Chamfer, V-Grooves（Application：Chamfering/Horizontal）

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	AlCrN	-

  From: 935,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  V Men-Maru C-MPE-V

  THE CUT

  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,146,513 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Single blade	NA	Available	TS	-

  From: 1,227,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Reamer (3-Flute) MC

  DAIICHITOOL

  [Features]Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	8 ～ 46	60° ～ 90°	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	-	-	-

  From: 1,022,505 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Chamfering/Horizontal	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	Available	Other	-

  From: 907,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,677,570 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,822,016 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	-	NA	-	-

  From: 905,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: 1,222,151 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Chamfering/Horizontal	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]·Ideal for chamfering and V-groove·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: 1,763,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: 2,000,567 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: 1,595,616 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	-	-

  From: 1,373,122 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chatterless chamfer milling machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	60 ～ 120	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 678,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).·Peripheral flutes enable inclined, contour and helical cutting·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type·With helix angle on the peripheral flutes·Can also be used as a deburring tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: 1,891,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model

  MISUMI

  The popular high-hardness steel chamfer is even more affordable

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10	90	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Single blade	NA	Available	TS	-

  From: 2,455,981 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,632,107 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	AlCrN	-

  From: 1,200,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,359,238 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: 1,213,881 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CC, Center for Chamfering

  SANKO MFG

  Center chamfering cutter used in a large variety of different applications.[Features]· As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.· Used in a large variety of different applications.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6 ～ 32	-	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: 1,082,744 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVM Chamfering Mill, Non-Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	Available	NA	Non-Coated	-

  From: 1,549,166 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid V point mill VSE VSESS type

  DIJET

  It is a tool with excellent abrasion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	-	NA	Non-Coated	-

  From: 1,769,716 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]· It enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	Available	Available	TiAlN	-

  From: 2,077,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: 2,066,669 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,662,134 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  MISUMI

  Chamfering end mill with the angle that can be freely selected in 1° increments

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 25	60 ～ 160	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available / NA	TiCN	-

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	AlCrN	-

  From: 1,523,836 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	AlCrN	-

  From: 1,260,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter FX-SCC

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	NA	Available	TiAlN	-

  From: 2,420,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type that can be used for machining deep parts. Since a twisting flute is used, chattering does not occur even if the amount of protrusion is large.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	NA	Available	TiAlN	-

  From: 2,921,398 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC

  OSG

  Long shank type that can be used for machining deep parts. Since a twisting flute is used, chattering does not occur even if the amount of protrusion is large.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,892,711 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,373,708 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: 1,728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  New Chamfering Cutter

  EIKOSHA

  Chamfering New chamfering milling cutter with 1 flute.[Features]·Can be re-polished.·A shape that does not chatter when chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: 2,424,464 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	Available	TiAlN	-

  From: 2,076,965 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: 1,780,115 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	60	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	THE CUT	MISUMI	DAIICHITOOL	IWATA TOOL	7 LEADERS	OSG	UNION TOOL	KYOWA SEIKO	MAKOTOLOY	MISUMI	IWATA TOOL	MISUMI	MISUMI	MISUMI	MISUMI	OSG	FUKUDA	MISUMI	MISUMI	MISUMI	MISUMI	OSG	DIXI	SANKO MFG	OKAZAKI SEIKO	DIJET	NS TOOL	MAKOTOLOY	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	EIKOSHA	SANKO MFG	SANKO MFG	IWATA TOOL
Product SeriesDòng sản phẩm	XAL Series Carbide Chamfer End Mill 2-Flute	V Men-Maru C-MPE-V	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	Chamfering Reamer (3-Flute) MC	Toglon Miniature Hard SP 90° ALT Coating	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC	SV Spiral Chamfer Cutter	Carbide Chamfering Cutter KMC-2	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	TS coated carbide chamfering end mill, 2-flute / short model	Toglon Sharp SP 90° Carbide DLC Coating	TS coated carbide chamfer, V grooving end mill, 2-flute	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	Chatterless chamfer milling machine	TS coated carbide chamfering end mill, 3-flute / short model	TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	3-flute Chamfering Cutter (negative type) HSCT-N	Carbide Solid Chamfering Endmill 3-Flute	CC, Center for Chamfering	SVM Chamfering Mill, Non-Coated	Solid V point mill VSE VSESS type	MUGEN Coating C Chamfer Cutter NSCV-M	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	TS coated carbide chamfering end mill, 2-flute / 15° spiral	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	High-Speed Steel Chamfering End Mill, 2-Flute / Short	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	2-flute Spiral Chamfering Cutter FX-SCC	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	New Chamfering Cutter	SAGCCC AS Coated Carbide Center for Chamfering	GCCC, Carbide Center for Chamfering	Toglon Sharp SP 60° Carbide
CADCAD	2D / 3D		2D / 3D								2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D									2D / 3D	2D / 3D		2D / 3D	2D / 3D
From	935,000 VND	2,146,513 VND	1,227,500 VND	1,022,505 VND	1,937,884 VND	907,353 VND	2,677,570 VND	1,822,016 VND	905,500 VND	3,109,123 VND	1,222,151 VND Special Price On Sale Till 31/03/2025	2,149,554 VND	1,763,476 VND	2,000,567 VND Special Price On Sale Till 31/03/2025	1,595,616 VND	1,373,122 VND	2,525,376 VND	678,775 VND	1,891,926 VND	2,455,981 VND	1,632,107 VND	1,200,000 VND	2,359,238 VND	1,213,881 VND	1,082,744 VND	1,549,166 VND	1,769,716 VND	2,077,788 VND	2,168,698 VND	3,109,123 VND	2,066,669 VND	1,662,134 VND		1,523,836 VND	1,260,000 VND	2,420,240 VND	2,921,398 VND	2,892,711 VND	2,373,708 VND	2,525,376 VND	1,728,333 VND	2,424,464 VND	2,076,965 VND	1,780,115 VND	1,544,838 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	7 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day	Same day or more	4 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	17 Day(s)	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật											TS General Steel 2 Flutes S (Short)		TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS SUS 2 Flutes	TiCN 2 Flutes S (Short)			TS General Steel 3 Flutes S (Short)	TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)	Non-Coated Aluminum 2 Flutes										TS General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes	Non-Coated 2 Flutes S (Short)
Tool Material Type	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	High-speed steel	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 16	3 ～ 20	3 ～ 12	8 ～ 46	0.1 ～ 1.5	0.5 ～ 20	0.8 ～ 1	0.8 ～ 1	0.3 ～ 4	3 ～ 20	3 ～ 12	1.2 ～ 16	3 ～ 16	3 ～ 12	3 ～ 12	10 ～ 25	1 ～ 2	-	3 ～ 12	10	3 ～ 12	3 ～ 12	1 ～ 2	2 ～ 12	6 ～ 32	3 ～ 20	3 ～ 20	4 ～ 6	1 ～ 20	3 ～ 20	3 ～ 12	3 ～ 12	10 ～ 25	3 ～ 10	3 ～ 12	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	-	6	3 ～ 20	3 ～ 20	1.2 ～ 16
Tip angle (θ)	60 ～ 120	60 ～ 120	90	60° ～ 90°	90	90	90	90	90°	90	60 ～ 120	90	60 ～ 120	90	90	60 ～ 120	90	60 ～ 120	90	90	90	-	90	90	-	90 ～ 120	60 ～ 120	45°	90	120	90	90	60 ～ 160	90	90	90	90	90	90	90	-	60	-	-	60
Application	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal
work material	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	Single blade
Peripheral Blade Y/N	NA	-	NA	Available	NA	-	NA	NA	-	-	Available	NA	NA	Available	NA	Available	NA	NA	Available	NA	NA	Available	NA	-	Available	Available	-	Available	-	-	NA	NA	Available	NA	Available	NA	NA	NA	NA	NA	NA	-	Available	Available	NA
Coating Y/N	Available	Available	Available	-	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	NA	NA	Available	Available	NA	Available	NA	Available	NA	NA	NA	Available	NA	Available	Available	NA	Available / NA	Available	Available	Available	Available	NA	NA	NA	Available	-	Available	NA	NA
Coating Type	AlCrN	TiAlN	TS	-	ALT	Other	Non-Coated	-	-	TiAlN	TS	DLC	TS	TS	TS	-	Non-Coated	Non-Coated	TS	TS	-	AlCrN	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiAlN	-	TiAlN	TS	-	TiCN	AlCrN	AlCrN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiCN	-	TiAlN	Non-Coated	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…