Screwdrivers（Shaft type：Round Page7）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver DA-48 – 52

  ENGINEER

  Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.[Features]· Uses tough zirconia-based fine ceramic bit.· For high frequency area adjustment with complete non-inductive properties.· Also ideal as a short-circuit prevention screwdriver for board protection.· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)· Pencil-type portable design with caps for protecting tip.[Applications]· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.· For work related to wireless devices, computers and communications.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-) / Phillips (+)/Flathead(-)	Other	0.8 ～ 2.5	-	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 662,217 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustable Screwdriver (With Rotating Cap)

  ENGINEER

  Ideal for trimmer adjustment in a compact design ceramic adjustment screwdriver line.[Features]・ A high strength, long lifespan, completely non-induction high frequency adjustment screwdriver using zirconia fine-ceramics.・ Two types of adjustments are possible with the straight-slot tip and the hexagonal shaft core.・ The handle has a compact design and a rotating cap that is easy to use[Applications]・ Adjustment work of variable coil, IFT, trimmer

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	Other	0.9 ～ 2.5	15 ～ 18	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 287,031 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver Set DK-90

  ENGINEER

  Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.[Features]· Uses tough zirconia-based fine ceramic bit.· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).· Pencil-type portable design with caps for protecting tip.· 4 piece set of DA-48 and 50 to 52.[Applications]· For audio equipment such as tuners and amplifiers.· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	Other	0.8 ～ 2.5	-	Set Product	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 2,192,627 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Master Grip Screwdriver DG-08/DG-09

  ENGINEER

  A screwdriver featuring a master cushioning grip that generates powerful tightening torque.[Features]· In addition to being color-coded for Phillips/flathead, the grip end is also shaped differently as a design element.· The shaft is chrome-vanadium steel.· The tip has been black-point processed.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	6	70	Single Item	Round	Available	NA	NA	Rubber	1	-	-

  From: 193,861 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Soft Screwdriver Set

  ENGINEER

  A mini soft screwdriver set with a soft grip which fits well in the hand.[Features]· It is a soft grip which fits well in the hand.· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.· The tip has been black-point processed.· It has a chrome plated finish.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.0	3 ～ 4	80	Set Product	Round	NA	NA	NA	Rubber	0.4 ～ 0.5	-	-

  From: 554,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Precision Special Screws DAP-01/DAP-02

  ENGINEER

  A compact design screwdriver for precision special screws.[Features]· The grip part has a rotating cap.· Uses anti-slip knurling.· DAP-01: For adjustment work of star-shaped screws (pentalobular screws).· DAP-01: For smartphone strap attachment and repair.[Applications]· DAP-01: Ideal for accessory replacement of smartphones.· DAT-02: Ideal for repair and maintenance of portable game machines.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	23	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 279,928 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver For Special Screw and For Hexalobular Screw

  ENGINEER

  A screwdriver that supports all types of special screw for mobile phones, PHS, radio sets, PC, home game machines, etc.[Features]· There is a protrusion at the center of the screw hole, making it suitable for tampering and theft prevention.· It is widely used in cordless telephones / radios / precision instruments, etc.[Applications]· For the maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75 ～ 100	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 254,411 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)

  ENGINEER

  It supports special screws used in mobile phones, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 307,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set for Special Screw

  ENGINEER

  Screwdriver bit series that is compatible with various special screws.[Features]・ Selectable according to screw shape and application[Applications]・ Mobile phones, hard disks, toys, small radio-controlled models, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	-	Single Item	Round	Available	-	-	-	-	-	-

  From: 200,546 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Special Screw Bit Set DR-18

  ENGINEER

  Special screw bit set for the screwdriver bit series that is compatible with various special screws.[Features]・ A 10-piece set of DR-81 to 93・ With a bit holder[Applications]・ For all maintenance of mobile phones, PHS, wireless devices, PCs, home game machines, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	Round	Available	-	-	-	-	-	-

  From: 1,846,269 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Piercing Screwdriver

  TONE

  Standard type screwdriver with a wooden handle.[Features]· Standard type screwdriver with a wooden handle with a sense of warmth.· Through screwdriver.[Applications]· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	4.5 ～ 9	50 ～ 200	Single Item	Round	NA	Available	NA	Wooden handle	0.6 ～ 1.1	-	-

  From: 161,621 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shaft Screwdriver LD

