(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Screw-Hole-Related Tools（Screw size (Nominal)：M16）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Show More Detail Show More Detail

Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn

Brand	(5) (0) CARMEX (0) EIKOSHA (1) ENGINEER (0) ESCO (0) GUHRING (5) HAZET (0) HIT (0) HOZAN (0) ISHIHASHI (5) JAEGER (0) KANETEC (0) KDY (0) KING TONY (0) KO-KEN TOOL (0) LIGHTSEIKI (0) MITSUTOMO (0) NACHI(FUJIKOSHI) (5) NEW STRONG (0) NOGA JAPAN (0) NS TOOL (0) ONISHI MANUFACTURING (0) OSG (41) OSG KOREA CORP (6) POWERCOIL (0) RECOIL (0) RENNSTEIG (0) RUKO (0) SAMJUNG (0) SANDVIK (0) SBK (5) SHINSUNG INDUSTRY (0) SKC (3) SMATO (3) TAEHWA TOOLS (0) TANOI MFG (1) TOP (0) TRUSCO NAKAYAMA (11) TSUBOSAN (0) UNION TOOL (0) VERTEX (0) YAMAWA MFG (57) YG 1 (7) ＳＵＰＥＲＴＯＯＬ (4)
CAD	2D 3D
Days to Ship	All Same day 2 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less Others

159 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Oversize Hand Tap

SKC

[Applications]It can be used for machining larger diameter threaded holes than usual in plating and heat treatment processes.[Features]High speed steel with excellent heat resistance and thermal damage resistance is used.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	2	-	Hand Tap	-	1.5P ～ 9P	-	-	95

From: 1,613,740 VND
Days to Ship: Số ngày giao hàng: 7 Day(s) or more

7 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Taps_HT

YAMAWA MFG

Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 2	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	95

From: 684,031 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Model A Tap Series, Spiral Tap A-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Volume Discount

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	95

From: 1,918,333 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Pointed Tap Series, General Purpose EX-POT

OSG

It is used for general purposes and is suitable for work materials in which cutting chips are continuously coiled in carbon steel, steel alloy and non-ferrous metals. The cutting chips are pushed forward reliably, so there is no risk of cutting chip damage.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	95

From: 1,020,000 VND
Days to Ship: Số ngày giao hàng: 17 Day(s) or more

17 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap for General Application_EX-SFT

OSG

It is used for blind holes, and is suitable for work materials with continuous cutting chips in a coil shape in carbon steel, steel alloy, and non-ferrous metals.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	95

From: 1,059,999 VND
Special Price
Days to Ship: Số ngày giao hàng: 17 Day(s) or more

17 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Tap for General Use HT

OSG

High-speed steel hand tap.Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible

Volume Discount

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 2	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 9P	Non-Coated	NA	75 ～ 95

From: 756,386 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Point Tap Oversize

SKC

[Features]·Steam oxide treatment for excellent rust prevention, corrosion resistance, and durability[Applications]·Plating processing, heat treatment processing

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	2	-	Point tap	-	-	-	-	95

From: 2,086,653 VND
Days to Ship: Số ngày giao hàng: 7 Day(s) or more

7 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Combo Spiral Tap Coating / Non-coating / Tin (T1809 / T2809 / 2819)

YG 1

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	1 ～ 2	Cobalt HSS	Spiral Tap	For blind hole	2.5	TiN / Homo	Available / NA	95

From: 951,718 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Model A Tap Series, Pointed Tap A-POT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	1 ～ 2	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	95

From: 1,883,333 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

OSG

Suitable for steel and non-ferrous alloys. High-speed cutting is possible, durability is greatly improved, and highly efficient tapping is possible.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Roll tap	For blind hole	2P ～ 4P	TiN	Available	95

From: 2,763,628 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Straight Flutes Tap TiN coated_TIN-HT

OSG

It has excellent cutting edge strength and is suitable for high hardness materials that do not connect cutting chips.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	95

From: 1,432,708 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Combo Tap General (T1829 / T2829 / T3829)

YG 1

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	1.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5	Homo	Available	95

From: 1,255,902 VND
Days to Ship: Số ngày giao hàng: 6 Day(s)

6 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Hand Taps for Stainless Steels_SU-HT

YAMAWA MFG

Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	1 ～ 1.5	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 4P	-	NA	95

From: 1,300,930 VND
Special Price
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Solid Die D for Metric Threads

YAMAWA MFG

Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	-	0.5 ～ 2	High-speed steel	Die	-	-	-	NA	-

From: 1,688,585 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Fluted Taps_SP

YAMAWA MFG

The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	95

From: 799,019 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Threading Round Die Series Pipe General Threading Round Die RD-S

OSG

[Specifications]· Shape: Die· Coating: Non-Coated· Tool material: Alloy HSS (SKS)

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	-	0.5 ～ 2	Alloy HSS	Die	-	-	Non-Coated	NA	-

From: 1,501,581 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.5 ～ 2	Cobalt HSS	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	95

From: 656,221 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap General Purpose, Long Shank EX-LT-SFT

OSG

It is used when the tool runout of the thread section is insufficient with the standard spiral flute tap.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	150 ～ 250

From: 1,971,666 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

EX-SFT for General Purpose/ EX-H-SFT Coating Treatment for General Purpose / TIN-SFT Tin Coated

OSG KOREA CORP

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For through hole / For blind hole	2.5	TiN / Homo	Available / NA	95

From: 1,123,538 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Fluteless Tap (X Performer)_S-XPF

OSG

There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.5 ～ 2	Powder high-speed steel	Roll tap	For through hole / For blind hole	2P	TiCN	Available	95

From: 2,716,303 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Tap Set (for Metric Screws/HSS-E)

TRUSCO NAKAYAMA

[Features]· Can be used for both through holes and blind holes.· It is a high-speed steel (HSS-E) tap set.[Applications]· Work materials: General steel, low/medium carbon steel, alloy steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	2	High-speed steel	Hand Tap	For through hole / For blind hole	-	Non-Coated	NA	95

From: 2,352,569 VND
Special Price
Days to Ship: Số ngày giao hàng: 10 Day(s)

10 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap for Blind Hole 1013

GUHRING

[Features]· JIS standard compliant tap for blind holes.· Supports a wide range of work materials from general steel to stainless steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	-	2	High-speed steel	Spiral Tap	For blind hole	-	TiN	Available	95

From: 1,547,548 VND
Days to Ship: Số ngày giao hàng: 24 Day(s) or more

24 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Pointed Taps_PO

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	High-speed steel	Point tap	For through hole	5P	-	NA	95

From: 768,060 VND
Special Price
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Spiral Fluted Taps, Oxidized_SP-OX

YAMAWA MFG

Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	95

From: 799,019 VND
Days to Ship: Số ngày giao hàng: 6 Day(s)

6 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Round Die For Metric Screw

TRUSCO NAKAYAMA

[Features]· Dimensional adjustments can be made with the adjustment screw provided. · Can also be used to modify screw threads. · For round dies. [Applications]· Work materials: iron, light metals. · For male threading. · Correction of coarse screw threads.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1.5 ～ 2	Alloy HSS	Die	-	-	-	-	-

From: 953,833 VND
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Spiral Pointed Tap with Long Shank_A-LT-POT

OSG

It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. Spiral point tap with point groove used for through holes.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	1 ～ 2	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	150 ～ 200

From: 2,471,666 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1.5 ～ 2	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	TiCN	Available	95

From: 1,937,023 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Taps for Cast Irons_FC-HT

YAMAWA MFG

[Features]· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○]	1.5	High-speed steel	Hand Tap	For through hole / For blind hole	5P	Nitriding Treatment	Available	95

From: 1,041,243 VND
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT

OSG

Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	High Hardness Steel (50-60 HRC)[◎]	1.5 ～ 2	Carbide	Hand Tap	For through hole / For blind hole	3P	Other	Available	95

From: 12,483,333 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Long Shank Spiral Fluted Taps_LS-SP

YAMAWA MFG

* LS-N-SP will switch to LS-SP as soon as the stock runs out.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	150 ～ 250

From: 1,624,441 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Taps for Hard-to-Machine Materials_EH-HT

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○]	1.5 ～ 2	Cobalt HSS	Hand Tap	For through hole / For blind hole	2.5P ～ 5P	-	NA	95

From: 1,096,711 VND
Special Price
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

T Spiral Tap TSP

NACHI(FUJIKOSHI)

General-purpose tap used for threading blind holes.[Features]· The special groove shape excels in chip discharge properties, eliminating biting of chips and winding around taps.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	2	Alloy HSS	Spiral Tap	For blind hole	2.5P	-	Available	95

From: 720,000 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

EX-POT for General Purpose / EX-H-POT Coating Treatment for General Purpose

OSG KOREA CORP

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5	Homo	Available / NA	95

From: 1,427,723 VND
Days to Ship: Số ngày giao hàng: 4 Day(s)

4 Day(s)

You can add up to 6 items per a category to the compare list. Compare

T Gun Taps TGN

NACHI(FUJIKOSHI)

General purpose tap.[Features]· Used for through-hole thread tapping.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	2	High-speed steel	Point tap	For through hole	5P	-	NA	95

From: 646,667 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap for Stainless Steels_EX-SUS-SFT

OSG

Suitable for blind hole stainless steel, copper, and thermoplastic plastics. Also suitable for materials such as carbon steel and steel alloy.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	1.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	95

From: 1,231,000 VND
Days to Ship: Số ngày giao hàng: 17 Day(s) or more

17 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Pointed Tap for Stainless Steel use EX-SUS-POT

OSG

Used in the through hole of poorly machinable stainless steel, it shows excellent cutting performance and durability. In addition to stainless steel, it is also suitable for various heat resistant steels and strong nickel-chromium-manganese steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	1.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	4P	Non-Coated	NA	95

From: 1,153,333 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Spiral Fluted Taps for Stainless Steels_SU+SP

Spiral Fluted Taps for Stainless Steels_SU+SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	1.5 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	95

From: 1,002,617 VND
Special Price
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Taps for Left Hand Threads_HT-LH

YAMAWA MFG

It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	95

From: 1,124,833 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Pointed Taps, Oxidized_PO-OX

YAMAWA MFG

Point taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.· This prevents parts welding together and improves the finished surface roughness of the female thread.· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	2	High-speed steel	Point tap	For through hole	5P	-	NA	95

From: 640,050 VND
Days to Ship: Số ngày giao hàng: 6 Day(s)

6 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Combo Spiral Long Tap General (T18 Series / T28 Series / TS721 Series)

YG 1

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5	Non-Coated / Homo	Available / NA	120 ～ 150

From: 1,502,545 VND
Days to Ship: Số ngày giao hàng: 6 Day(s)

6 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap with Long Shank_A-LT-SFT

OSG

It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. A spiral flute tap with a spiral groove that is mainly used for blind holes.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	150 ～ 200

From: 2,228,161 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap Short Chamfer type_EX-SC-SFT

OSG

The chamfer length is 1.5-tooth. It is ideal when the effective screw length cannot be secured with a blind hole and a spiral flute tap for general use with a 2.5-tooth chamfer length.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	1.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P	Non-Coated	NA	95

From: 1,094,803 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

CPM Spiral Tap_CPM-SFT

OSG

Work material ideal for forging high carbon steel, tool steel, steel alloy, or blind hole drilling with a hardness of 20 to 35 HRC for tempering

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	1.5 ～ 2	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	95

From: 2,036,667 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Spiral Pointed Taps for Stainless Steels_SU+PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	1 ～ 2	High-speed steel	Point tap	For through hole	5P	-	NA	95

From: 1,124,833 VND
Special Price
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Long Shank Hand Taps_LS-HT

YAMAWA MFG

It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	150 ～ 200

From: 1,451,616 VND
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)


BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SKC	YAMAWA MFG	OSG	OSG	OSG	OSG	SKC	YG 1	OSG	OSG	OSG	YG 1	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	MISUMI	OSG	OSG KOREA CORP	OSG	TRUSCO NAKAYAMA	GUHRING	YAMAWA MFG	YAMAWA MFG	TRUSCO NAKAYAMA	OSG	NACHI(FUJIKOSHI)	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG KOREA CORP	NACHI(FUJIKOSHI)	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YG 1	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	Oversize Hand Tap	Hand Taps_HT	Model A Tap Series, Spiral Tap A-SFT	Pointed Tap Series, General Purpose EX-POT	Spiral Tap for General Application_EX-SFT	Hand Tap for General Use HT	Spiral Point Tap Oversize	Combo Spiral Tap Coating / Non-coating / Tin (T1809 / T2809 / 2819)	Model A Tap Series, Pointed Tap A-POT	Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT	Straight Flutes Tap TiN coated_TIN-HT	Combo Tap General (T1829 / T2829 / T3829)	Hand Taps for Stainless Steels_SU-HT	Solid Die D for Metric Threads	Spiral Fluted Taps_SP	Threading Round Die Series Pipe General Threading Round Die RD-S	MT Series High-Speed Steel Spiral Tap	Spiral Tap General Purpose, Long Shank EX-LT-SFT	EX-SFT for General Purpose/ EX-H-SFT Coating Treatment for General Purpose / TIN-SFT Tin Coated	Fluteless Tap (X Performer)_S-XPF	Hand Tap Set (for Metric Screws/HSS-E)	Spiral Tap for Blind Hole 1013	Spiral Pointed Taps_PO	Spiral Fluted Taps, Oxidized_SP-OX	Round Die For Metric Screw	Spiral Pointed Tap with Long Shank_A-LT-POT	SG Spiral Tap SGSP	Hand Taps for Cast Irons_FC-HT	Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT	Long Shank Spiral Fluted Taps_LS-SP	Hand Taps for Hard-to-Machine Materials_EH-HT	T Spiral Tap TSP	EX-POT for General Purpose / EX-H-POT Coating Treatment for General Purpose	T Gun Taps TGN	Spiral Tap for Stainless Steels_EX-SUS-SFT	Pointed Tap for Stainless Steel use EX-SUS-POT	Spiral Fluted Taps for Stainless Steels_SU+SP	Hand Taps for Left Hand Threads_HT-LH	Spiral Pointed Taps, Oxidized_PO-OX	Combo Spiral Long Tap General (T18 Series / T28 Series / TS721 Series)	Spiral Tap with Long Shank_A-LT-SFT	Spiral Tap Short Chamfer type_EX-SC-SFT	CPM Spiral Tap_CPM-SFT	Spiral Pointed Taps for Stainless Steels_SU+PO	Long Shank Hand Taps_LS-HT
From	1,613,740 VND	684,031 VND Special Price On Sale Till 31/03/2025	1,918,333 VND	1,020,000 VND	1,059,999 VND Special Price On Sale Till 31/03/2025	756,386 VND	2,086,653 VND	951,718 VND	1,883,333 VND	2,763,628 VND	1,432,708 VND	1,255,902 VND	1,300,930 VND Special Price On Sale Till 31/03/2025	1,688,585 VND	799,019 VND Special Price On Sale Till 31/03/2025	1,501,581 VND	656,221 VND	1,971,666 VND	1,123,538 VND	2,716,303 VND	2,352,569 VND Special Price On Sale Till 31/03/2025	1,547,548 VND	768,060 VND Special Price On Sale Till 31/03/2025	799,019 VND	953,833 VND	2,471,666 VND	1,937,023 VND	1,041,243 VND	12,483,333 VND	1,624,441 VND	1,096,711 VND Special Price On Sale Till 31/03/2025	720,000 VND	1,427,723 VND	646,667 VND	1,231,000 VND	1,153,333 VND	1,002,617 VND Special Price On Sale Till 31/03/2025	1,124,833 VND	640,050 VND	1,502,545 VND	2,228,161 VND	1,094,803 VND	2,036,667 VND	1,124,833 VND Special Price On Sale Till 31/03/2025	1,451,616 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	Same day or more	Same day or more	17 Day(s) or more	17 Day(s) or more	Same day or more	7 Day(s) or more	4 Day(s) or more	Quote	6 Day(s) or more	8 Day(s) or more	6 Day(s)	9 Day(s)	6 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	10 Day(s)	24 Day(s) or more	9 Day(s)	6 Day(s)	9 Day(s)	6 Day(s) or more	6 Day(s) or more	9 Day(s)	Quote	6 Day(s) or more	8 Day(s) or more	Quote	4 Day(s)	Quote	17 Day(s) or more	Quote	6 Day(s) or more	8 Day(s) or more	6 Day(s)	6 Day(s)	6 Day(s) or more	8 Day(s) or more	Quote	6 Day(s) or more	9 Day(s)
Screw size (Nominal)	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○]	High Hardness Steel (50-60 HRC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Pitch (P), Number of Threading(mm)	2	0.5 ～ 2	1 ～ 2	1.5 ～ 2	1 ～ 2	0.5 ～ 2	2	1 ～ 2	1 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	1 ～ 1.5	0.5 ～ 2	1 ～ 2	0.5 ～ 2	1.5 ～ 2	1 ～ 2	1.5 ～ 2	1.5 ～ 2	2	2	1.5 ～ 2	2	1.5 ～ 2	1 ～ 2	1.5 ～ 2	1.5	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	2	1.5 ～ 2	2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	2	2	1 ～ 2	1.5 ～ 2	1.5 ～ 2	1 ～ 2	1 ～ 2
Tool Material Type	-	High-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	-	Cobalt HSS	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Alloy HSS	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Alloy HSS	Powder high-speed steel	Alloy HSS	High-speed steel	Carbide	High-speed steel	Cobalt HSS	Alloy HSS	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel
Tap Type	Hand Tap	Hand Tap	Spiral Tap	Point tap	Spiral Tap	Hand Tap	Point tap	Spiral Tap	Point tap	Roll tap	Hand Tap	Point tap	Hand Tap	Die	Spiral Tap	Die	Spiral Tap	Spiral Tap	Spiral Tap	Roll tap	Hand Tap	Spiral Tap	Point tap	Spiral Tap	Die	Point tap	Spiral Tap	Hand Tap	Hand Tap	Spiral Tap	Hand Tap	Spiral Tap	Point tap	Point tap	Spiral Tap	Point tap	Spiral Tap	Hand Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Hand Tap
Hole type	-	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	-	For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	-	For blind hole	-	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	-	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole
Chamfer threads (Lcf)	1.5P ～ 9P	1.5P ～ 5P	2.5P	5P	2.5P	1.5P ～ 9P	-	2.5	5P	2P ～ 4P	1.5P ～ 5P	5	1.5P ～ 4P	-	2.5P	-	2.5P	2.5P	2.5	2P	-	-	5P	2.5P	-	5P	2.5	5P	3P	2.5P	2.5P ～ 5P	2.5P	5	5P	2.5P	4P	2.5P	1.5P ～ 5P	5P	2.5	2.5P	1.5P	3P	5P	1.5P ～ 5P
Coating Type	-	-	Other	Non-Coated	Non-Coated	Non-Coated	-	TiN / Homo	Other	TiN	TiN	Homo	-	-	-	Non-Coated	Non-Coated	Non-Coated	TiN / Homo	TiCN	Non-Coated	TiN	-	-	-	Other	TiCN	Nitriding Treatment	Other	-	-	-	Homo	-	Non-Coated	Non-Coated	-	-	-	Non-Coated / Homo	Other	Non-Coated	Non-Coated	-	-
Coating Y/N	-	NA	Available	NA	NA	NA	-	Available / NA	Available	Available	Available	Available	NA	NA	NA	NA	NA	NA	Available / NA	Available	NA	Available	NA	NA	-	Available	Available	Available	Available	NA	NA	Available	Available / NA	NA	NA	NA	NA	NA	NA	Available / NA	Available	NA	NA	NA	NA
Overall Length (L)(mm)	95	95	95	95	95	75 ～ 95	95	95	95	95	95	95	95	-	95	-	95	150 ～ 250	95	95	95	95	95	95	-	150 ～ 200	95	95	95	150 ～ 250	95	95	95	95	95	95	95	95	95	120 ～ 150	150 ～ 200	95	95	95	150 ～ 200

