MISUMI Jigs for Manual Tightening

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Jack (SJK)

  MISUMI

  Model SJK-K is provided with a through hole in the center of the jack allowing the jack to be fixed by a bolt, etc. No. E-175A attachment is usable for the SJK type.

  • Volume Discount

  From: 763,818 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holding Clamp Set

  MISUMI

  Supplied with a hex bar wrench. Complete fastening with sliding mechanism. One-point attachment and detachment allow time reduction. For full surface machining of the work piece and perforating. Complete heat treatment allows semipermanent use. Floating prevention mechanism type.

  • Volume Discount

  From: 8,169,526 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TAK Clamp (Eccentric Washer Cam Clamp)

  MISUMI

  [Features]·Workpieces can be clamped simply by tightening bolts, so setup time can be reduced·Load in table direction is applied to workpiece by action of tapered surface of washer, which suppresses lifting of workpiece

  • Volume Discount

  From: 297,561 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toa Adjust Clamp【2 Pieces Per Package】

  MISUMI

  Ideal for clamping thin workpieces. Fastening the toe pressing downwardly allows to prevent the machining material from floating. Long-lasting use is possible because the tow is quenched.

  • Volume Discount

  From: 13,771,676 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Support Screw Jack (CSJ)

  MISUMI

  Convenient for supporting various clamps. Allows connecting use of 2 or 3 in the case of one screw not being effective or lacking in height. Use of an attachment allows convenient support for deformed objects.

  • Volume Discount

  From: 958,263 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Lock Screw【1-5 Pieces Per Package】

  MISUMI

  [Features]·Even if screw is turned, head that comes in contact with workpiece does not rotate, preventing damage to workpiece·By inserting ball between head part and thread section, cutting force is transmitted to threaded part via ball, making it more difficult to loosen than conventional screws·Tightening torque is directly converted into clamping force linearly, so fastening is stronger than conventional screws

  • Volume Discount

  From: 193,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Injeck Clamp Q-model

  MISUMI

  Clamping with mold bases is easy. The clamp and step block are connected to prevent losing. Opening of the oblong hole allows easy attachment and detachment from the side. Can be adjusted to 4 different heights by changing the position of the step block of the main unit.

  • Volume Discount

  From: 1,595,198 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Seat, Flat Model

  MISUMI

  [Features]·Used for height adjustment of workpiece during machine finishing·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling·Materials: S45C (Unhardened steel)·Height can be specified in 5 mm increments (Height tolerance within ±0.02)

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Seat, Counter Bores Mounted Model

  MISUMI

  [Features]·Used for height adjustment of workpiece during machine finishing·Can be fixed with bolts·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling·Materials: S45C (Unhardened steel)·Height can be specified in 5 mm increments (Height tolerance within ±0.02)

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Screw Jack (SJK)	Holding Clamp Set	TAK Clamp (Eccentric Washer Cam Clamp)	Toa Adjust Clamp【2 Pieces Per Package】	Clamp Support Screw Jack (CSJ)	High Lock Screw【1-5 Pieces Per Package】	Injeck Clamp Q-model	Round Seat, Flat Model	Round Seat, Counter Bores Mounted Model
From	763,818 VND-	8,169,526 VND-	297,561 VND-	13,771,676 VND-	958,263 VND-	193,926 VND-	1,595,198 VND-	-	-
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more

Loading...Tải…