Chamfer, V-Grooves（Single blade, two blades：Single blade Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: 1,728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	Available	Available	TiCN	-

  From: 718,971 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center chamfer mill

  FUKUDA

  A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 40	60 ～ 120	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: 1,291,831 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chatterless chamfer milling machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	60 ～ 120	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 678,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center reamer (taper shank)

  FUKUDA

  A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 5,268,578 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,275,516 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Samurai

  FUJIGEN

  [Features]· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.· Achieves high runout accuracy within 5/1,000 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 10	90	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,714,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Angular Cutter With TAG Handle G2

  ASAHI TOOLS

  Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table groove

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	15 ～ 100	45° ～ 60°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Single blade	Available	NA	Non-Coated	-

  From: 4,455,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Brazing shape, angle tolerance ±15'.Maintaining shape accuracy with a straight cutting edge.Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/ResinSingle-edge blade2 blades

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10 ～ 60	60 ～ 90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: 3,140,566 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

  OKAZAKI SEIKO

  [Features]・ Three-Flute Type・ For steel, stainless steel· All products are TiN coated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 30	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 2,069,017 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid V point mill VSE VSESS type

  DIJET

  It is a tool with excellent abrasion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Chamfering/Horizontal / V Groove / Drilling / Other	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	-	NA	Non-Coated	-

  From: 1,769,716 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Mentatsu aluminum AL-VME

  DIJET

  A tool with excellent abrasion resistance.Work material, AluminumSingle-edge bladeTool grade, CarbideTip angle (θ) 90

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Chamfering/Horizontal	Aluminum[◎]	Single blade	-	NA	Non-Coated	-

  From: 1,492,018 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Mentatsu aluminum (long shank) AL-VME-LS

  DIJET

  A tool with excellent abrasion resistance.Work Material, Aluminum, Single EdgeTool grade, CarbideTip angle (θ) 90

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Chamfering/Horizontal	Aluminum[◎]	Single blade	-	NA	Non-Coated	-

  From: 1,804,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMC-4

  KYOWA SEIKO

  4 straight flutes.45° (single angle type)Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/AluminumSingle-edge bladeTool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMW-4

  KYOWA SEIKO

  4 straight flutes.90° (included angle type)Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/ResinSingle-edge bladeTool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	-	NA	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Tool CFT (SKH57)

  TAIYO-TOOL

  [Applications]・ Hole chamfer・ [Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated[Number of flutes]・ 1-flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 20	60 ～ 90	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: 2,867,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner Round Cutter MCRC (SKH56)

  TAIYO-TOOL

  [Applications]・ Round chamfering[Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated[Number of flutes]・ 2-flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	2.6 ～ 23	-	Round Chamfer	-	Single blade	-	NA	Non-Coated	0.3 ～ 10

  From: 2,121,713 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

  TAIYO-TOOL

  [Applications]・ Hole chamfer[Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	25 ～ 55	-	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: 4,454,820 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  High performance end mill with high versatility[Features]·One end mill for all work materials·Improved machine operating rate·Minimize tool inventory·Safe and predictable tool life·High flexibility and optimized tooling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6 ～ 12	90°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	Other	-

  From: 2,185,571 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  OptiMill® Chamfering Mill (4 Flutes)

  MAPAL

  [Features]· Dedicated for chamfering.· The 4-flute specification emphasizes efficiency.· No flat part at the tip.[Applications]· Work materials: Carbon steel, alloy steel, stainless steel, cast iron, light alloy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	Center Hole Angle: 90°	-	-	Single blade	-	Available	Other	-

  From: 1,286,546 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Reamer (3-Flute) MC

  DAIICHITOOL

  [Features]Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	8 ～ 46	60° ～ 90°	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	-	-	-

  From: 1,022,505 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Reamer CF

  DAIICHITOOL

  [Features]A center reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 50	60° ～ 90°	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	-	-	-

  From: 648,495 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, Long Shank TIN-LS-NC-LDS

  OSG

  [Specifications]· Tip angle tolerance is 90° ±1°.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	12	90	-	-	Single blade	Available	Available	TiN	-

  From: 3,129,368 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

  OSG

  [Features]・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.・ The return and burr are drastically reduced・ Excellent cutting chip discharge

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	90°	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	Available	-	-

  From: 2,640,916 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]· It enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	Available	Available	TiAlN	-

  From: 2,077,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C Chamfering Cutter NSCV