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

NPT-1-11-1-2

No.0

No.0UN

NO.0-80UNF

No.10

No.1

No.1UN

No.10UN

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12UN

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

No.2UN

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

No.3UN

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

No.4UN

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

No.5UN

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

0.6

No.6

No.6UN

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

No.8

No.8UN

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1

1"

1UN

1UNS

G1

M1

NPS1

NPT1

NPT 1"

NPTF1

PF1

PF 1

PF 1"

PS1

PS 1

PS 1"

PT1

PT1"

PT 1

PT 1"

R1

Rp1

S1

UNC1

UNF1

W1

1"-12

1'-11.5

1'-11

PF1-11

PT1-11

1-8UNC

1"-8

1"-8UNC

PS1-1/2

PS1-1/4

1 1/2

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

NPT 1"1/2

PF 1"1/2

PS1"1/2

PT1"1/2

PT 1 1/2

R1"1/2

W1"1/2

1'1/2-11

1 1/2-8UN

1 1/4

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

PF 1"1/4

PS1"1/4

PT1"1/4

PT 1 1/4

PT 1"1/4

R1"1/4

W1"1/4

1'1/4-11.5

1'1/4-11

1 1/4-8UN

1 1/8

1"1/8UN

G1"1/8

PS1"1/8

R1"1/8

W1"1/8

1'1/8-11

1 1/8-8UN

1 1/16

1"1/16UN

1/2

1/2UN

G1/2

NPS1/2

NPT1/2

NPT 1/2

NPTF1/2

PF1/2

PF 1/2

PS1/2

PS 1/2

PT1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC1/2

UNF1/2

W1/2

1/2-20

1/2-20UNF

1/2-14

PF1/2-14

PT1/2-14

1/2-13

1/2-13UNC

1/2-12

1/2-12W

1/2(1/16'-1/2)

1/2W12

1/2 - 13

1/2 - 20

1 3/4

1"3/4UN

G1"3/4

R1"3/4

W1"3/4

1'3/4-11

1 3/4-8UN

1"3/4-5UNC

1 3/8

1"3/8UN

G1"3/8

PS1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

1/4UNJ

G1/4

NPS1/4

NPT1/4

NPT 1/4

NPTF1/4

PF1/4

PF 1/4

PS1/4

PS 1/4

PT1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC1/4

UNF1/4

W1/4

1/4-28

1/4-28UNF

1/4-20

1/4-20UNC

1/4-19

PF1/4-19

PT1/4-19

1/4-18

1/4(1/16'-1/4)

1/4 - 20

1/4W20

1 5/8

W1"5/8

1 5/8-8UN

M1 to 6

W1"7/8

1 7/8-8UN

1" - 8

1'W8

1/8

G1/8

NPS1/8

NPT1/8

NPT 1/8

NPTF1/8

PF1/8

PF 1/8

PS1/8

PS 1/8

PT1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-40W

1/8-28

PF1/8-28

PT1/8-28

1/8-27

1/8-18

M1 to 10

1 12

1" - 12

1" - 14

1/16

G1/16

NPS1/16

NPT1/16

NPT 1/16

PT1/16

PT 1/16

R1/16

1/16-28

1/16-27

1 20

M1.1

M1.2

S1.2

1.25

M1.4

S1.4

1.5

M1.6

M1.7

M1.8

2

2UN

G2

M2

M2.0

NPS2

NPT2

NPT 2"

