(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
134 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Micro Drill Reamer, Type-N 701
GUHRING
[Features]· Blade diameter tolerance is +0, -0.004, suitable for high precision small diameter hole drilling.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.25 ~ 1.4 | 25 | 1.9 ~ 9.5 | Titanium[○] | - | Carbide | NA | NA | - |
From: 697,336 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super U Drill - Cylindrical Shank
SANDVIK
With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12 ~ 12.7 | 125 ~ 129 | 63 ~ 66 | Titanium[○] | End Mill Shank | - | NA | - | - |
From: 19,660,111 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Top Solid Tapered Shank Twist Drill DTD
DIJET
[Features]· It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
6 ~ 30 | 148 ~ 305 | 68 ~ 188 | Titanium[○] | Taper shank | Carbide | NA | NA | Non-Coated |
From: 5,820,250 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORES
[Features] ・It is for general use and appropriate for wide workpieces including soft steel, alloy steel, cast iron, stainless steel, titanium, inconel, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 13 | 30 ~ 152 | - | Titanium[○] | straight shank | High-speed steel | NA | Available | Homo |
From: 23,023 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
Indexable drill that can stably perform hole drilling with 2D depth.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
21 ~ 33.5 | 121 ~ 160 | - | Titanium[○] | End Mill Shank | Carbide | Available | NA | Non-Coated |
From: 8,206,743 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole Pilot AQDEXOHPLT
NACHI(FUJIKOSHI)
[Features]· Drill for drilling guide holes.· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1.015 ~ 12.03 | 54 ~ 122 | 3.3 ~ 54 | Titanium[○] | straight shank | Carbide | Available | Available | For General Steels (AlCrN, etc.) |
From: 2,154,830 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]· Capable of high-efficiency machining on steel and cast iron.· Allows non-step boring up to hole depth 5D.· Cannot be used for austenitic stainless steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 12.9 | 34 ~ 151 | 12 ~ 101 | Titanium[○] | straight shank | Cobalt HSS | NA | Available | For General Steels (AlCrN, etc.) |
From: 204,283 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Throw-Away Drill, Standard GEN2 3 Series Tip
NGK SPARK PLUG
NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard GEN2 Tip for 3 Series
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
35.5 ~ 47.5 | - | - | Titanium[○] | - | Powder high-speed steel | - | Available | For General Steels (AlCrN, etc.) |
From: 2,516,948 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A
OKAZAKI SEIKO
[Features]· Ideal for machining stainless steel and other difficult-to-cut materials.・ It achieves smooth cutting chip discharge with tip shape and flute shape[Specifications]· Coolant through specification (with OH)· For 5D
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.85 ~ 11.85 | - | - | Titanium[◎] | End Mill Shank | Carbide | Available | Available | TiAlN |
From: 1,528,985 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
G Short Tapered Shank Drill GTS
NACHI(FUJIKOSHI)
Taper type straight shank drill with a TiN coated surface.[Features]· The original thinning shape (3-rake) improves centripedality and chip separation.· TiN coating achieves longer life.[Applications]· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
7 ~ 32 | 126 ~ 235 | 45 ~ 114 | Titanium[○] | - | Cobalt HSS | - | Available | TiN |
From: 1,486,133 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D
OSG
Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.02 ~ 0.08 | 38 | 0.12 ~ 0.48 | Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 2,781,953 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EX-GOLD Drills Regular with Internal Coolant Supply_EX-HO-GDR
OSG
Thanks to the oil hole, high-efficiency processing and long service life are achieved, making it effective for difficult-to-machine materials such as stainless steel
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
6 ~ 40 | 101 ~ 270 | 57 ~ 180 | Titanium[○] | End Mill Shank / straight shank | Cobalt HSS | Available | Available | TiN |
From: 2,135,194 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 2 | 38 | 1.5 ~ 10 | Titanium[○] | End Mill Shank | Carbide | NA | Available | TiCN |
From: 473,504 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ A short type with a groove length that is 6 times the cutting diameter for stable machining. Uses thinning on the tip to reduce cutting force.・ Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.05 | 40 | 0.06 ~ 0.3 | Titanium[○] | End Mill Shank | Carbide | NA | NA | - |
From: 2,203,652 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)
NS TOOL
With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 40 | 0.015 ~ 0.2 | Titanium[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,228,120 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-D, for 8D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13.5 or more and 14.5 or less ~ Over 41.0, and 42.5 or less | 191.5 ~ 460 | 124.5 ~ 360 | Titanium[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 11,601,537 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 62 ~ 131 | 20 ~ 79 | Titanium[○] | End Mill Shank | Carbide | Available | Available | Other |
From: 2,128,309 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Shank Drill, Stub GV120 363
GUHRING
This drill is ideal for stainless steel machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
8.3 ~ 33 | 130 ~ 269 | 49 ~ 120 | Titanium[○] | Taper shank | Cobalt HSS | NA | Available | Other |
From: 1,843,171 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GUHRING
Small diameter solid carbide drill. [Features] ·micro series. [Applications] ·Ideal for processing curable plastics, plastic plastics, carbon fiber, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 1.4 | 38 | 8.5 ~ 17 | Titanium[○] | - | Carbide | NA | NA | - |
From: 616,458 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EZ Drill for Use with Heat-Resistant Alloy (EZS Type)
DIJET
[Features]· It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.2 ~ 11.9 | 71 ~ 122 | 18 ~ 60 | Titanium[◎] | End Mill Shank | Carbide | Available | Available | - |
From: 3,243,315 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORES
[Features] ・It is designed appropriately for wide workpieces and optimized for special steel, special alloy steel, cast iron, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 58 | 198 ~ 445 | - | Titanium[○] | Taper shank | High-speed steel | NA | Available | Homo |
From: 395,236 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ORES
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
13 ~ 40 | 250 ~ 500 | - | Titanium[○] | Taper shank | High-speed steel | NA | Available | Steam homo |
From: 908,659 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill
SANDVIK
[Features]General Purpose High Performance Carbide Solid Drill· Coolant Through
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.35 ~ 6.9 | 142 | - | Titanium[○] | End Mill Shank | Carbide | Available | Available | Other |
From: 2,471,400 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (8D Type)_ADO-8D
OSG
[Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 80 ~ 206 | 33 ~ 143 | Titanium[○] | End Mill Shank | Carbide | Available | Available | Other |
From: 2,863,725 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VariDrill Solid Carbide Drill 8xD VDS403A
WIDIA
WIDIA Straight Shank, End Mill Shank Drill (Carbide) VariDrill Solid Carbide Drill 8xD VDS403A.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1.5 ~ 20 | 58 ~ 200 | 18 ~ 148 | Titanium[○] | End Mill Shank | Carbide | Available | Available | TiAlN |
From: 3,716,140 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MARVEL
Excellent sharpness, amazing durability [Features] · The tip shape was designed with an emphasis of cutting ability and ensures good engagement with the workpiece as well as good centripetal performance. Allows for quick drilling work. [Applications] · For drilling holes in stainless steel and difficult-to-cut materials.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | - | Titanium[○] | straight shank | Cobalt HSS | - | - | - |
From: 222,516 VND |
---|
Days to Ship: Số ngày giao hàng: 16 Day(s) |
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.02 ~ 0.08 | 38 | 0.22 ~ 0.88 | Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 3,279,970 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
Supports high-precision drilling in collaboration with UVM-DRL.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.05 | 38 | 0.075 | Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 6,248,145 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EX-GOLD Drills Stub with Long Shank for General Application_EX-LS-GDS
OSG
Suitable for horizontal machines that require reach, and for machining parts near walls and jigs.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.3 ~ 8.5 | 100 ~ 200 | 18 ~ 37 | Titanium[○] | straight shank | Cobalt HSS | NA | Available | TiN |
From: 568,371 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VP-GOLD Drills Short with Internal Coolant Supply_VP-HO-GDS
OSG
The powder metal high-speed steel with lubrication hole + V coating enables high-speed machining that exceeds that of a carbide drill.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
6 ~ 26 | 72 ~ 158 | 28 ~ 78 | Titanium[◎] | End Mill Shank / straight shank | Powder high-speed steel | Available | Available | Other |