  NS TOOL

  [Features]· It allows easy chamfer edge machining.[Part Number: NSCV-4]cutting diameter (D) (mm): 4Blade length (mm): 2Shank diameter (d) (mm): 4Overall length (mm): 60Minimum order quantity: 1 pc.[Part Number: NSCV-6]cutting diameter (D) (mm): 6Blade length (mm): 3Shank diameter (d) (mm): 6Overall length (mm): 70Minimum order quantity: 1 pc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	Aluminum[◎] / Copper[◎] / Resin[◎]	Single blade	Available	NA	-	-

  From: 2,448,000 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time・ Standard type

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	DIJET	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	TAIYO-TOOL	TAIYO-TOOL	TAIYO-TOOL	SANDVIK	MAPAL	DAIICHITOOL	DAIICHITOOL	OSG	OSG	NS TOOL	NS TOOL	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY
Product SeriesDòng sản phẩm	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Center chamfer mill	Chatterless chamfer milling machine	Center reamer (taper shank)	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Toglon Sharp SP 60° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	Aluminum Samurai	Angular Cutter With TAG Handle G2	CMC MC Chamfering Cutter G2	CS3S Type III Chamfering Cutter (3-Flute), Straight Shank	Solid V point mill VSE VSESS type	For Mentatsu aluminum AL-VME	For Mentatsu aluminum (long shank) AL-VME-LS	Carbide Inversed Chamfering Cutter KUMC-4	Carbide Inversed Chamfering Cutter KUMW-4	Chamfering Tool CFT (SKH57)	Mini Corner Round Cutter MCRC (SKH56)	Outside Chamfering Cutter (Nice Guy) NGC (SKH51)	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	OptiMill® Chamfering Mill (4 Flutes)	Chamfering Reamer (3-Flute) MC	Center Reamer CF	TiN Coating, Long Shank TIN-LS-NC-LDS	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N	MUGEN Coating C Chamfer Cutter NSCV-M	C Chamfering Cutter NSCV	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
CADCAD
From	2,525,376 VND	1,728,333 VND	718,971 VND	1,291,831 VND	678,775 VND	5,268,578 VND	1,544,838 VND	2,451,912 VND	1,275,516 VND	1,544,838 VND	2,451,912 VND	2,149,554 VND	1,937,884 VND	2,714,526 VND	4,455,326 VND	3,140,566 VND	2,069,017 VND	1,769,716 VND	1,492,018 VND	1,804,711 VND	2,327,389 VND	2,327,389 VND	2,867,541 VND	2,121,713 VND	4,454,820 VND	2,185,571 VND	1,286,546 VND	1,022,505 VND	648,495 VND	3,129,368 VND	2,640,916 VND	2,077,788 VND	2,448,000 VND	2,168,698 VND	2,168,698 VND	2,906,958 VND	2,906,958 VND	2,906,958 VND	2,601,146 VND	2,601,146 VND	2,601,146 VND	3,109,123 VND	3,109,123 VND	3,109,123 VND	2,370,248 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	17 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Tool Material Type	Carbide	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	Carbide	-	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	1 ～ 2	-	3 ～ 25	4 ～ 40	-	-	1.2 ～ 16	2 ～ 16	1.2 ～ 16	3 ～ 12	3 ～ 12	0.6 ～ 4	0.1 ～ 1.5	4 ～ 10	15 ～ 100	10 ～ 60	10 ～ 30	3 ～ 20	3 ～ 10	3 ～ 10	-	-	10 ～ 20	2.6 ～ 23	25 ～ 55	6 ～ 12	-	8 ～ 46	6 ～ 50	12	-	4 ～ 6	4 ～ 6	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.3 ～ 0.9
Tip angle (θ)	90	-	90	60 ～ 120	60 ～ 120	60 ～ 90	60	60	90	90	90	60	90	90	45° ～ 60°	60 ～ 90	90	60 ～ 120	90	90	-	-	60 ～ 90	-	-	90°	Center Hole Angle: 90°	60° ～ 90°	60° ～ 90°	90	90°	45°	45°	60	120	60	90	120	60	90	120	60	90	120	60
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer	Chamfering/Horizontal / V Groove / Drilling / Other	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Hole Chamfer	Round Chamfer	Hole Chamfer	Chamfering/Horizontal	-	Chamfering/Horizontal	Centering (Positioning)	-	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal
work material	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	Aluminum[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	-	-	-	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	NA	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	-	-	-	-	-	-	-	-	NA	-	Available	Available	Available	NA	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	NA	Available	Available	NA	NA	NA	NA	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	-	-	Available	Available	Available	NA	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	Available	NA
Coating Type	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	-	DLC	-	-	DLC	Other	ALT	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	-	-	Non-Coated	Non-Coated	Non-Coated	Other	Other	-	-	TiN	-	TiAlN	-	-	-	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN	TiAlN	TiAlN	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.3 ～ 10	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…