Chamfer, V-Grooves（work material：Stainless Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables faster and longer lifespan than NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	Stainless Steel[◎]	Single blade	NA	Available	TiN	-

  From: 426,667 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 935,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Leading Drill VP-LDS

  OSG

  V coating allows longer lifespan than TIN-NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiCN	-

  From: 471,340 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 1,227,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVM Chamfering Mill, Non-Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	NA	Non-Coated	-

  From: 1,549,166 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	-	-

  From: 1,373,122 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  V Men-Maru C-MPE-V

  THE CUT

  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other	Stainless Steel[○]	Single blade	-	Available	TiAlN	-

  From: 2,146,513 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	Stainless Steel[◎]	Single blade	-	NA	-	-

  From: 905,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]·Ideal for chamfering and V-groove·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 1,763,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 2,000,567 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  High performance end mill with high versatility[Features]·One end mill for all work materials·Improved machine operating rate·Minimize tool inventory·Safe and predictable tool life·High flexibility and optimized tooling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6 ～ 12	90°	Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	Other	-

  From: 2,185,571 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 1,222,151 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model

  MISUMI

  The popular high-hardness steel chamfer is even more affordable

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 2,455,981 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide is used as the base material, and it is available with a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: 1,681,952 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Stainless Steel[◎]	Single blade	NA	NA	-	-

  From: 1,822,016 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

  OKAZAKI SEIKO

  [Features]・ Three-Flute Type・ For steel, stainless steel· All products are TiN coated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 30	90	Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiN	-

  From: 2,069,017 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	-	-	Available	Other	-

  From: 907,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]·Easy high-quality processing of corner radius·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: 1,209,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 1,523,836 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]· No need to turn over the work material. (Also removes through-hole burrs)· Both sides can be chamfered with the one cutter tool.· Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer / Drilling / Other	Stainless Steel[○]	Single blade	-	Available	TiAlN	-

  From: 4,179,611 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	NA	-	0.2 ～ 5

  From: 1,473,421 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[◎]	Single blade	NA	Available	TS	-

  From: 1,595,616 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,260,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,359,238 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[◎]	Single blade	NA	Available	TiCN	-

  From: 1,728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	Available	Available	TiCN	-

  From: 718,971 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMW-4

  KYOWA SEIKO

  4 straight flutes.90° (included angle type)Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/ResinSingle-edge bladeTool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	Stainless Steel[◎]	Single blade	-	NA	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Double Sided Chamfering Cutter 45° DFC

  THE CUT

  [Features]· Capable of V-grooving both front and back surfaces as well as the side surfaces.· Capable of chamfering up to C2.8 for front chamfering.· The use of a dedicated insert (4 cutting edges) delivers high precision machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11 ～ 20	-	Hole Chamfer / V Groove	Stainless Steel[○]	-	-	-	-	-

  From: 5,660,515 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 2,066,669 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).·Peripheral flutes enable inclined, contour and helical cutting·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type·With helix angle on the peripheral flutes·Can also be used as a deburring tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 1,891,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  MISUMI

  [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	AlCrN	0.5 ～ 3

  From: 1,332,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,200,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  MISUMI

  [Features]・An essential item for corner rounding.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 848,514 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,373,708 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	-	-	Available	TiAlN	-

  From: 1,213,881 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	-	Available	Available	TiAlN	-

  From: 2,076,965 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	-	Available	NA	Non-Coated	-

  From: 1,780,115 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Angular Cutter With TAG Handle G2

  ASAHI TOOLS

  Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table groove

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	15 ～ 100	45° ～ 60°	Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	NA	Non-Coated	-

  From: 4,455,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Brazing shape, angle tolerance ±15'.Maintaining shape accuracy with a straight cutting edge.Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/ResinSingle-edge blade2 blades

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10 ～ 60	60 ～ 90	Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	NA	Non-Coated	-

  From: 3,140,566 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

  OKAZAKI SEIKO

  [Features]・ One-Flute Type・ For steel, stainless steel· All products are TiN coated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	26 ～ 66	90	Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiN	-

  From: 1,943,195 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVMA Chamfering Mill, OK Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	TiAlN	-

  From: 1,926,081 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMC-4

  KYOWA SEIKO

  4 straight flutes.45° (single angle type)Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/AluminumSingle-edge bladeTool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	Stainless Steel[◎]	Single blade	-	NA	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T, 2-flute, Multi 90°

  Poulten&Graf

  [Features]· Blade diameters φ10 or less are high rigidity types with thick shank diameter.· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Double-edged	Available	Available	Other	-

  From: 921,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	OSG	MISUMI	OKAZAKI SEIKO	MISUMI	THE CUT	KYOWA SEIKO	MISUMI	MISUMI	SANDVIK	MISUMI	MISUMI	OSG	UNION TOOL	OKAZAKI SEIKO	7 LEADERS	MISUMI	MISUMI	THE CUT	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	KYOWA SEIKO	THE CUT	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	DIXI	SANKO MFG	SANKO MFG	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	KYOWA SEIKO	Poulten&Graf
Product SeriesDòng sản phẩm	Leading Drill TIN-NC-LDS	XAL Series Carbide Chamfer End Mill 2-Flute	Leading Drill VP-LDS	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	SVM Chamfering Mill, Non-Coated	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	V Men-Maru C-MPE-V	Carbide Chamfering Cutter KMC-2	TS coated carbide chamfer, V grooving end mill, 2-flute	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	TS coated carbide chamfering end mill, 2-flute / short model	TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model	2-flute, Corner Rounding Type FX-ECR	SV Spiral Chamfer Cutter	CS3S Type III Chamfering Cutter (3-Flute), Straight Shank	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	TS coated carbide inner R-cutter, 2-flute	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	Carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	3-flute Chamfering Cutter (negative type) HSCT-N	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Carbide Inversed Chamfering Cutter KUMW-4	Double Sided Chamfering Cutter 45° DFC	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 3-flute / short model	XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	XAL Series Carbide Inner Radius Cutter, 2-Flute	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	Carbide Solid Chamfering Endmill 3-Flute	SAGCCC AS Coated Carbide Center for Chamfering	GCCC, Carbide Center for Chamfering	Angular Cutter With TAG Handle G2	CMC MC Chamfering Cutter G2	CS2S Type II Chamfering Cutter (Single Flute), Straight Shank	SVMA Chamfering Mill, OK Coated	Carbide Inversed Chamfering Cutter KUMC-4	SPEED/T, 2-flute, Multi 90°
CADCAD		2D / 3D		2D / 3D		2D / 3D			2D / 3D	2D / 3D		2D / 3D	2D / 3D					2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D						2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	426,667 VND	935,000 VND	471,340 VND Special Price On Sale Till 31/03/2025	1,227,500 VND	1,549,166 VND	1,373,122 VND	2,146,513 VND	905,500 VND	1,763,476 VND	2,000,567 VND	2,185,571 VND	1,222,151 VND	2,455,981 VND	1,681,952 VND	1,822,016 VND	2,069,017 VND	907,353 VND	1,209,848 VND	1,523,836 VND	4,179,611 VND	1,473,421 VND	1,595,616 VND	1,260,000 VND	2,359,238 VND	1,728,333 VND	718,971 VND	2,327,389 VND	5,660,515 VND	2,066,669 VND	1,891,926 VND	1,332,500 VND	1,200,000 VND	848,514 VND	2,373,708 VND	2,525,376 VND	2,525,376 VND	1,213,881 VND	2,076,965 VND	1,780,115 VND	4,455,326 VND	3,140,566 VND	1,943,195 VND	1,926,081 VND	2,327,389 VND	921,153 VND
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	8 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	8 Day(s) or more	Same day or more	Same day	6 Day(s) or more	7 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	17 Day(s)	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật						TiCN 2 Flutes S (Short)			TS General Steel 2 Flutes	TS General Steel 2 Flutes		TS General Steel 2 Flutes S (Short)	TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)					TS General Steel 2 Flutes			Non-Coated General Steel 2 Flutes	TS SUS 2 Flutes							TS General Steel 2 Flutes	TS General Steel 3 Flutes S (Short)
Tool Material Type	High-speed steel	Carbide	Powder high-speed steel	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Carbide	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	-
Tool Diameter (D)(mm)	3 ～ 25	3 ～ 16	3 ～ 25	3 ～ 12	3 ～ 20	10 ～ 25	3 ～ 20	0.3 ～ 4	3 ～ 16	3 ～ 12	6 ～ 12	3 ～ 12	10	0.5 ～ 1.5	0.8 ～ 1	10 ～ 30	0.5 ～ 20	-	3 ～ 10	2.8 ～ 12	-	3 ～ 12	3 ～ 12	1 ～ 2	-	3 ～ 25	-	11 ～ 20	3 ～ 12	3 ～ 12	-	3 ～ 12	-	1 ～ 2	1 ～ 2	1 ～ 2	2 ～ 12	3 ～ 20	3 ～ 20	15 ～ 100	10 ～ 60	26 ～ 66	3 ～ 20	-	3 ～ 20
Tip angle (θ)	60 ～ 120	60 ～ 120	90	90	90 ～ 120	60 ～ 120	60 ～ 120	90°	60 ～ 120	90	90°	60 ～ 120	90	-	90	90	90	-	90	90°	-	90	90	90	-	90	-	-	90	90	-	-	-	90	90	90	90	-	-	45° ～ 60°	60 ～ 90	90	90 ～ 120	-	90
Application	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Drilling / Other	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Chamfering/Horizontal	Hole Chamfer / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer	Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove
work material	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged
Peripheral Blade Y/N	NA	NA	NA	NA	Available	Available	-	-	NA	Available	NA	Available	NA	NA	NA	NA	-	NA	NA	-	NA	NA	Available	NA	NA	Available	-	-	NA	Available	NA	Available	NA	NA	NA	NA	-	Available	Available	Available	Available	NA	Available	-	Available
Coating Y/N	Available	Available	Available	Available	NA	Available	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	NA	Available	Available	NA	Available	Available	NA	-	Available	Available	Available	Available	Available	NA	NA	NA	Available	Available	NA	NA	NA	Available	Available	NA	Available
Coating Type	TiN	AlCrN	TiCN	TS	Non-Coated	-	TiAlN	-	TS	TS	Other	TS	TS	TiAlN	-	TiN	Other	TS	AlCrN	TiAlN	-	TS	AlCrN	Non-Coated	TiCN	TiCN	-	-	TS	TS	AlCrN	AlCrN	AlCrN	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiN	TiAlN	-	Other
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	0.1 ～ 5	-	-	0.2 ～ 5	-	-	-	-	-	-	-	-	-	0.5 ～ 3	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…