  TONE

  An ideal screwdriver for working in places that conventional screwdrivers cannot reach.[Features]· Long shaft screwdriver with a total length of 395 mm.· Round shaft type with 267 mm shaft length. With magnet.· Flathead tip -0.8 x 6.0 mm.· Phillips tip +No.2 mm.[Applications]· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	267	Single Item	Round	Available	NA	NA	Resin	0.8	-	-

  From: 334,630 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shaft Screwdriver Set LD2

  TONE

  2-piece long shaft screwdriver set with an overall length of 395 mm.[Features]· For work which can't be reached using a conventional driver.· Length: 395 mm, shaft length: 267 mm. Round shaft type with magnet.· Flathead tip -0.8 x 6.0.· Phillips tip +No.2.[Applications]· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	267	Set Product	Round	Available	NA	NA	Resin	0.8	-	-

  From: 579,929 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Screwdriver D-130 – D-155

  HOZAN

  A shaft one size smaller than general screwdrivers is used, so it is optimal for screws in deep places often seen in home appliances.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.0	-	100	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 69,356 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Screwdriver D-66/D-67

  HOZAN

  A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.[Features]· Size that is easy to use even in narrow locations. For small screws that do not require force.· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.· The size and price allow placement where adjustment is necessary.[Applications]· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00	1.8	23	Single Item	Round	NA	NA	NA	Resin	0.3	-	-

  From: 25,500 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Nut Screwdriver D-840

  HOZAN

  A convenient nut driver (box driver) handy for quick turning of nuts and bolts.[Features]· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.· Black oxide processing forms an oxidation film during rustproofing treatment.[Applications]· Ideal for small nuts for hobby use.· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box	-	-	100 ～ 125	Single Item	Round	NA	NA	NA	Resin	-	4 ～ 10	-

  From: 164,371 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver with Anti-Drop Ring

  ANEX

  The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 331,505 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver (Incorporating Magnet)

  ANEX

  Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	135	Set Product	Round	Available	-	Included	Resin	-	-	-

  From: 358,535 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Impact Screwdriver Set

  ANEX

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1 / No.2	-	-	Set Product	Round	NA	-	-	Rubber	-	-	-

  From: 534,600 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  L-Driver

  HIRAI KOGU

  It is bent 20 mm under the neck, so final tightening is possible at corner angles where regular screwdrivers cannot reach or in narrow places with obstacles. The shaft has undergone black point processing over the whole length.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1 / No.2	-	100	Single Item	Round	Available	NA	NA	Resin	-	-	-

  From: 106,080 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set, TD-S

  TRUSCO NAKAYAMA

  Standard type set of frequently-used drivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.0 / No.1 / No.2	1.8 ～ 6	-	Set Product	Round	NA	NA	NA	Resin	-	-	-

  From: 180,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic handle screwdriver (with magnet)

  TRUSCO NAKAYAMA

  The bottom of the grip is a ball type, making it easier to turn the screw.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	4.5 ～ 8	50 ～ 250	Single Item	Round	Available	NA	NA	Resin	-	-	-

  From: 61,667 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Wooden handle screwdriver (with magnet)

  TRUSCO NAKAYAMA

  Special rust-resistant plating is applied.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3 / No.4	4.5 ～ 9	50 ～ 200	Single Item	Round	Available	NA	NA	Wooden handle	-	-	-

  From: 94,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wooden handle through screwdriver (with magnet)

  TRUSCO NAKAYAMA

  Special rust-resistant plating is applied.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3 / No.4	4.5 ～ 9	50 ～ 200	Single Item	Round	Available	Available	NA	Wooden handle	-	-	-

  From: 121,126 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form Screwdriver Set

  WERA

  A set of 7 screwdrivers with handles that realize ergonomics.[Features]・ It allows you to tighten screws straight.・ A handle designed to make it easier to apply torque in line with ergonomics.・ The tip of the handle has a hexagonal shape to prevent it from rolling around.・ The laser tip at the tip makes it easy to bite into the screw.・ The special grip shape realizes ease of grip and fit.・ White carton specifications.・ Manufacturing country: Czech.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6 ～ 8	-	Set Product	Round	NA	NA	NA	Rubber	-	8 ～ 10	-

  From: 3,661,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Screwdriver Set - 12 pcs

  WERA

  12-piece set of micro screwdrivers.[Features]・ Uses an ergonomic handle that is ergonomically easy to hold, easy to rotate, and reliably transmits torque.・ It allows you to tighten screws straight.・ With a zone that can rotate quickly.・ With the aim (hexagonal) for precise adjustment.・ Designed to transmit stronger torque with your fingers.・ With a sturdy pouch.・ Manufacturing country: Czech.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.0	1.5 ～ 3	-	Set Product	Round	NA	NA	NA	Rubber	-	0.9 ～ 2	-

  From: 3,026,308 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form Compact VARIO

  WERA

  Combination blade that can be used at both ends.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-) / Phillips (+)/Flathead(-) / Torx / Hexagon	No.1 / No.2 / No.3	4 ～ 7	-	Single Item	Round	NA	-	-	-	-	3 ～ 6	-

  From: 513,181 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form, Compact 27RA Set

  WERA

  Body center part opens when tail part is pushed, then bits inside can be replaced for use.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	5.5 ～ 6.5	-	Set Product	Round	NA	-	-	Rubber	-	6	-

  From: 2,948,400 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Nut Screwdriver

  WERA

  The shaft section is flexible, so it's suitable for work in tight spaces.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box	-	-	167	Single Item	Round	NA	NA	NA	Rubber	-	6 ～ 8	-

  From: 1,112,400 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ballpoint Hexagon Screwdriver

  WERA

  As the tip has a ballpoint specification, hex socket head cap bolts, and so on, can be turned even if the screwdriver is inclined slightly at an angle. Special grip design provides an easy grip and comfortable fit.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	60 ～ 150	Single Item	Round	NA	NA	NA	Rubber	-	1.5 ～ 12	-

  From: 316,800 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Torx® HF Driver

  WERA

  Special grip design provides an easy grip and comfortable fit. Wera's proprietary Torx® HF shape fits Torx® screws perfectly.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	300	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 787,058 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Through Flathead Screwdriver

  SIGNET

  [Features]· Easy to grip ergonomic handle reduces fatigue.· With base hexagon, a wrench can be applied for rotation.· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	5.5 ～ 8	75 ～ 150	Single Item	Round	NA	Available	NA	Resin	0.75 ～ 1.1	-	-

  From: 331,611 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Line Color Screwdriver (SMATO)

  SMATO

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	-	Single Item	Round	-	-	-	Resin	-	-	-

  From: 360,745 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Grip Screw Driver (SD Series)

  SMATO

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	100 ～ 200	Single Item	Round	-	-	-	Rubber	-	-	-

  From: 396,944 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  O-ring Puller & Driver SET

  KFT OPT

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	-	Set Product	Round	-	-	-	Resin	-	-	-

  From: 657,703 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  LED Electrical Screwdriver D-745

  HOZAN

  An LED type inspection screwdriver with high visibility.[Features]· Batteries can be changed.· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.· Handle diameter 16 mm, weight 23 g.· Be sure to check the light before use.· Be careful of short circuit and electric shock.[Applications]· Used for determining AC polarity and checking electrical conductance.· Can be used within the applicable range.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	2.5	17	Single Item	Round	NA	NA	NA	Resin	0.6	-	-

  From: 252,491 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Watch Band Replacement

  ANEX

  [Features]· Ideal for removing watch strap spring bars (tongues).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	-	Single Item	Round	-	-	-	-	-	-	-

  From: 181,616 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Stubby Ratchet Screwdriver

  ANEX

  [Features]· Rotates smoothly, with excellent workability.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	30	-	Single Item	Round	NA	NA	NA	Resin	6	-	-

  From: 303,993 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electrician's 2-way Screwdriver

  SMATO

  [Features]· Screwdriver with both Phillips and flathead bits attached

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	75~150	Single Item	Round	NA	-	-	Resin	-	-	-

  From: 462,022 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Ratchet Screwdriver Replacement Shaft 2200B-2-150

  VESSEL

  Replacement shaft with ball grip screwdriver and ratchet mechanism.[Features]・ Replacement shaft for 36-gear ball ratchet screwdriver with light rotation・ The shaft is made of bit material, and the whole body is hardened・ It can be replaced by pulling out the ball part of No.2200・ You can pull out the ball part of the ball ratchet screwdriver and replace it・ Ratchet with a safety structure that does not expose the metal part・ Slim shaft cover[Applications]・ Terminal blocks, power distribution boards, telephones, air conditioning, reforms, etc.・ All screw tightening work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	150	Single Item	Round	-	NA	-	-	-	-	-

  From: 90,900 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Ratchet Screwdriver Replacement Shaft 2200B-3-150

  VESSEL

  A replacement shaft for ball grip drivers with a built-in ratchet mechanism.[Features]· A replacement shaft for ball ratchet driver that has 36-tooth gears for light maneuverability.· Shaft uses bit material and is fully quenched.· Replace by removing the ball part of the ball ratchet driver.· Ratchet safety structure does not expose the metal portions.· A slim shaft cover.[Applications]· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.3	-	150	Single Item	Round	-	NA	-	-	-	-	-

  From: 119,684 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver-Type Handle (Spin Handle)

  MITOLOY

  [Features]· This is a grip shape that makes it hard to slip. [Applications]· This is for tightening and loosening bolts and nuts at work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	66	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 400,383 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Socket Screwdriver 167M

  KO-KEN TOOL

  [Features]·Grip materials: Soft resin/rubber·Cutting edge magnet: N/A

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box	-	-	125	Single Item	Round	NA	NA	NA	Rubber	-	3 ～ 14	-

  From: 328,351 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Torx Screwdriver (Anti-Tamper) 168T(TH)

  KO-KEN TOOL

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	80 ～ 125	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 337,445 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Socket 3/8" (9.5 mm) Offset Spin Type Handle 3769NWF-160

  KO-KEN TOOL

  This product can be used in 2 ways. By inserting the socket lightly until you hear a clicking sound, you can make the head rotate flexibly up to 15 degrees in vertical and horizontal directions, and by inserting it further, you can make it move linearly in the same way as the conventional spin-type handles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	Other	-	50 ～ 120	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 651,243 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	TONE	TONE	TONE	HOZAN	HOZAN	HOZAN	ANEX	ANEX	ANEX	HIRAI KOGU	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	WERA	WERA	WERA	WERA	WERA	WERA	WERA	SIGNET	SMATO	SMATO	KFT OPT	HOZAN	ANEX	ANEX	SMATO	VESSEL	VESSEL	MITOLOY	KO-KEN TOOL	KO-KEN TOOL	KO-KEN TOOL
Product SeriesDòng sản phẩm	Ceramic Adjustment Screwdriver DA-48 – 52	Ceramic Adjustable Screwdriver (With Rotating Cap)	Ceramic Adjustment Screwdriver Set DK-90	Master Grip Screwdriver DG-08/DG-09	Mini Soft Screwdriver Set	Screwdriver for Precision Special Screws DAP-01/DAP-02	Screwdriver For Special Screw and For Hexalobular Screw	Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)	Screwdriver Set for Special Screw	Special Screw Bit Set DR-18	Piercing Screwdriver	Long Shaft Screwdriver LD	Long Shaft Screwdriver Set LD2	Phillips Screwdriver D-130 – D-155	Micro Screwdriver D-66/D-67	Nut Screwdriver D-840	Screwdriver with Anti-Drop Ring	Replacement Screwdriver (Incorporating Magnet)	Impact Screwdriver Set	L-Driver	Screwdriver Set, TD-S	Plastic handle screwdriver (with magnet)	Wooden handle screwdriver (with magnet)	Wooden handle through screwdriver (with magnet)	Craft Form Screwdriver Set	Micro Screwdriver Set - 12 pcs	Craft Form Compact VARIO	Craft Form, Compact 27RA Set	Flexible Nut Screwdriver	Ballpoint Hexagon Screwdriver	Long Torx® HF Driver	Through Flathead Screwdriver	Line Color Screwdriver (SMATO)	Ball Grip Screw Driver (SD Series)	O-ring Puller & Driver SET	LED Electrical Screwdriver D-745	Watch Band Replacement	Replacement Stubby Ratchet Screwdriver	Electrician's 2-way Screwdriver	Ball Ratchet Screwdriver Replacement Shaft 2200B-2-150	Ball Ratchet Screwdriver Replacement Shaft 2200B-3-150	Screwdriver-Type Handle (Spin Handle)	Screwdriver Socket Screwdriver 167M	Screwdriver Torx Screwdriver (Anti-Tamper) 168T(TH)	Hand Socket 3/8" (9.5 mm) Offset Spin Type Handle 3769NWF-160
From	662,217 VND	287,031 VND	2,192,627 VND	193,861 VND	554,006 VND	279,928 VND	254,411 VND	307,085 VND	200,546 VND	1,846,269 VND	161,621 VND	334,630 VND	579,929 VND	69,356 VND	25,500 VND	164,371 VND	331,505 VND	358,535 VND	534,600 VND	106,080 VND	180,000 VND	61,667 VND	94,000 VND	121,126 VND	3,661,200 VND	3,026,308 VND	513,181 VND	2,948,400 VND	1,112,400 VND	316,800 VND	787,058 VND	331,611 VND	360,745 VND	396,944 VND	657,703 VND	252,491 VND	181,616 VND	303,993 VND	462,022 VND	90,900 VND	119,684 VND	400,383 VND	328,351 VND	337,445 VND	651,243 VND
Days to ShipSố ngày giao hàng	9 Day(s)	9 Day(s)	12 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	Same day or more	Same day	9 Day(s)	Same day or more	9 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s)	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	4 Day(s)	4 Day(s)	4 Day(s)	4 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	8 Day(s) or more	9 Day(s) or more	9 Day(s)
Tip standards	Flathead (-) / Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Flathead (-)	Phillips (+)/Flathead(-)	Torx / Other	Torx	Torx	Torx / Other	Combination	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)	Phillips (+) / Flathead (-)	Box	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)	Phillips (+)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Combination	Combination	Flathead (-) / Phillips (+)/Flathead(-) / Torx / Hexagon	Combination	Box	Ballpoint	Torx	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Other	Flathead (-)	Other	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Phillips (+)	Phillips (+)	Other	Box	Torx	Other
Tip size / Phillips (+)	Other	Other	Other	-	No.00 / No.0	-	-	-	-	-	No.1 / No.2 / No.3	No.2	No.2	No.0	No.00	-	No.2	No.2	No.1 / No.2	No.1 / No.2	No.0 / No.1 / No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3 / No.4	No.1 / No.2 / No.3 / No.4	No.1 / No.2 / No.3	No.00 / No.0	No.1 / No.2 / No.3	No.1 / No.2	-	-	-	-	-	-	-	-	-	No.2	No.2	No.2	No.3	-	-	-	Other
Tip size / flathead (-) blade width (mm) B1	0.8 ～ 2.5	0.9 ～ 2.5	0.8 ～ 2.5	6	3 ～ 4	-	-	-	-	-	4.5 ～ 9	6	6	-	1.8	-	6	6	-	-	1.8 ～ 6	4.5 ～ 8	4.5 ～ 9	4.5 ～ 9	6 ～ 8	1.5 ～ 3	4 ～ 7	5.5 ～ 6.5	-	-	-	5.5 ～ 8	-	-	-	2.5	-	30	6	-	-	-	-	-	-
Shaft length L (mm)	-	15 ～ 18	-	70	80	23	75 ～ 100	75	-	-	50 ～ 200	267	267	100	23	100 ～ 125	100 ～ 150	135	-	100	-	50 ～ 250	50 ～ 200	50 ～ 200	-	-	-	-	167	60 ～ 150	300	75 ～ 150	-	100 ～ 200	-	17	-	-	75~150	150	150	66	125	80 ～ 125	50 ～ 120
Single Product/Set Classification	Single Item	Single Item	Set Product	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Set Product	Set Product	Single Item	Set Product	Single Item	Single Item	Single Item	Set Product	Set Product	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item
Shaft type	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round
Magnet	NA	NA	NA	Available	NA	NA	NA	NA	Available	Available	NA	Available	Available	NA	NA	NA	NA	Available	NA	Available	NA	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	NA	-	NA	NA	-	-	NA	NA	NA	NA
Shaft through	NA	NA	NA	NA	NA	NA	NA	NA	-	-	Available	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	Available	NA	NA	-	-	NA	NA	NA	Available	-	-	-	NA	-	NA	-	NA	NA	NA	NA	NA	NA
Bolster	NA	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	NA	NA	NA	Included	-	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	-	-	-	NA	-	NA	-	-	-	NA	NA	NA	NA
Grip Type	Resin	Resin	Resin	Rubber	Rubber	Rubber	Resin	Resin	-	-	Wooden handle	Resin	Resin	Rubber	Resin	Resin	Rubber	Resin	Rubber	Resin	Resin	Resin	Wooden handle	Wooden handle	Rubber	Rubber	-	Rubber	Rubber	Rubber	Rubber	Resin	Resin	Rubber	Resin	Resin	-	Resin	Resin	-	-	Resin	Rubber	Rubber	Rubber
Tip size / flathead (-) blade thickness (mm) B2	0.35 ～ 0.7	0.35 ～ 0.7	0.35 ～ 0.7	1	0.4 ～ 0.5	-	-	-	-	-	0.6 ～ 1.1	0.8	0.8	-	0.3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.75 ～ 1.1	-	-	-	0.6	-	6	-	-	-	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4 ～ 10	-	-	-	-	-	-	-	-	8 ～ 10	0.9 ～ 2	3 ～ 6	6	6 ～ 8	1.5 ～ 12	-	-	-	-	-	-	-	-	-	-	-	-	3 ～ 14	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…