(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
8 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12.1 | 3 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.· Blade diameter tolerance is unique at +0.005/0(J5).
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 19.9 | 7 ~ 110 | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank / straight shank | NA | Straight | NA | - | - | - | - |
From: 524,060 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 10.009 | 5 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.05 | 20 ~ 85 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 592,519 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features] · Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.985 ~ 10.025 | 12 ~ 24 | Stainless Steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 1,962,348 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.9 ~ 14 | 20 ~ 70 | general steel[○] / Resin[○] / Alloy Steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: 958,417 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.91 ~ 12.1 | 20 ~ 25 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Chucking Reamer
FPTOOLS
[Features]Chucking reamer that widens hole while rotating workpiece during cutting.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14 | 20 ~ 50 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: 1,725,033 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS |
Product SeriesDòng sản phẩm | ||||||||
From | 519,142 VND- | 524,060 VND Special Price On Sale Till 31/03/2025 | 1,247,050 VND- | 592,519 VND- | 1,962,348 VND- | 958,417 VND- | 722,944 VND- | 1,725,033 VND- |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Tool Diameter(mm) | 0.2 ~ 12.1 | 0.3 ~ 19.9 | 0.5 ~ 10.009 | 1 ~ 14.05 | 2.985 ~ 10.025 | 0.9 ~ 14 | 2.91 ~ 12.1 | 1 ~ 14 |
Groove Length(mm) | 3 ~ 45 | 7 ~ 110 | 5 ~ 40 | 20 ~ 85 | 12 ~ 24 | 20 ~ 70 | 20 ~ 25 | 20 ~ 50 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | Stainless Steel[○] | general steel[○] / Resin[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] |
Shank Type | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank |
Coating Y/N | NA | NA | NA | Available | NA | NA | NA | NA |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - |
radius R | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy