Holding Tools for I.D. Tuning（Page5）

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PDUN11 Type (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	27 ～ 40	Inner diameter profiling	Right-hand / Left-hand	Lever lock	180 ～ 250	-	20 ～ 32	Up to 3	NA

  From: 5,638,216 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PDUN11 Type Twin Hole Bar (Profiling: with Cutting Fluid Hole)

  KYOCERA

  ·Boring bar for negative inserts, for DN inserts.[Features]·Inner Diameter / Deep End Face Processing·Lever lock

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	27 ～ 40	Inner diameter profiling	Right-hand	Lever lock	180 ～ 250	-	20 ～ 32	Up to 3	Available

  From: 6,653,373 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PDZN15 Type (Draw Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	32 ～ 54	Pull	Right-hand / Left-hand	Pin Lock	225 ～ 325	-	25 ～ 40	Up to 3	NA

  From: 6,752,393 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

  KYOCERA

  ·Boring bar for negative inserts, for TN inserts.[Features]·Internal diameter machining·Lever lock

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20	Internal Diameter	Right-hand	Lever lock	150	-	16	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN06 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN08 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  Lever lock type / wedge lock type boring bar.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40	Internal Diameter	Right-hand / Left-hand	Lever lock	250	-	32	Up to 3	NA

  From: 7,212,743 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CELN Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: E (75° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	50	Internal Diameter	Right-hand	Clamp-on	300	-	40	Up to 3	NA

  From: 8,600,815 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUN-A Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	30	Internal Diameter	Right-hand	Clamp-on	220	-	25	-	-

  From: 6,280,460 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge for T-Max P Negative Tip

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	58 ～ 73.7	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

  SANDVIK

  First recommendation for general turning for medium to large partsInserts with breakers and materials for all machining areas

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	0°	16 ～ 50	64 ～ 200	Available

  From: 8,659,311 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max U Fine Boring Unit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand / Left-hand	-	24.1 ～ 33.8	-	16 ～ 20	-	NA

  From: 15,718,877 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter for Small Lathe

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	-	-	-	-	-

  From: 4,856,063 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,670,909 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 ~ 24 ～ 80	Available

  From: 4,380,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	18	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	7°	12	120	NA

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Boring Bit for Negative Tips

  SANDVIK

  T-Max P series turning boring bars for outer diameter turning of large to medium size parts with high productivity

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	32	Internal Diameter	Right-hand	Cable clamp	300	0°	25	37.5 ~ 100	Available

  From: 11,190,428 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Head for CORO-TURN SL CORO-TURN 107

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Right-hand / Left-hand	Screw-on	-	-	16	20	Available

  From: 8,650,546 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Vibration-proof Boring Bit

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	620	-	60	-	Available

  From: 88,609,382 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand / Left-hand	-	32 ～ 55	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Solid Carbide Boring Tool Bit MB-A

  SANDVIK

  [Features]Holder for inner-diameter turning (bore cutting) of small parts. The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity. Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations. Minimum machining diameter: ø10 mm. For small inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	100	-	-	-	-

  From: 4,626,580 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Solid-Carbide Boring Tool Bit MB-E

  SANDVIK

  [Features]Holder for inner-diameter turning (bore cutting) of small parts. The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity. Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations. Minimum machining diameter: ø10 mm. For small inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	87.9 ～ 124.7	-	-	-	-

  From: 7,918,137 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	10	Internal Diameter	Right-hand / Left-hand	Screw-on	125	7°	8	48	Available

  From: 8,293,572 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125	7°	10	15 ~ 40	Available

  From: 4,987,658 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR/L-R

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 22	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	7°	10 ～ 16	60 ～ 96	Available

  From: 10,452,323 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22 ～ 27	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	16 ～ 20	24 ~ 64 ～ 80	Available

  From: 4,924,800 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	7°	12 ～ 16	18 ~ 48 ～ 24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150	7°	12	30 ~ 80	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	33	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	312.2	7°	25	15 ~ 40	Available

  From: 7,005,815 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20	Internal Diameter	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	32 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	300	7°	25 ～ 32	100 ～ 128	Available

  From: 6,111,761 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)

  SANDVIK

  [Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. For inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Right-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...SVUCR/L-E

  SANDVIK

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,986,360 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	27 ～ 33	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	250 ～ 300	5°	20 ～ 25	30 ~ 80 ～ 100	Available

  From: 6,088,471 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 111, Boring Tool Bit for Turning

  SANDVIK

  [Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions·Easy-fix sleeve for quick and accurate core height adjustment[Applications]·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape) / T (Triangle)	10 ～ 32	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	125 ～ 300	11°	8 ～ 25	12 ~ 32 ～ 37.5 ~ 100	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 200	11°	10 ～ 16	15 ~ 40 ～ 24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR/L-ER

  SANDVIK

  CoroTurn 111, a true solution for eliminating vibrations in long overhangs and unstable machining conditionsCarbide boring bit for turning

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	10 ～ 16	60 ～ 96	Available

  From: 10,445,307 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR/L-ER

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 18	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	60 ~ 100 ～ 120	NA

  From: 18,439,052 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L-ER

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	-	-	Right-hand	-	-	11°	16	-	-

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 32	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 300	11°	10 ～ 25	15 ~ 40 ～ 37.5 ~ 100	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	204.6	11°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 200	11°	6 ～ 16	9 ~ 24 ～ 32	Available

  From: 4,335,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	72 ~ 120 ～ 120	NA

  From: 18,461,603 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	S...PDUN11 Type (Profiling)	A...PDUN11 Type Twin Hole Bar (Profiling: with Cutting Fluid Hole)	S...PDZN15 Type (Draw Machining)	A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)	S...PWLN06 Type (Inner Diameter/Inner End Face Machining)	A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)	S...PWLN08 Type (Inner Diameter/Inner End Face Machining)	S...CELN Type (Inner Diameter/Inner End Face Machining)	S...CTUN-A Type (Inner Diameter Machining)	Cartridge for T-Max P Negative Tip	T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN	T-Max U Fine Boring Unit	CoroCut MB Adapter for Small Lathe	CORO-TURN 107 Boring Bit for Positive Tips	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips	CORO-TURN RC, Boring Bit for Negative Tips	Cutting Head for CORO-TURN SL CORO-TURN 107	CORO-TURN SL, Vibration-proof Boring Bit	Cartridge	CoroCut MB Solid Carbide Boring Tool Bit MB-A	CoroCut MB Solid-Carbide Boring Tool Bit MB-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...SVUCR/L-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR/L	CoroTurn 111, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R
From	5,638,216 VND	6,653,373 VND	6,752,393 VND	5,265,301 VND	4,478,038 VND	5,265,301 VND	7,212,743 VND	8,600,815 VND	6,280,460 VND	5,573,567 VND	8,659,311 VND	15,718,877 VND	4,856,063 VND	4,670,909 VND	4,380,354 VND	19,726,421 VND	11,190,428 VND	8,650,546 VND	88,609,382 VND	5,573,567 VND	4,626,580 VND	7,918,137 VND	8,293,572 VND	4,987,658 VND	10,452,323 VND	4,924,800 VND	4,893,027 VND	4,893,027 VND	7,005,815 VND	4,893,027 VND	6,111,761 VND	4,893,027 VND	4,893,027 VND	4,893,027 VND	4,986,360 VND	6,088,471 VND	4,893,027 VND	4,893,027 VND	10,445,307 VND	18,439,052 VND	4,893,027 VND	4,893,027 VND	4,893,027 VND	4,335,541 VND	18,461,603 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s) or more	9 Day(s)	7 Day(s) or more	9 Day(s)	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	9 Day(s) or more	9 Day(s) or more	12 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	C (80° Diamond-Shape)	T (Triangle)	S (Rectangular)	C (80° Diamond-Shape)	-	-	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	-	C (80° Diamond-Shape)	-	-	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	C (80° Diamond-Shape) / T (Triangle)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)
Minimum Processing Diameter φA	27 ～ 40	27 ～ 40	32 ～ 54	20	20 ～ 32	20 ～ 32	40	50	30	50 ～ 70	20 ～ 63	-	-	20	8.5 ～ 25	18	32	20	-	25 ～ 50	-	-	10	15	15 ～ 22	22 ～ 27	16 ～ 20	16	33	20	32 ～ 40	11	22	22	22	27 ～ 33	10 ～ 32	15 ～ 20	15 ～ 20	15 ～ 18	-	15 ～ 32	22	8.5 ～ 20	13 ～ 16
Application	Inner diameter profiling	Inner diameter profiling	Pull	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	-	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	-	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling
Selfishly	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Clamp Shape	Lever lock	Lever lock	Pin Lock	Lever lock	Lever lock	Lever lock	Lever lock	Clamp-on	Clamp-on	Lever lock	Lever lock	-	-	Screw-on	Screw-on	Screw-on	Cable clamp	Screw-on	-	-	-	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on
Overall Length L1	180 ～ 250	180 ～ 250	225 ～ 325	150	150 ～ 200	150 ～ 200	250	300	220	58 ～ 73.7	200 ～ 350	24.1 ～ 33.8	-	200	80 ～ 250	150 ～ 180	300	-	620	32 ～ 55	100	87.9 ～ 124.7	125	125	150 ～ 200	200 ～ 250	150 ～ 200	150	312.2	200	300	125	200	200	200	250 ～ 300	125 ～ 300	125 ～ 200	150 ～ 200	150 ～ 180	-	125 ～ 300	204.6	80 ～ 200	150 ～ 180
Clearance angle	-	-	-	-	-	-	-	-	-	-	0°	-	-	7°	7°	7°	0°	-	-	-	-	-	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	5°	11°	11°	11°	11°	11°	11°	11°	11°	11°
Shank Diameter φD	20 ～ 32	20 ～ 32	25 ～ 40	16	16 ～ 25	16 ～ 25	32	40	25	-	16 ～ 50	16 ～ 20	-	16	6 ～ 20	12	25	16	60	-	-	-	8	10	10 ～ 16	16 ～ 20	12 ～ 16	12	25	16	25 ～ 32	10	16	16	16	20 ～ 25	8 ～ 25	10 ～ 16	10 ～ 16	10 ～ 12	16	10 ～ 25	16	6 ～ 16	10 ～ 12
Protrusion length (L/D)	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	-	-	64 ～ 200	-	-	24 ~ 64	9 ~ 24 ～ 80	120	37.5 ~ 100	20	-	-	-	-	48	15 ~ 40	60 ～ 96	24 ~ 64 ～ 80	18 ~ 48 ～ 24 ~ 64	30 ~ 80	15 ~ 40	24 ~ 64	100 ～ 128	15 ~ 40	24 ~ 64	24 ~ 64	24 ~ 64	30 ~ 80 ～ 100	12 ~ 32 ～ 37.5 ~ 100	15 ~ 40 ～ 24 ~ 64	60 ～ 96	60 ~ 100 ～ 120	-	15 ~ 40 ～ 37.5 ~ 100	24 ~ 64	9 ~ 24 ～ 32	72 ~ 120 ～ 120
Lubrication Hole Y/N	NA	Available	NA	Available	Available	Available	NA	NA	-	NA	Available	NA	-	Available	Available	NA	Available	Available	Available	NA	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	NA	-	Available	Available	Available	NA

Loading...Tải…