Chamfer, V-Grooves（Coating Type：TiAlN）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  V Men-Maru C-MPE-V

  THE CUT

  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,146,513 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (90° Blade)

  NOGA JAPAN

  [Features]·A solid carbide chamfering cutter that can chamfer the back of small holes (minimum cutting edge diameter 1.5 mm).·Perfect for machining.·Can be used for milling, deburring, and back chamfering.·The spiral blade provides a smooth cutting edge.·This is a mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.[Applications]·Work Material: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.·A mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	1.5 ～ 6	90	-	-	-	-	-	TiAlN	-

  From: 1,708,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide is used as the base material, and it is available with a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: 1,681,952 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (Dovetail 45° Blade)

  NOGA JAPAN

  [Features]· Mini chamfer consisting only of back chamfer blade.· Ideal for chamfering undersides of shallow bases.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by back milling drill holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	1.5 ～ 6	45	-	-	-	-	-	TiAlN	-

  From: 1,708,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: 1,213,881 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes)

  NOGA JAPAN

  [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 12	90	-	-	-	-	-	TiAlN	-

  From: 1,737,211 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]· It enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	Available	Available	TiAlN	-

  From: 2,077,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]· No need to turn over the work material. (Also removes through-hole burrs)· Both sides can be chamfered with the one cutter tool.· Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer / Drilling / Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 4,179,611 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: 12,045,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coating FX-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: 7,073,445 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter FX-SCC

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	NA	Available	TiAlN	-

  From: 2,420,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type that can be used for machining deep parts. Since a twisting flute is used, chattering does not occur even if the amount of protrusion is large.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	NA	Available	TiAlN	-

  From: 2,921,398 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	Available	TiAlN	-

  From: 2,076,965 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVMA Chamfering Mill, OK Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	Available	Available	TiAlN	-

  From: 1,926,081 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 120° Chamfering Type N 6714

  GUHRING

  Taper half-angle 60° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	120	-	-	-	-	Available	TiAlN	-

  From: 992,956 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 60° Chamfering Type N 6711

  GUHRING

  Taper half-angle 30° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	60	-	-	-	-	Available	TiAlN	-

  From: 928,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 90° Chamfering Type N 6713

  GUHRING

  Taper half-angle 45° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	90	-	-	-	-	Available	TiAlN	-

  From: 953,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Chamfer (30° Blade) for Oblique Cross Holes

  NOGA JAPAN

  [Features]· For deburring and chamfering of diagonal cross-holes, etc.· The angle of the blade is 150 degrees and the cutting edge is long and wide, so it is effective for deburring oblique cross holes, etc.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· This is a mini chamfer that chamfers and deburrs by milling the burrs on cross holes / diagonal cross holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 8	30	-	-	-	-	-	TiAlN	-

  From: 1,708,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (120° Blade)

  NOGA JAPAN

  [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 2 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	2 ～ 5	120	-	-	-	-	-	TiAlN	-

  From: 1,658,994 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Reach Counterbore Mini Chamfer 90° Blade (For Deep Holes) Total Length 105 mm

  NOGA JAPAN

  [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.· Mini chamfering 90° blade long shank type, overall length: 105 mm[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 8	90	-	-	-	-	-	TiAlN	-

  From: 1,991,940 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	THE CUT	NOGA JAPAN	OSG	MAKOTOLOY	NOGA JAPAN	DIXI	NOGA JAPAN	NS TOOL	MAKOTOLOY	THE CUT	OSG	OSG	OSG	OSG	SANKO MFG	OKAZAKI SEIKO	GUHRING	GUHRING	GUHRING	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY
Product SeriesDòng sản phẩm	V Men-Maru C-MPE-V	Back Seat Mini Chamfer (90° Blade)	2-flute, Corner Rounding Type FX-ECR	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Back Seat Mini Chamfer (Dovetail 45° Blade)	Carbide Solid Chamfering Endmill 3-Flute	Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes)	MUGEN Coating C Chamfer Cutter NSCV-M	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Leading Drill, Carbide FX Coating FX-LDS	2-flute Spiral Chamfering Cutter FX-SCC	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	SAGCCC AS Coated Carbide Center for Chamfering	SVMA Chamfering Mill, OK Coated	Milling Cutter for 120° Chamfering Type N 6714	Milling Cutter for 60° Chamfering Type N 6711	Milling Cutter for 90° Chamfering Type N 6713	Mini Chamfer (30° Blade) for Oblique Cross Holes	Back Seat Mini Chamfer (120° Blade)	Long Reach Counterbore Mini Chamfer 90° Blade (For Deep Holes) Total Length 105 mm	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
From	2,146,513 VND	1,708,270 VND	1,681,952 VND	3,109,123 VND	1,708,270 VND	1,213,881 VND	1,737,211 VND	2,077,788 VND	3,109,123 VND	4,179,611 VND	12,045,050 VND	7,073,445 VND	2,420,240 VND	2,921,398 VND	2,076,965 VND	1,926,081 VND	992,956 VND	928,500 VND	953,996 VND	1,708,270 VND	1,658,994 VND	1,991,940 VND	2,906,958 VND	2,906,958 VND	2,906,958 VND	3,109,123 VND	2,752,725 VND	2,752,725 VND	2,752,725 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Tool Material Type	Carbide	-	Carbide	Carbide	-	Carbide	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 20	1.5 ～ 6	0.5 ～ 1.5	3 ～ 20	1.5 ～ 6	2 ～ 12	3 ～ 12	4 ～ 6	3 ～ 20	2.8 ～ 12	16 ～ 25	16 ～ 25	0.8 ～ 1	0.8 ～ 1	3 ～ 20	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 8	2 ～ 5	4 ～ 8	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9
Tip angle (θ)	60 ～ 120	90	-	90	45	90	90	45°	120	90°	90	90	90	90	-	90 ～ 120	120	60	90	30	120	90	60	90	120	60	60	90	120
Application	Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other	-	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Drilling / Other	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal / V Groove	-	-	-	-	-	-	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling
work material	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	-	-	-	-	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]
Single blade, two blades	Single blade	-	Single blade	Single blade	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	-	-	-	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	-	-	NA	-	-	-	-	Available	-	-	NA	NA	NA	NA	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	Available	-	Available	Available	-	Available	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
R Size (R)(mm)	-	-	0.1 ～ 2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…