(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
MISUMI Carbide Square End Mills（Page3）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
133 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
MISUMI
Ideal for the standing-wall finish of stainless steel
- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 10.5 ～ 38 - 6 ～ 12 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) C plane Square From: 2,370,486 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more 
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time
- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 20 14 ～ 42 - 6 ～ 20 4 60 ～ 120 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Inclined Cuts For High Hardness (Silicon Group) C plane Square From: 2,659,915 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
- Volume Discount
- DIA
- Aluminum
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 2 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts Dia Coat Sharp Edge Square From: 1,981,882 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
- Volume Discount
- DIA
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 3 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts Dia Coat With Lead Square From: 2,506,498 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model
MISUMI
Short flute length that suppresses chattering
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 17 ～ 73 4 ～ 20 2 40 ～ 110 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking DLC Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1.5 ～ 60 23 ～ 92 4 ～ 20 2 40 ～ 130 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking DLC Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
4D flute length type that's ideal for deep engraving
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 5 ～ 48 29 ～ 70 6 ～ 12 2 60 ～ 100 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking DLC Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2 ～ 24 17 ～ 50 4 ～ 12 3 40 ～ 80 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking DLC With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
The unique tip pocket shape improves the discharging of chips
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1.5 ～ 60 23 ～ 92 4 ～ 20 3 40 ～ 130 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking DLC With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Given the rounded edge on the blade rear end, it suppresses machining streaks
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 5 ～ 22 9 ～ 33 - 4 ～ 20 3 80 ～ 200 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts DLC Micro R Square From: 1,368,948 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 18 3 ～ 36 4 ～ 12 3 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 618,686 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type
MISUMI
A non-coated type that does not impair the sharpness of the blade
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1 ～ 40 17 ～ 73 4 ～ 20 2 40 ～ 110 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Affordable, non-coated type of the Aluminum Processing Series
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1.5 ～ 60 23 ～ 92 4 ～ 20 2 40 ～ 130 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated Sharp Edge Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
The large rake angle prevents the built-up edge that's unique to aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 5 ～ 48 29 ～ 70 6 ～ 12 2 60 ～ 100 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model
MISUMI
Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- EXL (Extra Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 15 ～ 60 - 6 ～ 12 2 60 ～ 130 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Inclined Cuts Non-Coated Sharp Edge Square From: 1,174,608 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2 ～ 24 17 ～ 50 4 ～ 12 3 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity!
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1.5 ～ 60 23 ～ 92 4 ～ 20 3 40 ～ 130 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model
MISUMI
[Features]·Uses a sharp cutting edge to suppress the built-up edge unique to aluminum·The unique chip pocket shape enables grooving with a depth of cut equivalent to that of a 2-flute cutting tool.·Can be re-polished. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
- Volume Discount
- Non-Coated
- Aluminum
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 1.5 ～ 28 22 ～ 50 4 ～ 12 4 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Inclined Cuts Non-Coated Sharp Edge Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6.2 ～ 16.2 9 ～ 24 - 6 ～ 16 3 80 ～ 180 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts Non-Coated Micro R Square From: 1,557,247 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model
MISUMI
DLC coated long neck square with both sharpness and durability
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 6 1 ～ 12 4 ～ 40 4 ～ 6 2 40 ～ 110 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts DLC Sharp Edge Long-Neck Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model
MISUMI
Popular DLC coated type of aluminum roughing
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 5 ～ 20 15 ～ 45 20 ～ 70 6 ～ 20 3 57 ～ 100 Aluminum[◎] / Copper[○] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts DLC Micro R Roughing Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model
MISUMI
[Features]·Long neck shape prevents tool interference during deep cutting (body length can be selected according to machining).·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·CrN coating with excellent lubricity is ideal for copper electrode processing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- CrN
- Copper
- 2 Flutes
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 3 0.7 ～ 4.5 2 ～ 40 4 ～ 6 2 50 ～ 100 Aluminum[○] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts CrN Sharp Edge Square From: 1,041,780 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
- Volume Discount
- DIA
- Graphite
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 5 ～ 60 10 ～ 85 4 ～ 12 2 75 ～ 200 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Dia Coat Sharp Edge Square From: 2,866,841 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model
MISUMI
[Features]·Uncoated product with excellent cost-effectiveness·Deep digging is possible due to long flute length·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- Graphite
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 5 ～ 60 10 ～ 85 4 ～ 12 2 75 ～ 200 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated Sharp Edge Square From: 1,890,031 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
- Volume Discount
- DIA
- Graphite
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 12 10 ～ 60 20 ～ 85 4 ～ 12 4 75 ～ 200 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts Dia Coat Sharp Edge Square From: 2,866,841 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model
MISUMI
[Features]·Uncoated product with excellent cost-effectiveness·Deep digging is possible due to long flute length·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- Graphite
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 12 10 ～ 60 20 ～ 85 4 ～ 12 4 75 ～ 200 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts Non-Coated Sharp Edge Square From: 1,890,031 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model
MISUMI
Available in 10 sizes including the long shank type
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 10 3 ～ 20 - 1 ～ 10 2 65 ～ 180 Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts Non-Coated Sharp Edge Square From: 953,574 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 0.75 ～ 30 - 4 ～ 20 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 8 ～ 26 - 6 ～ 12 4 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Plunging (Z feed) / Inclined Cuts For High Hardness (Silicon Group) With Lead Square From: 831,966 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Non-Coated
- General Steel
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 3 ～ 60 - 4 ～ 20 2 ～ 4 40 ～ 130 general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) / Non-Coated With Lead Square Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model
MISUMI
Blade relief type with a 4-flute structure
- General Steel
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 12 - - 6 ～ 12 4 60 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side Non-Coated With Lead Square Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Definitive edition of high-hardness steel machining type that combines high durability and low price
- Volume Discount
- SH-b
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 6 18 6 6 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Plane / Side For High Hardness (Silicon Group) Micro R High Helical From: 1,297,845 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
Definitive edition of high-hardness steel machining type that combines high durability and low price
- Volume Discount
- SH-b
- High-Hardness Steel
- Multi-Flutes （5 ~）
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 5 - 6 4 60 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Plane / Side / Inclined Cuts For High Hardness (Silicon Group) Micro R High Helical From: 903,737 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° square end mill with a long contact surface between work material and blade that provides a long tool life.
- Volume Discount
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 4.5 ～ 18 - 3 ～ 12 4 40 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type
MISUMI
Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1 ～ 40 - 4 ～ 20 2 40 ～ 110 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking Non-Coated - Square From: 290,681 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 20 1.5 ～ 60 - 4 ～ 20 2 40 ～ 130 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking Non-Coated - Square From: 384,189 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model
MISUMI
Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 15 ～ 60 - 6 ～ 12 2 60 ～ 130 Aluminum[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking Non-Coated - Square From: 691,539 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 25 4 ～ 50 - 6 ～ 25 4 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Variable lead Plane / Side / Groove For High Hardness (Silicon Group) With Lead Square From: 1,087,863 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Effective for processing deep parts due to extra long blade length·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 6 ～ 20 2 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square From: 680,058 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Suppresses chattering with unequal lead and unequal flutes·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Stable machining is possible while maintaining finished surface accuracy·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 45 - 6 ～ 20 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)
MISUMI
[Features]・Adopts unequal leads to suppress chatter and achieve high efficiency machining・Optimum groove shape realizes smooth chip discharge・Minimum electrical conductivity・Can be re-polished.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 25 8 ～ 38 - 6 ～ 25 4 57 ～ 104 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·General purpose blade length regular type 2-flute·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.3 ～ 20 0.6 ～ 45 - 4 ～ 20 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)
MISUMI
[Features]·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 7 ～ 26 - 6 ～ 20 4 54 ～ 92 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model | Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type | Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model | Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model | DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model | Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model | Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model | Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model | XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type | Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model) | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model) | |||||||||||
| From | 2,370,486 VND- | 2,659,915 VND- | 1,981,882 VND- | 2,506,498 VND- | - | - | - | - | - | 1,368,948 VND- | 618,686 VND- | - | - | - | 1,174,608 VND- | - | - | - | 1,557,247 VND- | - | - | 1,041,780 VND- | 2,866,841 VND- | 1,890,031 VND- | 2,866,841 VND- | 1,890,031 VND- | 953,574 VND- | - | 831,966 VND- | - | - | 1,297,845 VND | 903,737 VND | - | 290,681 VND- | 384,189 VND- | 691,539 VND- | 1,087,863 VND- | 680,058 VND- | - | - | - | - |
| Days to ShipSố ngày giao hàng | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | Same day | Same day | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Blade diameter (D)(φ) | 3 ～ 12 | 6 ～ 20 | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 1 ～ 12 | 0.5 ～ 20 | 5 ～ 22 | 1 ～ 12 | 0.5 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 0.5 ～ 20 | 0.5 ～ 12 | 6.2 ～ 16.2 | 0.5 ～ 6 | 5 ～ 20 | 0.5 ～ 3 | 1 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 1 ～ 10 | 0.5 ～ 20 | 3 ～ 12 | 2 ～ 20 | 6 ～ 12 | 6 | 2 | 3 ～ 12 | 0.5 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 2 ～ 25 | 1 ～ 20 | 2 ～ 20 | 3 ～ 25 | 0.3 ～ 20 | 3 ～ 20 |
| Blade length (ℓ)(mm) | 10.5 ～ 38 | 14 ～ 42 | 3 ～ 36 | 3 ～ 36 | 2 ～ 40 | 1.5 ～ 60 | 5 ～ 48 | 2 ～ 24 | 1.5 ～ 60 | 9 ～ 33 | 1.5 ～ 18 | 1 ～ 40 | 1.5 ～ 60 | 5 ～ 48 | 15 ～ 60 | 2 ～ 24 | 1.5 ～ 60 | 1.5 ～ 28 | 9 ～ 24 | 1 ～ 12 | 15 ～ 45 | 0.7 ～ 4.5 | 5 ～ 60 | 5 ～ 60 | 10 ～ 60 | 10 ～ 60 | 3 ～ 20 | 0.75 ～ 30 | 8 ～ 26 | 3 ～ 60 | - | 6 | 5 | 4.5 ～ 18 | 1 ～ 40 | 1.5 ～ 60 | 15 ～ 60 | 4 ～ 50 | 4 ～ 80 | 6 ～ 45 | 8 ～ 38 | 0.6 ～ 45 | 7 ～ 26 |
| Underneck length (ℓ1)(mm) | - | - | - | - | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | 17 ～ 50 | 23 ～ 92 | - | 3 ～ 36 | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | - | 17 ～ 50 | 23 ～ 92 | 22 ～ 50 | - | 4 ～ 40 | 20 ～ 70 | 2 ～ 40 | 10 ～ 85 | 10 ～ 85 | 20 ～ 85 | 20 ～ 85 | - | - | - | - | - | 18 | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 6 ～ 16 | 4 ～ 6 | 6 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 1 ～ 10 | 4 ～ 20 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 | 6 | 3 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 4 ～ 20 | 6 ～ 20 |
| Number of flutes(sheet) | 3 | 4 | 2 | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 3 | 2 | 3 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 2 ～ 4 | 4 | 6 | 4 | 4 | 2 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 4 |
| Overall Length (L)(mm) | 60 ～ 100 | 60 ～ 120 | 40 ～ 80 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 | 40 ～ 80 | 40 ～ 130 | 80 ～ 200 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 | 60 ～ 130 | 40 ～ 80 | 40 ～ 130 | 40 ～ 80 | 80 ～ 180 | 40 ～ 110 | 57 ～ 100 | 50 ～ 100 | 75 ～ 200 | 75 ～ 200 | 75 ～ 200 | 75 ～ 200 | 65 ～ 180 | 40 ～ 110 | 60 ～ 100 | 40 ～ 130 | 60 ～ 85 | 50 | 60 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 130 | 50 ～ 120 | 60 ～ 200 | 50 ～ 100 | 57 ～ 104 | 40 ～ 100 | 54 ～ 92 |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Variable lead | - | - | - | - | - |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Dia Coat | Dia Coat | DLC | DLC | DLC | DLC | DLC | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | DLC | CrN | Dia Coat | Non-Coated | Dia Coat | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | - | - | - | - | - |
| Blade tip shape | C plane | C plane | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Micro R | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | Micro R | Sharp Edge | Micro R | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Micro R | Micro R | With Lead | - | - | - | With Lead | - | - | - | - | - |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | High Helical | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
62
-
63
-
64
-
65
-
66
-
67
-
70～70.50
- 70
- 70.50
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
105
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
180
-
200
[4-75/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
- AlTiN
- BLUE
- TiSiN
- HS
- FX
- X코팅
- TACrN
- TiALN
- DIA
- A+
-
Blade tip shape
-
Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy