KYOCERA Grooving / Cutting Off Holders（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 2,095,531 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKN Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)

  KYOCERA

  KTKTBF type blade holding tool block from Tsukkiru.[Compatible Blade]KTKB/KFTB32

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 5,306,925 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDMS Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 218,670 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,144,221 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 987,210 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model

  KYOCERA

  There is a limit to the groove depth that can be processed depending on the workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 237,696 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.For outer diameter grooving and face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.For outer diameter relief cut grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type

  KYOCERA

  [Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.A right angle type.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,063,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip

  KYOCERA

  [Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 322,256 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting System Bar, Model VNG

  KYOCERA

  Solid type system bar.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 968,483 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)

  KYOCERA

  Inner diameter grooving SIGE model for automatic lathes.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 12,557,850 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)

  KYOCERA

  GIV model tip for small diameter grroving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 341,283 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,954,541 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 11,584,130 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip

  KYOCERA

  Clamp-on type large inner diameter deep grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 322,256 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 798,760 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  · T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 798,760 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)

  KYOCERA

  T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 2,509,880 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS Type

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 5(6)	-	Right-hand / Left-hand	30 ～ ∞	-	20 ～ 25

  From: 5,120,281 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS-8 Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,493,195 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder Compatible Tip

  KYOCERA

  Takinor multi-functional / end face grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 324,188 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KFTB-S Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,830,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,368,890 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip KGD Type (for Automatic Plate)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGDR/L1212JX-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,898,945 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,750,590 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKR/L Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-SS Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 3,007,286 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Block for Holding Blade, KTKTB Type (Split Type)

  KYOCERA

  [Features]A split tool block for holding a Kyocera's blade.[Applications]For fixing blades.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 6,052,753 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder GVF

  KYOCERA

  A clamp-on holder for face grooving.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder KGD-S

  KYOCERA

  [Features]· KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.[Applications]· Holder for Grooving and Cutting Off

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	-	-	-	-

  From: 3,750,590 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Mill Routing Tip Holder

  KYOCERA

  [Features]· SIGE-WH type.[Applications]· Inner Diameter Groove Holder

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	-	-	-	-

  From: 10,638,295 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder KFMS

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.For multi-function, face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 5,493,195 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, SF Type

  KYOCERA

  [Features]·SF type [Applications] Flange grooving holder, GFVS / GFVT type flange grooving blade

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 1,285,213 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, KFMS Type

  KYOCERA

  [Features]·KFMS type: It is a multi-functional tool. [Applications]·Multi-functional, flange grooving holder

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 5,493,195 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Mill Routing Holder Blade

  KYOCERA

  This product can be used for various groove diameters by changing blades.For face grooving holders.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 1,285,213 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (for GVF Chip) GFV Type

  KYOCERA

  A clamp-on holder for face grooving.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	4.6 ～ 8.1	Right-hand / Left-hand	50（∞） ～ 250（∞）	-	-

  From: 4,788,800 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder Main Body (for GVF Chip)

  KYOCERA

  A clamp-on holder for face grooving.Modular (blade).

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	Right-hand / Left-hand	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (for GVF Chip) GFVS Type

  KYOCERA

  [Features]· Blade exchange enables this holder to support various groove diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	5.1(4.6) ～ 8.1(8.1)	Right-hand / Left-hand	50（∞） ～ 250（∞）	-	-

  From: 5,803,958 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)	Cutter Holder TKN Type	Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type	Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip	Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)	Small Bore Slotting System Bar, Model VNG	Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)	Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)	Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type	Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8	Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip	Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)	Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)	Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)	Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)	Multi-Functional / End Face Grooving Holder KFMS Type	Multi-Functional / End Face Grooving Holder KFMS-8 Type	Multi-Functional / End Face Grooving Holder Compatible Tip	Grooved End Face Blade KFTB-S Type	Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type	Slit Tip KGD Type (for Automatic Plate)	Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)	Cutter Holder TKR/L Type	Punching Blade KTKB-SS Type	Tool Block for Holding Blade, KTKTB Type (Split Type)	Grooving Holder GVF	Grooving Holder KGD-S	Kyocera Mill Routing Tip Holder	Grooving Holder KFMS	Kyocera, Grooving Holder, SF Type	Kyocera, Grooving Holder, KFMS Type	Kyocera Mill Routing Holder Blade	Grooved End Face Holder (for GVF Chip) GFV Type	Grooved End Face Holder Main Body (for GVF Chip)	Grooved End Face Holder (for GVF Chip) GFVS Type
From	2,095,531 VND-	239,388 VND-	5,306,925 VND	3,193,558 VND-	218,670 VND-	4,144,221 VND-	987,210 VND-	237,696 VND-	3,918,668 VND	3,918,668 VND	3,566,470 VND-	4,063,690 VND-	3,566,470 VND-	322,256 VND-	3,918,668 VND	968,483 VND-	12,557,850 VND	341,283 VND-	4,954,541 VND-	11,584,130 VND-	322,256 VND-	798,760 VND-	4,560,910 VND-	798,760 VND	2,509,880 VND-	5,120,281 VND-	5,493,195 VND-	324,188 VND-	4,830,236 VND	5,368,890 VND-	2,898,945 VND-	3,750,590 VND-	239,388 VND-	3,007,286 VND-	6,052,753 VND-	4,560,910 VND-	3,750,590 VND-	10,638,295 VND	5,493,195 VND	1,285,213 VND	5,493,195 VND	1,285,213 VND	4,788,800 VND-	4,560,910 VND-	5,803,958 VND-
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	10 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	9 Day(s) or more	10 Day(s) or more	6 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	-	-	-	-	-	-	-	-	Edge surface grooving	Cutting off	Inner Diameter Grooving	Edge surface grooving	Edge surface grooving	Edge surface grooving	Edge surface grooving	Edge surface grooving	Edge surface grooving	Edge surface grooving
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	3 ～ 5(6)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4.6 ～ 8.1	-	5.1(4.6) ～ 8.1(8.1)
Selfishly	Left-hand	-	-	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Left-hand	Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	-	-	-	-	-	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ ∞	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50（∞） ～ 250（∞）	-	50（∞） ～ 250（∞）
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…