(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
23 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]· OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・ It can process high hardness materials up to HRC62
From: 1,471,615 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent abrasion resistance for finishing deep holes.
From: 1,319,004 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type
From: 1,089,138 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.[Features]· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.· φ0.2-3 (0.2-3 mm diameter) types are available.[Applications]· Ideal for finish machining of ultra-small diameter holes.
From: 940,661 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,352,643 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).[Features]· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.· Provides excellent finish for high-hardness workpieces as well.[Applications]· For finish machining of 1/50 taper pin holes.
From: 1,031,597 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCR Carbide Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 3,307,501 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 725,786 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCRT Carbide Chucking Reamer (Morse Taper Shank)
OKAZAKI SEIKO
Carbide tipped type, morse taper shank specification. Deep hole drilling is possible with a neck diameter smaller than the blade diameter
From: 3,632,606 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CCRM Carbide Chucking Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSR Carbide Short Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]· Solid type・ Ten times longer lifespan than HSS reamer.・ It supports a wide range of workpieces from cast iron to steel.· It is capable of high precision drilling・ It reduces machining time・ General-purpose carbide reamer・ Short type with less runout
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Long Shank Chucking Reamer CSCRL
EIKOSHA
[Features]· Short blade length and super long shank.· Ideal for deep hole finishing.
From: 3,323,618 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Powerful Reamer CPRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]・OKTough Coat realizes high speed machining and long life・ Solid type・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip ・ Torsion angle 45°
From: 1,911,461 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge flute at the tip· Helix angle 35°
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | FPTOOLS | EIKOSHA | OKAZAKI SEIKO | FPTOOLS | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | FPTOOLS | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO |
Product SeriesDòng sản phẩm | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | ||||||||||||||||||||||
From | 519,142 VND | 717,840 VND | 1,471,615 VND | 1,247,050 VND | 1,351,933 VND | 1,319,004 VND | 974,395 VND | 1,214,660 VND | 649,290 VND | 1,089,138 VND | 722,944 VND | 2,180,046 VND | 940,661 VND | 1,352,643 VND | 1,031,597 VND | 3,307,501 VND | 725,786 VND | 3,632,606 VND | 764,033 VND | 649,290 VND | 3,323,618 VND | 1,911,461 VND | 974,395 VND |
Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
Tool Diameter(mm) | 0.2 ~ 12.1 | 0.4 ~ 20.05 | 2.95 ~ 12 | 0.5 ~ 10.009 | 0.8 ~ 12.05 | 0.4 ~ 10.05 | 2.95 ~ 2.96 | 0.8 ~ 12.05 | 1.995 ~ 5.03 | 2.95 ~ 2.96 | 2.91 ~ 12.1 | 0.5 ~ 12.05 | 0.2 ~ 3 | 1 ~ 30 | - | 12.5 ~ 30 | 3 ~ 12 | 12.5 ~ 30 | 2.95 ~ 12.05 | 1 ~ 20 | 3 ~ 20 | 2.95 ~ 2.96 | 2.95 ~ 2.96 |
Groove Length(mm) | 3 ~ 45 | 4 ~ 80 | - | 5 ~ 40 | 12 ~ 45 | 20 ~ 150 | 26 ~ 31 | 15 ~ 80 | 18 ~ 30 | 27 ~ 30 | 20 ~ 25 | 6 ~ 45 | 3 ~ 25 | 15 ~ 75 | 28 ~ 194 | 36 ~ 46 | 26 ~ 31 | 36 ~ 46 | 26 ~ 31 | 12 ~ 45 | 35 ~ 60 | 26 ~ 31 | 30 |
work material | Die Steel[◎] | Die Steel[○] | Die Steel[○] | Die Steel[◎] | Die Steel[◎] | Die Steel[○] | Die Steel[◎] | Die Steel[○] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[○] | Die Steel[○] | Die Steel[○] | Die Steel[○] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[○] | Die Steel[◎] | Die Steel[◎] |
Shank Type | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | Morse Taper Shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | Available | NA | Available | NA | Available | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available |
Groove Shape | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Spiral |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | - | - | - | - | - | - | - | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy