MISUMI Carbide Ball End Mills（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]·General purpose 2-blade ball end mill for wide range of profiling·For surface coarse of workpiece, good surface finish can be expected after machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 517,970 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Long shank type ideal for deep cavity millingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]·Regular bridge length allows for many regrinding times·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 328,423 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 2-flute / long neck model

  MISUMI

  [Features]·Long neck shape suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	3 ～ 8	2	40 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

  MISUMI

  A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	3 ～ 6	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: 373,047 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • Volume Discount

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	Quenched and tempered steel[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 3,921,372 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	Quenched and tempered steel[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 437,250 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	4 ～ 6	2	50 ～ 110	Quenched and tempered steel[◎]	±0.005	Curved surface / Side / Engraving / R Groove	MRC	Long-Neck Ball

  From: 494,588 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	Quenched and tempered steel[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,240,084 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]·Compatible with shrink fit chucks for high-precision machining·Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 531,732 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability·For surface coarse of workpiece, good surface finish can be expected after machining.·Long shank type, ideal for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 996,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

  MISUMI

  A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	-	4 ～ 55	6 ～ 10	2	70 ～ 90	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball / Spherical Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

  MISUMI

  [Features]·High stiffness 2-flute type with length taper shape·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 5	0.3 ～ 8	2 ～ 60	4 ～ 12	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: 910,827 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	Quenched and tempered steel[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,363,947 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	Quenched and tempered steel[◎]	±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,362,905 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]·Good finish can be expected for surface coarse of workpiece after processingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide ball end mill, 2-flute / short model

  MISUMI

  Highly versatile due to the non-coated specification

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.8 ～ 25	-	3 ～ 20	2	40 ～ 150	Quenched and tempered steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]·High-feed, high stiffness 3-flute taper shape with taper length·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 3-flute / long neck model

  MISUMI

  [Features]·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	3 ～ 50	4 ～ 6	2 ～ 3	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 4-flute / long neck model

  MISUMI

  [Features]·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	1.6 ～ 6	4 ～ 30	4 ～ 6	4	50 ～ 70	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	Quenched and tempered steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 2,514,992 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5	1	-	4	2	40	Quenched and tempered steel[○]	±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 544,661 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining·Taper neck is effective in suppressing chattering·Machining of high hardness steel up to 65HRC is possible·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	Quenched and tempered steel[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: 1,575,389 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

  MISUMI

  Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	3 ～ 15	-	6 ～ 10	2	50 ～ 100	Quenched and tempered steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 2,247,724 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

  MISUMI

  High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 10	0.4 ～ 25	-	4 ～ 20	2	50 ～ 150	Quenched and tempered steel[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: 461,043 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

  MISUMI

  The user friendly regular flute length type is released simultaneously

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	-	4 ～ 16	2	50 ～ 140	Quenched and tempered steel[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: 463,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model

  MISUMI

  [Features]·Realizes high durability by processing mold material of 60HRC or more·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • SH-a
  • High-Hardness Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	6 ～ 22	-	6 ～ 12	2	50 ～ 110	Quenched and tempered steel[◎]	±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 715,386 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill 2-Flute / Short/Long Shank Type

  MISUMI

  A long shank type ideal for deep carving

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 10	4 ～ 25	-	3 ～ 20	2	80 ～ 250	Quenched and tempered steel[◎]	-7 to +3 ～ ±10	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 763,200 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	XAC series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, regular model	XAL series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 4-flute / regular model	TSC series carbide long neck ball end mill, 2-flute / long neck model	XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model	CBN Ball End Mill, 2-Flute	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model	XAL Series Carbide Ball End Mill 2-Flute / Short/Long Shank Type
From	517,970 VND-	-	-	328,423 VND Special Price On Sale Till 31/03/2025	-	-	373,047 VND-	3,921,372 VND-	437,250 VND-	494,588 VND-	1,240,084 VND-	531,732 VND-	996,240 VND-	-	910,827 VND-	1,363,947 VND-	-	1,362,905 VND-	-	-	-	-	-	-	-	-	2,514,992 VND-	544,661 VND	1,575,389 VND-	2,247,724 VND-	461,043 VND-	463,676 VND-	715,386 VND-	763,200 VND-
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TiAlN General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	XAL General Steel 2 Flutes	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	XAL General Steel 2 Flutes	High-Hardness Steel 2 Flutes		MR General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	XAL General Steel 2 Flutes	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	Non-Coated General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes	TS SUS 2 Flutes S (Short)	MR General Steel 2 Flutes S (Short)	MR General Steel 2 Flutes R (Regular)	SH-a High-Hardness Steel 2 Flutes R (Regular)	XAL General Steel 2 Flutes S (Short)
R Size(mm)	0.2 ～ 12.5	0.5 ～ 12.5	0.2 ～ 8	0.05 ～ 10	1.5 ～ 6	0.05 ～ 3	0.05 ～ 3	0.3 ～ 1	0.5 ～ 12.5	0.05 ～ 3	1.5 ～ 3	0.2 ～ 6	2 ～ 8	0.5 ～ 5	0.15 ～ 5	0.3 ～ 3	0.2 ～ 8	0.3 ～ 2	0.05 ～ 10	0.5 ～ 10	1 ～ 6	1 ～ 10	0.2 ～ 10	0.5 ～ 3	0.5 ～ 3	1 ～ 3	1 ～ 5	0.5	0.5 ～ 3	1 ～ 5	0.1 ～ 10	0.2 ～ 8	1 ～ 6	1.5 ～ 10
Blade length (ℓ)(mm)	0.8 ～ 50	2 ～ 30	1.5 ～ 30	0.2 ～ 38	5 ～ 22	0.07 ～ 8	0.07 ～ 6	0.5 ～ 1.2	1 ～ 25	0.07 ～ 6	4.5 ～ 9	0.4 ～ 12	8 ～ 30	-	0.3 ～ 8	0.6 ～ 6	1.5 ～ 48	0.6 ～ 4	0.2 ～ 25	2 ～ 25	5 ～ 22	3 ～ 25	0.8 ～ 25	0.8 ～ 6	0.8 ～ 4.8	1.6 ～ 6	1 ～ 5	1	0.8 ～ 4.8	3 ～ 15	0.4 ～ 25	1.5 ～ 30	6 ～ 22	4 ～ 25
Underneck length (ℓ1)(mm)	-	15 ～ 80	17 ～ 80	-	17 ～ 72	0.2 ～ 60	0.2 ～ 60	1.5 ～ 5	2.2 ～ 50	0.2 ～ 60	-	-	-	4 ～ 55	2 ～ 60	-	-	-	15 ～ 75	15 ～ 75	17 ～ 72	15 ～ 75	-	7 ～ 60	3 ～ 50	4 ～ 30	5 ～ 10	-	20 ～ 50	-	-	-	-	-
Shank diameter (d)(mm)	3 ～ 25	3 ～ 25	4 ～ 16	3 ～ 20	6 ～ 12	3 ～ 8	3 ～ 6	4	4 ～ 25	4 ～ 6	6	4 ～ 12	4 ～ 16	6 ～ 10	4 ～ 12	6	4 ～ 16	6	3 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	3 ～ 20	4 ～ 8	4 ～ 6	4 ～ 6	6 ～ 10	4	4 ～ 8	6 ～ 10	4 ～ 20	4 ～ 16	6 ～ 12	3 ～ 20
Number of flutes(sheet)	2	2	2	2	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	2	3	2 ～ 3	4	2	2	3	2	2	2	2	2
Overall Length (L)(mm)	40 ～ 180	70 ～ 280	50 ～ 140	40 ～ 160	60 ～ 110	40 ～ 110	50 ～ 110	50	40 ～ 180	50 ～ 110	60 ～ 90	40 ～ 65	100 ～ 250	70 ～ 90	50 ～ 110	40	50 ～ 140	40	40 ～ 150	50 ～ 150	50 ～ 110	50 ～ 150	40 ～ 150	50 ～ 110	50 ～ 110	50 ～ 70	50 ～ 90	40	70 ～ 110	50 ～ 100	50 ～ 150	50 ～ 140	50 ～ 110	80 ～ 250
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]
R Precision(μm)	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.005	±5 ～ ±10	±0.005	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.01	±0.003	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.005	-7 to +3 ～ ±10
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	MRC	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	MRC	MRC	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)
Type	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball / Spherical Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball

Loading...Tải…