From: 2,826,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GOLD Drills V coated Medium with Morse Taper Shank_V-MT-GDN
OSG
A V coated taper shank and medium type drill bit that is easy to use on a lathe, with particular attention to low thrust.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
6 ~ 32 | 123 ~ 248 | 43 ~ 128 | Titanium[○] | End Mill Shank | High Vanadium HSS | NA | Available | Other |
From: 2,033,735 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 38 ~ 80 | 4.5 ~ 45 | Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 848,058 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NSPD Micro Point Drill (Pilot Hole Machining)
NS TOOL
[Features]・ Supports pilot hole machining with micro drill bits.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.025 or more)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 40 | 0.015 ~ 0.2 | Titanium[○] | End Mill Shank | Carbide | NA | NA | - |
From: 974,335 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ Achieved standardization from tip diameter ø0.01.・ Pioneering a new area of drilling with a drill bit.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)・ A standard type with a groove length that is 10 times the cutting diameter.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 40 | 0.1 ~ 1 | Titanium[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 939,139 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
[Features]・ Drilling of hardened steel 65 HRC is possible with a small diameter drill bit.・ Achieves stable lifespan with little variation in hole diameter.・ High hardness material drilling is possible from ø0.1.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1 | 45 | 0.2 ~ 2 | Titanium[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,157,606 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
NSMD-M MUGEN Micro Coating Micro Drill
NS TOOL
[Features]・ A standard type with a groove length that is 10 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 40 | 0.1 ~ 1 | Titanium[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,228,120 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
NS TOOL
[Features]・ MUGEN miniature drill pilot hole drill. Can also be used for drilling thin plates.・ The use of thinning improves hole position precision and enables stable drilling.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1 | 38 | 0.2 ~ 2 | Titanium[○] | End Mill Shank | Carbide | - | Available | TiAlN |
From: 1,174,022 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
PHP Carbide Drill, Phoenix Drill
OSG
An indexable drill with excellent cutting chip discharge and high machining efficiency. Cost-effective with 4-corner type insert.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
14 ~ 40 | 116 ~ 227 | 42 ~ 120 | Titanium[○] | End Mill Shank / straight shank | Carbide | NA | NA | Non-Coated |
From: 13,474,110 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]· Taking on ultra-high speed machining.· 0.25 seconds per hole, lifetime of 20,000 or more holes.· Allows non-step boring up to 3D hole depth (up to 7D in some situations).· High precision and super long life.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 40 ~ 60 | 1.9 ~ 18.5 | Titanium[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 692,649 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TFD Carbide TiCN Coated Drill Bit
IWATA TOOL
Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 50 | 1.8 ~ 16.8 | Titanium[○] | End Mill Shank | Carbide | NA | Available | TiCN |
From: 1,163,793 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Twisted Crescent Drill Bit Carbide
IWATA TOOL
Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 50 | 0.6 ~ 16.8 | Titanium[○] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 786,878 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Twisted Crescent Drill Bit Carbide DLC Coated
IWATA TOOL
Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 50 | 0.6 ~ 16.8 | Titanium[○] | End Mill Shank | Carbide | NA | Available | DLC |
From: 1,352,250 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-M, for 3D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 105 ~ 230 | 44 ~ 135 | Titanium[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 8,048,584 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 8D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.8 | 81 | 33 | Titanium[◎] | End Mill Shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,446,085 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
7 | 109 | 56 | Titanium[◎] | straight shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,466,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Overall Length L(mm) |
Groove Length L(mm) |
work material |
Shank Type |
Tool Material Type |
With/without Oil Hole |
Coating Y/N |
Coating Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | GUHRING | SANDVIK | DIJET | ORES | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NGK SPARK PLUG | OKAZAKI SEIKO | NACHI(FUJIKOSHI) | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | SUMITOMO ELECTRIC HARDMETAL | GUHRING | GUHRING | GUHRING | DIJET | ORES | ORES | SANDVIK | OSG | WIDIA | MARVEL | OSG | OSG | OSG | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | OSG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
Product SeriesDòng sản phẩm | Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A | Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D | EX-GOLD Drills Regular with Internal Coolant Supply_EX-HO-GDR | NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining) | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | EX-GOLD Drills Stub with Long Shank for General Application_EX-LS-GDS | ||||||||||||||||||||||||||||||||||||||
From | 697,336 VND | 19,660,111 VND | 5,820,250 VND | 23,023 VND | 8,206,743 VND | 2,154,830 VND | 204,283 VND | 2,516,948 VND | 1,528,985 VND | 1,486,133 VND | 2,781,953 VND | 2,135,194 VND | 473,504 VND | 2,203,652 VND | 1,228,120 VND | 11,601,537 VND | 2,128,309 VND | 1,843,171 VND | 616,458 VND | 3,243,315 VND | 395,236 VND | 908,659 VND | 2,471,400 VND | 2,863,725 VND | 3,716,140 VND | 222,516 VND | 3,279,970 VND | 6,248,145 VND | 568,371 VND | 2,826,270 VND | 2,033,735 VND | 848,058 VND | 974,335 VND | 939,139 VND | 1,157,606 VND | 1,228,120 VND | 1,174,022 VND | 13,474,110 VND | 692,649 VND | 1,163,793 VND | 786,878 VND | 1,352,250 VND | 8,048,584 VND | 3,446,085 VND | 3,466,800 VND |
Days to ShipSố ngày giao hàng | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 16 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Hole diameter (drill diameter) D(mm) | 0.25 ~ 1.4 | 12 ~ 12.7 | 6 ~ 30 | 0.5 ~ 13 | 21 ~ 33.5 | 1.015 ~ 12.03 | 1 ~ 12.9 | 35.5 ~ 47.5 | 3.85 ~ 11.85 | 7 ~ 32 | 0.02 ~ 0.08 | 6 ~ 40 | 0.3 ~ 2 | 0.01 ~ 0.05 | 0.01 ~ 0.1 | 13.5 or more and 14.5 or less ~ Over 41.0, and 42.5 or less | 3 ~ 20 | 8.3 ~ 33 | 0.5 ~ 1.4 | 3.2 ~ 11.9 | 13 ~ 58 | 13 ~ 40 | 3.35 ~ 6.9 | 3 ~ 13 | 1.5 ~ 20 | - | 0.02 ~ 0.08 | 0.05 | 3.3 ~ 8.5 | 6 ~ 26 | 6 ~ 32 | 0.3 ~ 3 | 0.01 ~ 0.1 | 0.01 ~ 0.1 | 0.1 ~ 1 | 0.01 ~ 0.1 | 0.1 ~ 1 | 14 ~ 40 | 0.3 ~ 3 | 0.3 ~ 3 | 0.1 ~ 3 | 0.1 ~ 3 | 12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 2.8 | 7 |
Overall Length L(mm) | 25 | 125 ~ 129 | 148 ~ 305 | 30 ~ 152 | 121 ~ 160 | 54 ~ 122 | 34 ~ 151 | - | - | 126 ~ 235 | 38 | 101 ~ 270 | 38 | 40 | 40 | 191.5 ~ 460 | 62 ~ 131 | 130 ~ 269 | 38 | 71 ~ 122 | 198 ~ 445 | 250 ~ 500 | 142 | 80 ~ 206 | 58 ~ 200 | - | 38 | 38 | 100 ~ 200 | 72 ~ 158 | 123 ~ 248 | 38 ~ 80 | 40 | 40 | 45 | 40 | 38 | 116 ~ 227 | 40 ~ 60 | 50 | 50 | 50 | 105 ~ 230 | 81 | 109 |
Groove Length L(mm) | 1.9 ~ 9.5 | 63 ~ 66 | 68 ~ 188 | - | - | 3.3 ~ 54 | 12 ~ 101 | - | - | 45 ~ 114 | 0.12 ~ 0.48 | 57 ~ 180 | 1.5 ~ 10 | 0.06 ~ 0.3 | 0.015 ~ 0.2 | 124.5 ~ 360 | 20 ~ 79 | 49 ~ 120 | 8.5 ~ 17 | 18 ~ 60 | - | - | - | 33 ~ 143 | 18 ~ 148 | - | 0.22 ~ 0.88 | 0.075 | 18 ~ 37 | 28 ~ 78 | 43 ~ 128 | 4.5 ~ 45 | 0.015 ~ 0.2 | 0.1 ~ 1 | 0.2 ~ 2 | 0.1 ~ 1 | 0.2 ~ 2 | 42 ~ 120 | 1.9 ~ 18.5 | 1.8 ~ 16.8 | 0.6 ~ 16.8 | 0.6 ~ 16.8 | 44 ~ 135 | 33 | 56 |
work material | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[◎] |
Shank Type | - | End Mill Shank | Taper shank | straight shank | End Mill Shank | straight shank | straight shank | - | End Mill Shank | - | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | Taper shank | - | End Mill Shank | Taper shank | Taper shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | straight shank |
Tool Material Type | Carbide | - | Carbide | High-speed steel | Carbide | Carbide | Cobalt HSS | Powder high-speed steel | Carbide | Cobalt HSS | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | - | Carbide | Cobalt HSS | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Cobalt HSS | Powder high-speed steel | High Vanadium HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide |
With/without Oil Hole | NA | NA | NA | NA | Available | Available | NA | - | Available | - | NA | Available | NA | NA | NA | Available | Available | NA | NA | Available | NA | NA | Available | Available | Available | - | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | Available | Available | Available |
Coating Y/N | NA | - | NA | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | NA | Available | Available | NA | Available | Available | Available | Available |
Coating Type | - | - | Non-Coated | Homo | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiN | Other | TiN | TiCN | - | TiAlN | For High Hardness (Silicon Group) | Other | Other | - | - | Homo | Steam homo | Other | Other | TiAlN | - | Other | Other | TiN | Other | Other | Other | - | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiCN | Non-Coated | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy