Roughing End Mills (HSS)（Coating：TiCN）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 718,360 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill Long SGFREL

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	26 ～ 150	6 ～ 42	3 ～ 6	80 ～ 250	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,903,065 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSα S Coating S-Tech α Nick

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	10 ～ 65	6 ～ 32	4 ～ 6	70 ～ 185	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,203,727 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αM S-Coated Alpha Nick Regular Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	35 ～ 120	10 ～ 42	4 ～ 6	100 ～ 240	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,826,147 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·High speed steel powder roughing long flute length type that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,228,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αL S-Coated Alpha Nick Long Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 50	65 ～ 200	16 ～ 42	4 ～ 6	145 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 4,034,521 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Roughing End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 26	-	6 ～ 25	4 ～ 5	68 ～ 166	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 491,283 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 893,102 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·Long shank type of high speed steel powder that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,042,167 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Heavy SGHV

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,138,022 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Long Shank, SLX Type SGFREU

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	32 ～ 75	16 ～ 42	4 ～ 6	200 ～ 350	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	72 ～ 113	-

  From: 3,698,328 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Heavy Long SGLHV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 145	6 ～ 42	4 ～ 6	60 ～ 230	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,717,165 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Long Shank, SX Type SGFREX

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	32 ～ 75	16 ～ 42	4 ～ 6	170 ～ 280	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	64 ～ 100	-

  From: 3,501,411 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Large Pitch, Medium SGLREM

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 122	6 ～ 42	3 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,688,247 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Regular Length, Short SGFRERS

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 70	6 ～ 42	3 ～ 6	60 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,553,101 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSαM S Coating Estech α Nick Regular Flute

  SANKO MFG

  [Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	15 ～ 120	6 ～ 42	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,625,760 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSα L S Coated Estech α Nick Long Blade

  SANKO MFG

  [Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	30 ～ 150	6 ～ 42	4 ～ 6	80 ～ 250	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,833,730 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSαLS S Coated Estech α Nick Long Shank

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	40 ～ 75	16 ～ 42	4 ～ 6	180 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 2,871,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαS, S Coating Fine Pitch Short Flute

  SANKO MFG

  Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	10 ～ 80	6 ～ 42	4 ～ 6	70 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,189,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	15 ～ 120	6 ～ 42	4 ～ 6	80 ～ 240	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,488,380 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαL S-Coating Fine Pitch Long Flute

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	100 ～ 270	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,445,814 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αS S-Coating α Nick Short Flute

  SANKO MFG

  [Features]· Standard pitch type roughing endmill with TiCN coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	10 ～ 80	6 ～ 42	4 ～ 6	70 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,189,563 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αH S Coating α Nick Hard Type

  SANKO MFG

  Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	8 ～ 75	6 ～ 42	4 ～ 6	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,137,432 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αHM S-Coated Alpha Nick Hard Type Regular Blade

  SANKO MFG

  [Features]· Hard pitch type roughing endmill with S coating.· Ideal for heavy duty groove cutting.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 110	6 ～ 42	4 ～ 6	60 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,247,005 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SUSα S Coating for Stainless Steel Groove Processing

  SANKO MFG

  Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	5 ～ 55	6 ～ 25	3 ～ 4	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○]	Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,079,577 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Roughing End Mill (Uncoated/TIN/TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	60 ～ 214	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available / None	Cobalt HSS	-	Straight

  From: 844,486 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Heavy Extra-Long SGELHV

  NACHI(FUJIKOSHI)

  Adopts an ultra-long blade length. Capable of roughing of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  24 ～ 50	150 ～ 300	25 ～ 42	4 ～ 6	220 ～ 390	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	TiCN	Square	Standard torsion (30-40°)	Available / None	Alloy HSS	-	-

  From: 16,386,415 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Roughing End Mill (TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 29	26 ～ 45	12 ～ 25	6	83 ～ 121	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 1,084,053 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	NACHI(FUJIKOSHI)	SANKO MFG	SANKO MFG	MISUMI	SANKO MFG	OSG KOREA CORP	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OSG KOREA CORP	NACHI(FUJIKOSHI)	OSG KOREA CORP
Product SeriesDòng sản phẩm	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	SG-FAX Roughing End Mill Long SGFREL	SSα S Coating S-Tech α Nick	S-αM S-Coated Alpha Nick Regular Blade	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	S-αL S-Coated Alpha Nick Long Blade	Long Roughing End Mill	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	SG-FAX Heavy SGHV	SG-FAX Roughing End Mill, Long Shank, SLX Type SGFREU	SG-FAX Heavy Long SGLHV	SG-FAX Roughing End Mill, Long Shank, SX Type SGFREX	SG-FAX Roughing End Mill, Large Pitch, Medium SGLREM	SG-FAX Roughing End Mill, Regular Length, Short SGFRERS	SSαM S Coating Estech α Nick Regular Flute	SSα L S Coated Estech α Nick Long Blade	SSαLS S Coated Estech α Nick Long Shank	S-FPαS, S Coating Fine Pitch Short Flute	S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)	S-FPαL S-Coating Fine Pitch Long Flute	S-αS S-Coating α Nick Short Flute	S-αH S Coating α Nick Hard Type	S-αHM S-Coated Alpha Nick Hard Type Regular Blade	S-SUSα S Coating for Stainless Steel Groove Processing	H.S.S Roughing End Mill (Uncoated/TIN/TICN)	SG-FAX Heavy Extra-Long SGELHV	Short Roughing End Mill (TICN)
From	718,360 VND Special Price On Sale Till 31/03/2025	1,903,065 VND	1,203,727 VND	1,826,147 VND	1,228,408 VND	4,034,521 VND	491,283 VND	893,102 VND	1,042,167 VND	1,138,022 VND	3,698,328 VND	1,717,165 VND	3,501,411 VND	1,688,247 VND	1,553,101 VND	1,625,760 VND	1,833,730 VND	2,871,712 VND	1,189,563 VND	1,488,380 VND	2,445,814 VND	1,189,563 VND	1,137,432 VND	1,247,005 VND	1,079,577 VND	844,486 VND	16,386,415 VND	1,084,053 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TiCN 4 Flutes S (Short)				TiCN 4 Flutes L (Long)			TiCN 4 Flutes R (Regular)	TiCN 3 Flutes S (Short)
Blade diameter (D)(φ)	6 ～ 32	6 ～ 50	5 ～ 40	10 ～ 50	10 ～ 30	14 ～ 50	6 ～ 26	6 ～ 30	6 ～ 30	3 ～ 50	16 ～ 50	3 ～ 50	16 ～ 50	6 ～ 50	6 ～ 50	5 ～ 50	6 ～ 50	16 ～ 50	5 ～ 50	5 ～ 50	10 ～ 50	5 ～ 50	5 ～ 50	6 ～ 50	3 ～ 30	6 ～ 50	24 ～ 50	12 ～ 29
Blade length (ℓ)(mm)	13 ～ 53	26 ～ 150	10 ～ 65	35 ～ 120	45 ～ 90	65 ～ 200	-	19 ～ 68	11 ～ 45	9 ～ 70	32 ～ 75	15 ～ 145	32 ～ 75	16 ～ 122	15 ～ 70	15 ～ 120	30 ～ 150	40 ～ 75	10 ～ 80	15 ～ 120	45 ～ 150	10 ～ 80	8 ～ 75	15 ～ 110	5 ～ 55	16 ～ 112	150 ～ 300	26 ～ 45
Shank diameter (d)(mm)	6 ～ 32	6 ～ 42	6 ～ 32	10 ～ 42	10 ～ 25	16 ～ 42	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	16 ～ 42	6 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 42	25 ～ 42	12 ～ 25
Number of flutes(sheet)	3 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 5	4 ～ 6	4 ～ 5	3 ～ 5	3 ～ 4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 4	4 ～ 6	4 ～ 6	6
Overall Length (L)(mm)	57 ～ 133	80 ～ 250	70 ～ 185	100 ～ 240	95 ～ 166	145 ～ 320	68 ～ 166	63 ～ 144	80 ～ 160	50 ～ 160	200 ～ 350	60 ～ 230	170 ～ 280	80 ～ 220	60 ～ 160	80 ～ 220	80 ～ 250	180 ～ 320	70 ～ 200	80 ～ 240	100 ～ 270	70 ～ 200	55 ～ 165	60 ～ 200	55 ～ 165	60 ～ 214	220 ～ 390	83 ～ 121
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Side / Groove	Side	Plane / Side / Groove
Coating	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN
Blade shape type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	-	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available / None	Available / None	Available
Tool Material Type	Powder high-speed steel	Alloy HSS	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	72 ～ 113	-	64 ～ 100	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	-	Straight

Loading...Tải…