(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
26 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Pointed Tap Series, General Purpose EX-POT
OSG
It is used for general purposes and is suitable for work materials in which cutting chips are continuously coiled in carbon steel, steel alloy and non-ferrous metals. The cutting chips are pushed forward reliably, so there is no risk of cutting chip damage.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | 0.25 | Vanadium High-Speed Steel | Point tap | For through hole | 5P | Non-Coated | NA | 32 |
From: 614,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 2P ~ 4P | TiCN | Available | 32 |
From: 813,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Solid Die D for Metric Threads
YAMAWA MFG
Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | - | 0.2 ~ 0.25 | High-speed steel | Die | - | - | - | NA | - |
From: 1,475,593 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Suitable for steel and non-ferrous alloys. High-speed cutting is possible, durability is greatly improved, and highly efficient tapping is possible.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | Vanadium High-Speed Steel | Roll tap | For blind hole | 2P ~ 4P | TiN | Available | 32 |
From: 657,216 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
High-speed steel hand tap.Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | Non-Coated | NA | 32 |
From: 563,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | High-speed steel | Spiral Tap | For blind hole | 2.5P | - | NA | 36 |
From: 601,005 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 8 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.2 ~ 0.25 | High-speed steel | Hand Tap | For through hole / For blind hole | 1.5P ~ 5P | - | NA | 36 |
From: 480,206 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Dry Tapping, Coated_OL+RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | Powder high-speed steel | Roll tap | For through hole | 4P | TiCN | Available | 36 |
From: 760,895 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 1P | TiCN | Available | 32 |
From: 799,451 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Vanadium High-Speed Steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiCN | Available | 32 |
From: 836,666 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | High-speed steel | Point tap | For through hole | 5P | - | NA | 36 |
From: 591,356 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 22 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Tap Short Chamfer type_EX-SC-SFT
OSG
The chamfer length is 1.5-tooth. It is ideal when the effective screw length cannot be secured with a blind hole and a spiral flute tap for general use with a 2.5-tooth chamfer length.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | 0.25 | Vanadium High-Speed Steel | Spiral Tap | For blind hole | 1.5P | Non-Coated | NA | 32 |
From: 666,666 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 2P ~ 4P | TiCN | Available | 60 |
From: 1,198,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | High-speed steel | Roll tap | For through hole / For blind hole | 2P ~ 4P | TiN | Available | 36 |
From: 732,208 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | High-speed steel | Roll tap | For through hole / For blind hole | 2P | - | NA | 36 |
From: 570,453 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | unified | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | Powder high-speed steel | Roll tap | For through hole / For blind hole | 2P | TiCN | Available | 36 |
From: 717,042 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D
YAMAWA MFG
Solid die for difficult-to-cut materials, such as stainless steel, etc.[Features]· Adopts high-speed tool steel (HSS).· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.· Stable male threading can be performed.· Solid type with minimal variation even under harsh cutting condition specifications.[Applications]· Optimal for machining stainless steel and other difficult-to-cut materials.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | - | 0.25 | High-speed steel | Die | - | - | - | NA | - |
From: 1,917,276 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 2P | TiCN | Available | 32 |
From: 881,666 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
Performs high-precision female thread machining on aluminum and aluminum alloys without producing cutting chips by plastic deformation.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | 0.25 | Vanadium High-Speed Steel | Roll tap | For through hole / For blind hole | 2P | Non-Coated | NA | 32 |
From: 736,667 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | 0.25 | High-speed steel | Roll tap | For through hole / For blind hole | 4P | Non-Coated | NA | 32 |
From: 430,648 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | 0.2 ~ 0.25 | High-speed steel | Roll tap | - | 1P ~ 4P | Other | Available | 32 |
From: 1,040,850 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.2 ~ 0.25 | High-speed steel | Roll tap | - | 1P ~ 4P | TiCN | Available | 32 |
From: 1,040,850 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 1P | TiCN | Available | 36 |
From: 702,780 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps 1.5P_SP-1.5P
YAMAWA MFG
■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | 0.25 | High-speed steel | Spiral Tap | For blind hole | 1.5P | - | - | 36 |
From: 740,041 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Threading with plastic processing does not generate chips and produces high-precision threads with a clean finish without any problems or blade chipping troubles.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | - | 0.25 | High-speed steel | Die | - | - | - | NA | - |
From: 2,842,204 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.· Demonstrates effectiveness for roll tap machining of stainless steel.· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.
Screw size (Nominal) | Screw Types | work material | Pitch (P), Number of Threading(mm) | Tool Material Type | Tap Type | Hole type | Chamfer threads (Lcf) | Coating Type | Coating Y/N | Overall Length (L)(mm) |
---|---|---|---|---|---|---|---|---|---|---|
M1.2 | Meter | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | 0.25 | Powder high-speed steel | Roll tap | For blind hole | 2P | Other | Available | 36 |
From: 845,157 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | YAMAWA MFG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | YAMAWA MFG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | TANOI MFG | TANOI MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
Product SeriesDòng sản phẩm | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | |||||||||||||||||||||||
From | 614,999 VND | 813,333 VND | 1,475,593 VND | 657,216 VND | 563,333 VND | 601,005 VND Special Price On Sale Till 31/03/2025 | 480,206 VND Special Price On Sale Till 31/03/2025 | 760,895 VND | 799,451 VND | 836,666 VND | 591,356 VND Special Price On Sale Till 31/03/2025 | 666,666 VND | 1,198,333 VND | 732,208 VND | 570,453 VND | 717,042 VND | 1,917,276 VND | 881,666 VND | 736,667 VND | 430,648 VND | 1,040,850 VND | 1,040,850 VND | 702,780 VND | 740,041 VND | 2,842,204 VND | 845,157 VND |
Days to ShipSố ngày giao hàng | Quote | Quote | 9 Day(s) or more | 6 Day(s) or more | Quote | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | Quote | 22 Day(s) | Quote | Quote | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | Quote | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 8 Day(s) |
Screw size (Nominal) | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 | M1.2 |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 0.25 | 0.25 | 0.2 ~ 0.25 | 0.25 | 0.25 | 0.25 | 0.2 ~ 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.2 ~ 0.25 | 0.2 ~ 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
Tool Material Type | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel |
Tap Type | Point tap | Roll tap | Die | Roll tap | Hand Tap | Spiral Tap | Hand Tap | Roll tap | Roll tap | Roll tap | Point tap | Spiral Tap | Roll tap | Roll tap | Roll tap | Roll tap | Die | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Die | Roll tap |
Hole type | For through hole | For blind hole | - | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For blind hole | For blind hole | - | For blind hole |
Chamfer threads (Lcf) | 5P | 2P ~ 4P | - | 2P ~ 4P | 1.5P ~ 5P | 2.5P | 1.5P ~ 5P | 4P | 1P | 2P ~ 4P | 5P | 1.5P | 2P ~ 4P | 2P ~ 4P | 2P | 2P | - | 2P | 2P | 4P | 1P ~ 4P | 1P ~ 4P | 1P | 1.5P | - | 2P |
Coating Type | Non-Coated | TiCN | - | TiN | Non-Coated | - | - | TiCN | TiCN | TiCN | - | Non-Coated | TiCN | TiN | - | TiCN | - | TiCN | Non-Coated | Non-Coated | Other | TiCN | TiCN | - | - | Other |
Coating Y/N | NA | Available | NA | Available | NA | NA | NA | Available | Available | Available | NA | NA | Available | Available | NA | Available | NA | Available | NA | NA | Available | Available | Available | - | NA | Available |
Overall Length (L)(mm) | 32 | 32 | - | 32 | 32 | 36 | 36 | 36 | 32 | 32 | 36 | 32 | 60 | 36 | 36 | 36 | - | 32 | 32 | 32 | 32 | 32 | 36 | 36 | - | 36 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy