Chamfering / Centering Tools（Page7）

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Hard SP 90° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 1,847,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A Type 60゜

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	60	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 654,879 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 1	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	Other	-

  From: 937,762 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit, A Type 90°

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	90	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,289,496 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 545,306 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, Long Type, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 1,211,005 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60° ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°, Long Type ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 1,358,151 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating

  IWATA TOOL

  [Features]· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.· Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Double-edged	NA	Available	Other	-

  From: 1,163,793 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, B-Type, ALD Coating

  IWATA TOOL

  [Features]· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.· Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6.3	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Double-edged	NA	Available	Other	-

  From: 2,043,522 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Samurai

  FUJIGEN

  [Features]· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.· Achieves high runout accuracy within 5/1,000 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 10	90	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,714,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	10.3 ～ 12.3	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,349,618 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	14.2 ～ 17.1	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 3,347,380 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco 2

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16.5 ～ 18.6	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 5,010,447 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco 2

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.3 ～ 25.3	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 6,673,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter

  FUJIGEN

  [Features]· Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.· Tips are available in many types to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	29.9 ～ 37.9	15 ～ 70	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 8,336,385 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kame Cutter

  FUJIGEN

  [Features]· Reduction of work time. : The special tip shape enables high-feed processing

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.9	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 9,145,728 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut / V

  FUJIGEN

  [Features]· Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	19.5 ～ 45.6	45	Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 5,225,868 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Uratorimen-C

  FUJIGEN

  This tool is specialized for back chamfering in drilling and edge chamfering.The insert with chip breaker provides excellent sharpness.Since the insert is replaceable, there is no need to re-grind it.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6.2 ～ 14	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 4,936,698 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.· 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 13,935,240 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender dedicated arm

  FUJIGEN

  It is a dedicated accessory for the Baitender.A wide area of chamfering is possible with the telescopic tool bit.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,613,026 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Cutting Bit

  FUJIGEN

  [Features]・ Easy for R change: Various round chamfering processes are possible by interchangeable inserts

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5 to 4

  From: 8,794,706 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: 3,822,654 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special

  FUJIGEN

  Replaceable insert for round chamfering of R0.5 to R5.Carbide insert that can be used on 4 sides with 1 insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	56	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: 10,712,167 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R5 to R10.Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	35.4	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	5–10

  From: 4,297,732 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau

  FUJIGEN

  Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	69.2	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	5–10

  From: 11,424,686 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut R

  FUJIGEN

  [Features]· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.· Mini R is for front only.· Uses a tip that allows 8 corners to be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	30 ～ 48	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5 ～ 1–5

  From: 9,524,178 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini R

  FUJIGEN

  8 corners of an insert can be used.Round chamfering and C chamfering are possible by exchanging the insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	1–5

  From: 3,822,654 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibieco and Chibieco 2 TXMT080206

  FUJIGEN

  An indexable insert that can perform chamfering.[Applications]Used for centering (positioning) / chamfering / horizontal running.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	AlCrN	-

  From: 498,927 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Momieco / Momieco 2 TXMT110306

  FUJIGEN

  An indexable insert that can perform chamfering.Compatible models: Momieco/Momieco 2/Urazaguru[Applications]Used for centering (positioning) / chamfering / horizontal running.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	AlCrN	-

  From: 539,798 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Momimen nano ENGX040102

  FUJIGEN

  Insert for Momimen nano.[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available	AlCrN	-

  From: 669,436 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Tip for Momimen / All C32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated / AlCrN	-

  From: 495,065 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tips for Decamomi T32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated	-

  From: 567,018 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for 60° Momimen D43GUX

  FUJIGEN

  An indexable insert for 60° Momimen that can be used for center spotting and chamfering.[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated	-

  From: 723,534 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Ecomen / Ecomen 2 TXMT16T306

  FUJIGEN

  An indexable insert that can perform chamfering.Compatible models: Ecomen / Ecomen 2 / Choumen / Choumen B[Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	AlCrN	-

  From: 583,902 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal / Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated / AlCrN	-

  From: 425,504 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Young Men TNEX270412

  FUJIGEN

  A dedicated indexable insert for a chamfer cutter Young Men that can perform chamfering.[Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	Aluminum[○] / Resin[○]	-	-	NA	Non-Coated	-

  From: 820,517 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Young Men TNMX270412

  FUJIGEN

  A dedicated indexable insert for a chamfer cutter Young Men that can perform chamfering.[Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	AlCrN	-

  From: 669,436 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Gentlemen, Insert X63GUR

  FUJIGEN

  A dedicated carbide insert for Gentlemen that can perform chamfering.[Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available / NA	Non-Coated / AlCrN	-

  From: 1,209,235 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Ryanmen Cut/V T22MOR

  FUJIGEN

  A K10 grade carbide insert for Ryanmencut-V.[Applications]Used for back and surface chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: 454,618 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN
Product SeriesDòng sản phẩm	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Toglon Sharp SP 60° ALD Coating	Toglon Hard SP 90° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	Carbide HG Center Drill Bit A Type 60゜	Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating	Carbide HG Center Drill Bit, A Type 90°	Carbide SP Center, 120°, ALD Coating	Carbide SP Center, 120°, Long Type, ALD Coating	Carbide SP Center 60° ALD Coating	Carbide SP Center 90°, Long Type ALD Coating	Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating	Carbide Center Drill Bit, B-Type, ALD Coating	Aluminum Samurai	Mini eco	Momi Eco	Mini eco 2	Momi Eco 2	Chamfering cutter	Kame Cutter	Ryanmencut / V	Uratorimen-C	Multi Angle Mill	Baitender dedicated arm	R Cutting Bit	R Special Jr.	R Special	R-Nouveau Jr.	R-Nouveau	Ryanmencut R	Mini R	Tips for Chibieco and Chibieco 2 TXMT080206	Tip for Momieco / Momieco 2 TXMT110306	Tip for Momimen nano ENGX040102	Tip for Momimen / All C32GUX	Tips for Decamomi T32GUX	Tip for 60° Momimen D43GUX	Tip for Ecomen / Ecomen 2 TXMT16T306	Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR	Tip for Young Men TNEX270412	Tip for Young Men TNMX270412	For Gentlemen, Insert X63GUR	Tip for Ryanmen Cut/V T22MOR
CADCAD
From	2,451,912 VND	1,544,838 VND	2,451,912 VND	2,149,554 VND	1,847,196 VND	1,937,884 VND	654,879 VND	937,762 VND	1,289,496 VND	545,306 VND	1,211,005 VND	739,665 VND	1,358,151 VND	1,163,793 VND	2,043,522 VND	2,714,526 VND	2,349,618 VND	3,347,380 VND	5,010,447 VND	6,673,318 VND	8,336,385 VND	9,145,728 VND	5,225,868 VND	4,936,698 VND	13,935,240 VND	2,613,026 VND	8,794,706 VND	3,822,654 VND	10,712,167 VND	4,297,732 VND	11,424,686 VND	9,524,178 VND	3,822,654 VND	498,927 VND	539,798 VND	669,436 VND	495,065 VND	567,018 VND	723,534 VND	583,902 VND	425,504 VND	820,517 VND	669,436 VND	1,209,235 VND	454,618 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s) or more	6 Day(s) or more	9 Day(s)	10 Day(s) or more	4 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s)	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Diameter (D)(mm)	2 ～ 16	3 ～ 12	3 ～ 12	0.6 ～ 4	0.6 ～ 4	0.1 ～ 1.5	0.2 ～ 3	0.2 ～ 1	0.2 ～ 3	0.4 ～ 16	2 ～ 12	0.1 ～ 6	0.5 ～ 4	1 ～ 6	1 ～ 6.3	4 ～ 10	10.3 ～ 12.3	14.2 ～ 17.1	16.5 ～ 18.6	22.3 ～ 25.3	29.9 ～ 37.9	34.9	19.5 ～ 45.6	6.2 ～ 14	-	16	-	25	56	35.4	69.2	30 ～ 48	16	-	-	-	-	-	-	-	-	-	-	-	-
Tip angle (θ)	60	90	90	60	90	90	60	60	90	120	120	60	90	60	60	90	90 ～ 120	90 ～ 120	30 ～ 60	30 ～ 60	15 ～ 70	45	45	45	0–90	45	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal / Round Chamfer	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal
work material	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	-	-	-	-	-	-	-	-
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	Available	NA	Available	Available	Available	Available	NA	Available	NA	Available	Available	Available	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	Available / NA	Available / NA	Available / NA	Available	Available / NA	NA	Available	Available / NA	Available
Coating Type	DLC	-	DLC	Other	Other	ALT	-	Other	-	Other	Other	Other	Other	Other	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	AlCrN	AlCrN	AlCrN	TiAlN / TiN / Non-Coated / AlCrN	TiAlN / TiN / Non-Coated	TiAlN / TiN / Non-Coated	AlCrN	TiAlN / TiN / Non-Coated / AlCrN	Non-Coated	AlCrN	Non-Coated / AlCrN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 to 4	0.5~5	0.5~5	5–10	5–10	0.5~5 ～ 1–5	1–5	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…