Available	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Standard Dial Gauge (Guide Adjustment Type)

  MITUTOYO

  Rotate the head knob to adjust the pointer position independent of the vertical movement of the spindle.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	6~20	NA	NA	Continuous Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1	Available	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge Flat Back Cover with Handles

  MITUTOYO

  A flat rear cover designed for the dial gauge.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	1.1 to 5	-	-	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Snap Gage(Measuring Range: 0-300mm)

  MITUTOYO

  • Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes. • Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils. • Anvil retracting stroke: 2mm/.080”Anvil positioning range: 25mm/ 1” • Adjustment nut: adjusts the measuring range. • Clamp: adjustment nut • Flatness of measuring face: 1μm • Stability of indication: 2μm or less (stability of indicators is not included) • The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Snap Gage(Measuring Range: 0-12inch)

  MITUTOYO

  • Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes. • Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils. • Anvil retracting stroke: 2mm/.080” Anvil positioning range: 25mm/ 1” • Adjustment nut: adjusts the measuring range. • Clamp: adjustment nut • Flatness of measuring face: 1μm • Stability of indication: 2μm or less (stability of indicators is not included) • The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Special Dial Indicators

  MITUTOYO

  Adjustable hand dial gauge ● The hand position can be adjusted independently of the position of the spindle by rotating the top knob.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 3, 4 — Long StrokeType, Large Diameter(Measuring Range: 0.025-4inch)

  MITUTOYO

  • Dial indicators with a large-diameter dial face for easy reading. • Models with longer measuring ranges are also available. • All types are supplied with limit markers and a bezel clamp as standard. • Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use. • The bezel clamp and lifting lever (optional)*1 can be attached to either the right or left side. These parts can be easily installed and removed without tools. *1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10 and 4046S.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 1 — Compact One Revolution Type for Error-free Reading

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistanceto shock due to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed” . • One revolution type Back plunger dial gages are also available.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.25inch)

  MITUTOYO

  • Compact dial indicators with bezel diameters of ø40mm forrestricted-space applications in gaging jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.1inch)

  MITUTOYO

  • Compact dial indicators with bezel diameters of ø31 or ø36mmfor restricted-space applications in gaging jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type

  MITUTOYO

  • Excellent water- and drip-proof characteristics (IP43). • Smooth movement thanks to the improved design of bush and stem. • Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant. • Lightweight type (70g).

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Waterproof Type

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shockdue to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed”. • One revolution type Back plunger dial gages are also available.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed”.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard Type, Inch Reading(Measuring Range: 0.025-1inch)

  MITUTOYO

  [Features]· Dust-proof performance has been improved by eliminating the through-screw for the outer frame clamp. Prevents dirt and oil from entering from outside. · The outer frame is made of a material with improved impact resistance and oil resistance. Furthermore, the shape of the large plate has been improved to improve readability.· By adopting a newly shaped stem bush, the spindle can operate smoothly no matter where on the stem it is clamped (maximum tightening torque of 150 Ncm when tightening one M5 screw).· Anti-fouling and anti-reflection coating applied to the surface. Dirt and glare are reduced, improving visibility.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-U — Slim and Economical Design SERIES 575-12□

  MITUTOYO

  • General purpose indicator with the measuring range of 25.4mm/ 1”. • Cost-effective and user-friendly type which is equipped with the basic functions necessary. • The ABS (absolute) sensor restores the last origin position automatically when the indicatoris turned on, and realizes high reliability by eliminating over-speed errors. • Battery life of 20,000 hours in continuous use has been achieved. • Easy-to-read large LCD readout with the character height of 8mm. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  From: 4,995,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	Regular Dial Gauge 2 Series, Long Stroke Type	Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.03inch)	ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type(Repeatability(µm): ±0.3/1/2/3)	Regular Dial Gauge 2 Series, Under 1 Turn Type	Dial Gauge 543 Series, Digimatic Indicator ID-H	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Large Dial Gauge, 3/4 Series Long Stroke	2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543	Back Plunger Type Dial Indicator SERIES 1	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)	Dial Gauge, Pocket Type Dial Test Indicator Series 513	Pocket Type Dial Test Indicator SERIES 513	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	2 Series Standard Dial Gauge (Guide Adjustment Type)	2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type	Dial Gauge Flat Back Cover with Handles	Dial Snap Gage(Measuring Range: 0-300mm)	Dial Snap Gage(Measuring Range: 0-12inch)	SERIES 2 — Special Dial Indicators	SERIES 3, 4 — Long StrokeType, Large Diameter(Measuring Range: 0.025-4inch)	SERIES 1 — Compact One Revolution Type for Error-free Reading	SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.25inch)	SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.1inch)	SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type	SERIES 2 — Standard One Revolution Type for Error-free Reading, Waterproof Type	SERIES 2 — Standard One Revolution Type for Error-free Reading	SERIES 2 — Standard Type, Inch Reading(Measuring Range: 0.025-1inch)	ABSOLUTE Digimatic Indicator ID-U — Slim and Economical Design SERIES 575-12□
From	-	-	9,377,000 VND	-	-	-	-	13,252,500 VND	-	-	1,933,333 VND	-	-	3,716,667 VND	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4,995,000 VND-
Days to ShipSố ngày giao hàng	46 Day(s) or more	Quote	Quote	Quote	Quote	Quote	Same day or more	9 Day(s)	8 Day(s) or more	Quote	46 Day(s)	46 Day(s) or more	Quote	Quote	Quote	Quote	Quote	Quote	Quote	Quote	46 Day(s) or more	Quote	Quote	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Quote	46 Day(s) or more	Quote	46 Day(s)
Application	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type
Scale interval minimal display(mm)	0.001 ～ 0.01	-	0.01	0.01	-	-	0.001 ～ 0.1	0.0005/0.001 switching	0.002 ～ 0.01	0.001 ～ 0.01	0.02	-	-	-	-	-	0.001 ～ 0.01	0.01	0.001	0.01	-	-	-	-	-	-	-	-	-	-	-	-
Display Method	Dial	Dial	Digital	Dial	Digital	-	Dial	Digital	Dial	Dial	Dial	Digital	Dial	Digital	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	-	-	Dial	Dial	-	-	-	-	Digital
Maximum Measurement Length (Range Selection)(mm)	1.1 to 5 ～ 6~20	-	-	6~20 ～ 21 to 50	-	-	0–1 ～ 1.1 to 5	21 to 50	0–1 ～ 1.1 to 5	0–1 ～ 51 to 100	1.1 to 5	-	-	-	-	-	0–1 ～ 1.1 to 5	6~20	0–1	1.1 to 5	-	-	-	-	-	-	-	-	-	-	-	-
Waterproof Function	NA	-	NA	Available / NA	-	-	NA	NA	NA	NA	NA	-	-	-	-	-	Available	NA	Available	-	-	-	-	-	-	-	-	-	-	-	-	-
Output terminal for measuring data: with or without	NA	-	-	NA	-	-	NA	Available	NA	NA	NA	-	-	-	-	-	NA	NA	NA	-	-	-	-	-	-	-	-	-	-	-	-	-
Scale type	Continuous Scale / Balance Scale	-	-	Continuous Scale / Reverse Scale	-	-	Balance Scale	-	Continuous Scale / Balance Scale	Continuous Scale / Balance Scale	Balance Scale	-	-	-	-	-	Continuous Scale / Balance Scale	Continuous Scale	Balance Scale	Balance Scale	-	-	-	-	-	-	-	-	-	-	-	-
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…