(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
35 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
From: 970,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]· OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・ It can process high hardness materials up to HRC62
From: 1,471,615 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· A general-purpose reamer that can be used in the same way as a hand reamer. Supports high-speed rotation unlike a high-speed steel hand reamer, is highly durable, and can be used for difficult-to-cut materials. Can also be used at a higher cutting speed and feed rate. Allows rough surfaces within holes to be given a clean finish. Also enables the machining of workpieces with a hardness of HRC 50 to 60. Offers excellent durability.
From: 1,367,581 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type
From: 1,089,138 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy·Drilling is possible under cutting conditions of 60 m/min or more·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
From: 2,860,723 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
[Features]· Solid type・ The rough cutting edge at the tip stabilizes the finished dimensions with a uniform machining allowance.· Helix angle 35°・ Rough flute, finishing edge 2 steps finish
From: 1,490,738 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
From: 1,581,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length·Long type allows reaming of deep areas
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
From: 821,405 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NEW STRONG
[Features]· The blade groove division angles are unequally divided.· If the division angles of the blade grooves are the same, the same force will be applied to each blade, which causes the same vibration and makes them susceptible to resonance, causing chattering.· By unequally dividing the blade grooves, the force applied to each blade is also changed to suppress resonance, and by decreasing chattering, the processing accuracy is improved and roundness is stabilized.· A carbide tip is brazed onto SCM (adhesive material) to relax the spindle flex.· Grip quality of holder improved: The use of an endmill shank (quenched) makes collet use possible, with better grip accuracy compared to drill chucks. Special collet manufacturing is not required.· Improved blade diameter precision: Uses k5 for the blade diameter tolerance to make it easier to enter at H7 tolerance.· Neck is designed to be longer for deep hole machining
From: 2,644,107 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NEW STRONG
[Features]· Material: Z-10 solid.· Ideal for modification of holes after drilling for semi-finishing or machining prior to reaming.· Produced at a maximum of φ28.8, with repolishing possible (tipped at φ13.8 or higher)
From: 5,563,426 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]· The cutting speed is approximately 2.5 times that of conventional coating reamers.· The pinpoint lubrication improves the weld resistance and machined surface roughness
From: 4,864,710 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-DLC
EIKOSHA
[Features]· Exhibits excellent weld resistance with aluminum, non-ferrous metal, etc.· Thin film that does not impair machinability.
From: 5,687,265 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· For hole finish machining of cast iron and general steel· MCO material (cobalt high-speed steel) is used
From: 859,651 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Powerful Reamer CPRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]・OKTough Coat realizes high speed machining and long life・ Solid type・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip ・ Torsion angle 45°
From: 1,911,461 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge flute at the tip· Helix angle 35°
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features] · Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
From: 1,962,348 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | FPTOOLS | OSG | OKAZAKI SEIKO | FPTOOLS | MISUMI | EIKOSHA | TRUSCO NAKAYAMA | MISUMI | OKAZAKI SEIKO | MISUMI | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | FPTOOLS | OKAZAKI SEIKO | MISUMI | MISUMI | EIKOSHA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OKAZAKI SEIKO | NEW STRONG | NEW STRONG | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | FPTOOLS |
Product SeriesDòng sản phẩm | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | ||||||||||||||||||||||||||||
From | 519,142 VND | 970,000 VND | 1,471,615 VND | 1,247,050 VND | 1,351,933 VND | 1,367,581 VND | 974,395 VND | 829,294 VND | 1,089,138 VND | 2,860,723 VND | 722,944 VND | 1,490,738 VND | 2,180,046 VND | 1,581,436 VND | 821,405 VND | 2,644,107 VND | 5,563,426 VND | 4,864,710 VND | 5,687,265 VND | 859,651 VND | 1,911,461 VND | 974,395 VND | 1,962,348 VND | ||||||||||||
Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more |
Tool Diameter(mm) | 0.2 ~ 12.1 | 0.3 ~ 13.05 | 2.95 ~ 12 | 0.5 ~ 10.009 | 0.3 ~ 15.995 | 0.8 ~ 12.05 | 1 ~ 1.4 | 0.3 ~ 15.99 | 2.95 ~ 2.96 | 1 ~ 10 | 2.95 ~ 2.96 | 0.4 ~ 5.995 | 2 ~ 10 | - | 2.91 ~ 12.1 | 2.95 ~ 12.05 | 0.4 ~ 15.995 | 0.5 ~ 5.9 | 0.5 ~ 12.05 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 0.3 ~ 5.99 | 1.8 ~ 5 | - | 2.95 ~ 12.05 | 6.00 (for H7) ~ 13.00 (for H7) | 5.8 ~ 12.8 | 2.97 ~ 20.03 | 12 | 1 ~ 2 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 2.985 ~ 10.025 |
Groove Length(mm) | 3 ~ 45 | - | - | 5 ~ 40 | 0.5 ~ 48 | 12 ~ 45 | - | 0.5 ~ 48 | 26 ~ 31 | 12 ~ 40 | 27 ~ 30 | 0.5 ~ 34 | 12 ~ 52 | - | 20 ~ 25 | 20 ~ 31 | 0.5 ~ 48 | 3 ~ 10 | 6 ~ 45 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 27 ~ 40 | 0.5 ~ 34 | - | - | 22 ~ 35 | 20 ~ 30 | 20 ~ 30 | 19 ~ 25 | 19 ~ 25 | 30 | 26 ~ 31 | 30 | 12 ~ 24 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | Stainless Steel[○] |
Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | Available | NA | NA | Available | NA | NA | Available | Available ~ NA | Available | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | - | Available | Available | NA | Available | Available | NA |
Groove Shape | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Helical | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Helical | Straight | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight |
Base Blade Y/N | NA | NA | NA | NA | Available | NA | - | NA | NA | NA | NA | Available | NA | - | NA | NA | Available | NA | NA | Available | Available | Available | Available | NA | NA | - | NA | - | - | NA | NA | NA | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy