MISUMI Roughing End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  XAC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  Strongly supports the cost reduction of roughing with the limited special price for standard sizes

  • Volume Discount

  • TiAlN
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	16 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: 1,478,634 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / short model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 66	6 ～ 20	4	57 ～ 104	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Popular DLC coated type of aluminum roughing

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	DLC	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Roughing End Mill

  MISUMI

  [Features]・High-speed rotation is possible by adopting a 45° helix. ・Using a fine pitch nick, the surface roughness after processing is also excellent. ・The conductivity is minimal. 《Additional machining》・Additional neck relief machining can be specified using MISUMI standard tools. ・No need to create drawings. You can order by simply specifying the dimensions using the model number. ・Available starting from 1 piece, ``just the quantity you need when you need it.'' ・Delivered on the 3rd day.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 30	-	6 ～ 12	3 ～ 4	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 72	6 ～ 20	3 ～ 4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Significantly reduces the roughing time of aluminum

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	XAC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / short model	DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	VAC Series Carbide Roughing End Mill	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model
From	1,478,634 VND Special Price On Sale Till 31/03/2025	-	-	-	-	-	-	-	-	-	-	-
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TiAlN General Steel R (Regular)	TS General Steel 4 Flutes S (Short)	DLC Aluminum 3 Flutes R (Regular)		TS General Steel R (Regular)	TS General Steel R (Regular)	TS General Steel 4 Flutes L (Long)	TS General Steel R (Regular)	TS General Steel S (Short)	TS General Steel L (Long)	TS General Steel R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)
Blade diameter (D)(φ)	6 ～ 20	5 ～ 20	5 ～ 20	3 ～ 12	3 ～ 20	3 ～ 20	6 ～ 20	5 ～ 20	5 ～ 20	6 ～ 20	6 ～ 20	5 ～ 20
Blade length (ℓ)(mm)	16 ～ 38	10 ～ 38	15 ～ 45	8 ～ 30	15 ～ 45	15 ～ 45	25 ～ 65	15 ～ 45	10 ～ 38	25 ～ 65	15 ～ 45	15 ～ 45
Underneck length (ℓ1)(mm)	-	17 ～ 66	20 ～ 70	-	20 ～ 92	20 ～ 92	30 ～ 112	20 ～ 95	17 ～ 72	30 ～ 112	20 ～ 95	20 ～ 70
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20
Number of flutes(sheet)	3 ～ 4	4	3	3 ～ 4	3 ～ 4	3 ～ 4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3
Overall Length (L)(mm)	57 ～ 104	57 ～ 104	57 ～ 100	50 ～ 80	60 ～ 130	60 ～ 130	100 ～ 150	100 ～ 150	60 ～ 110	100 ～ 150	100 ～ 150	57 ～ 100
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]
Torsion Angle (θ)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	-	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	TiAlN	For High Hardness (Silicon Group)	DLC	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated
Blade tip shape	C plane	Micro R	Micro R	-	C plane	Micro R	Micro R	Micro R	C plane	C plane	C plane	Micro R
Type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing

Loading...Tải…