PF 2"

PS 2

PS 2"

PT2"

PT 2

PT 2"

R2

W2

W/2

NO 2-56

2'-11.5

2'-11

2-8UN

2'1/2-11

W2"1/4

2'1/4-11

2~2.5

2 4.5

M2 to 4.5

M2.2

M 2.2

M2.3

M2.5

M2.6

3

3M

M3

M3.0

M 3

M 3.0

STI M3

3'-11

PS3-8-19

NPT3-8-18

3/4

3/4UN

G3/4

NPS3/4

NPT3/4

NPT 3/4

NPTF3/4

PF3/4

PF 3/4

PS3/4

PS 3/4

PT3/4

PT 3/4

R3/4

Rp3/4

UNC3/4

UNF3/4

W3/4

3/4-16

3/4-16UNF

3/4-14

PF3/4-14

PT3/4-14

3/4-10

3/4-10UNC

3/4 - 10

3/4W10

3/4 - 16

3/8

3/8-UNJ

3/8UN

G3/8

NPS3/8

NPT3/8

NPT 3/8

NPTF3/8

PF3/8

PF 3/8

PS3/8

PS 3/8

PT3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC3/8

UNF3/8

W3/8

3/8-24

3/8-24UNF

3/8-19

PF3/8-19

PT3/8-19

3/8-18

3/8-16

3/8-16UNC

3/8 - 16

3/8W16

3/8 - 24

3~10

M3 to 10

3/16

SM3/16

W3/16

3/16-32SM

3/16-24W

3/32

SM3/32

# 3 - 48

# 3 - 56

3.5

M3.5

M3.5

4

4M

M4

M4.0

M 4

M 4.0

STI M4

NO 4-40

M4 to 6

M4 to 13

# 4 - 40

# 4 - 48

M4.5

M4.5

5

5M

M5

M5.0

M5

M 5

M 5.0

STI M5

5/8

5/8UN

G5/8

NPS5/8

PS5/8

PT5/8

R5/8

UNC5/8

UNF5/8

W5/8

5/8-18

5/8-18UNF

5/8-14

5/8-11

5/8-11UNC

5/8 - 11

5/8W11

5/8 - 18

M5 to 10

M5-M12

M5 to 13

5/16

5/16UN

5/16UNJ

UNC5/16

UNF5/16

W5/16

5/16-24

5/16-24UNF

5/16-18

5/16-18UNC

5/16 - 18

5/16W18

5/16 - 24

5/32

W5/32

5/32-36 UNC

5/32-32W

# 5 - 40

5/64

5.5M

M5.5

M5.5

6

M6

M6.0

M 6

M 6.0

STI M6

No6-40UNF

6-32UNC

NO 6-32

M6 to 20

# 6 - 32

# 6 - 40

M7

M7.0

M7

M 7.0

PG7

7/8

7/8UN

G7/8

NPS7/8

PS7/8

PT7/8

R7/8

UNC7/8

UNF7/8

W7/8

7/8-14

7/8-14UNF

7/8-9

7/8-9UNC

7/8- 9

7/8W9

7/8- 14

7/16

7/16UN

UNC7/16

UNF7/16

W7/16

7/16-20

7/16-20UNF

7/16-14UNC

7/16 - 14

7/16W14

7/16 - 20

7/32

SM7/32

7/32-24W

7/64

7.5

8

#8

M8

M8.0

M 8

M 8.0

STI M8

8-32UNC

NO 8-32

# 8 - 32

# 8 - 36

9

M9

M9

PG9

9/16

9/16UN

UNF9/16

W9/16

9/16-18

9/16-18UNF

9/16-12

9/16-12UNC

9/16 - 12

9/16 - 18

SM9/32

9/64

SM9/64

10

M10

M10.0

M10

STI M10

Tr 10

10-32UNF

NO 10-32

NO 10-24

M10 to 13

#10 - 24

M10 to 25

#10 - 32

M11

M11

PG11

11/2

NPT 11/2

PF 11/2

PS 11/2

PT 11/2

11/4

NPT 11/4

PF 11/4

PS 11/4

PT 11/4

11/8

11/16

11~24

SM11/32

11/64

SM11/64

12

M12

M12.0

M12

STI M12

Tr 12

12-1.0-2

#12 - 24

M13

13/4

13/8

13/16

13/32

PG13.5

14

M14

M14.0

M14

Tr 14

M15

15/8

15/64

SM15/64

16

M16

M16.0

M16

PG16

Tr 16

M17

17/8

17/16

17/32

17/64

18

M18

M18.0

M18

Tr 18

M19

M19 to 32

M19 to 38

20

M20

M20.0

M20

Tr 20

M21

PG21

22

M22

M22.0

M22

M22X

Tr 22

22-1.0

M23

24

M24

M24.0

M24

M24X

Tr 24

24-2.0-2

25

M25

M25X

Tr 25

M25 to 50

M25 to 70

M26

Tr 26

M27

M27.0

27~36

M28

Tr 28

PG29

30

M30

M30.0

Tr 30

M32

33

M33

M34

M35

36

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M46

M48

M50

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
ClearTrống

Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
ClearTrống

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
ClearTrống

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00

0.8

0.9

1

1-1/8-7~1-1/26

1.2

1.25

1.5

1.7

1.75

2

2-56~8-32

2.5

3

3/8-16~1-8

3.5

4

4 1/2 UNC

4.5

5

5 UNC

5.5

6

6 UNC

7

7 UNC

8

8 UNC

8 UNS

8DØ

8J UNS

9

9 UNC

10

10 UNC

10-24~5/16-18

10、11、12、14、16、18、20、24F

11

11 UNC

11 1/2

11 1/2DØ

11.5

12

12 UNF

12 UNS

13

13 UNC

14

14 UNC

14 UNF

14 UNS

14DØ

16

16 UNC

16 UNF

16UNC

18

18 UNC

18 UNF

18DØ

19

20

20 UNC

20 UNF

20UNC

24

24 UNF

27

27DØ

28

28 UNF

32

32UNC

36

40

44

48

56

64

72

80

100

150
ClearTrống

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
Details

ClearTrống

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-cutting-related tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
ClearTrống

Hole type
- For through hole
- For blind hole
ClearTrống

Chamfer threads (Lcf)
1P

1.5

1.5P

2P

2.5

2.5P

3

3P

3.5

3.5P

4

4P

4.5P

5

5P

5.5P

6P

7P

8P

9P

10P

11P

12P

13P

14P

16P

18P

20P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

29P

30P

31P
Drawing

ClearTrống

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
- Homo
- Steam homo
- Non-homo
Details

ClearTrống

Coating Y/N
- Available
- NA
ClearTrống

Overall Length (L)(mm)
2.5

2.8

3.2

3.6

4

4.5

5

5.6

6

6.3

7

8

8U

9

10

11

11.2

12.5

14

16

18

20

22

22U

27

27U

30

32

33U

34

36

39

40

41

41.5

42

44

45

46

48

49

50

51

52

53

54

55

56

57

58

59

59.5

60

61

61.5

62

63

64

65

66

67

68

69

70

70/70/70

71

72

73

74

75

75.5

76

78

79

80

81

82

84

85

85 x 60

86

87

88

89

90

92

93

94

95

96

99

100

101

102

103

105

108

109

110

111

112

114

115

118

119

120

121

122

125

127

130

135

136

140

145

146

148

150

153

155

159

160

162

163

165

170

175

180

185

190

195

200

210

220

225

230

250

255

260

270

280

290

300

310

315

350

375

390

460

500

525

590

780

890

900

1000

1250
Drawing

ClearTrống

Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools

- MISUMI Home
- Cutting Tools

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

Screw-Hole-Related Tools（Screw size (Nominal)：M16）

Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều