Roughing End Mills (HSS)（Tool Material Type：Cobalt HSS）

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Roughing End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	24 ～ 150	6 ～ 42	3 ～ 6	68 ～ 252	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiAlN / Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 946,992 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Regular Length Short AGRERS

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  7 ～ 50	20 ～ 70	10 ～ 42	4 ～ 6	65 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,460,885 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill Long LRE

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 50	55 ～ 140	12 ～ 42	4 ～ 6	105 ～ 250	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 2,095,091 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF

  OSG

  Next-generation HSS roughing end mill that can cut in a wide range - dry and wet.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 40	13 ～ 63	6 ～ 32	4 ～ 6	80 ～ 185	general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,760,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Short AGRES

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	11 ～ 75	6 ～ 42	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	45 ～ 95	-

  From: 1,346,830 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αM S-Coated Alpha Nick Regular Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	35 ～ 120	10 ～ 42	4 ～ 6	100 ～ 240	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,826,147 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]·High-speed steel roughing short flute length type with standard TiAlN coating·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	13 ～ 45	6 ～ 25	3 ～ 6	57 ～ 121	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiAlN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 649,146 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-αL S-Coated Alpha Nick Long Blade

  SANKO MFG

  Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 50	65 ～ 200	16 ～ 42	4 ～ 6	145 ～ 320	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 4,034,521 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αH, α Nick Hard Type

  SANKO MFG

  A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	8 ～ 75	6 ～ 42	4 ～ 6	55 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 760,406 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

  MISUMI

  [Features]·High-speed steel roughing uncoated regular flute length type with optimum pitch width for coarse finishing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	19 ～ 112	6 ～ 42	3 ～ 6	63 ～ 214	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 714,399 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Heavy, Long AGLHV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 145	6 ～ 42	4 ～ 6	60 ～ 230	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,004,450 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy HV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 776,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill Short SRE

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 70	6 ～ 42	4 ～ 6	60 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,036,910 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing Extra Long Type EX-REXL

  OSG

  General-purpose heavy-cutting roughing end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	50 ～ 212	10 ～ 42	4 ～ 6	120 ～ 315	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 3,151,231 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short fine pitch type EX-TIN-RESF

  OSG

  Roughing end mill short blade series with TiN coating for heavy cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	13 ～ 75	6 ～ 42	4 ～ 6	57 ～ 177	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,760,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing, Short Type EX-REES

  OSG

  General-purpose heavy-cutting roughing end mill short type using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	13 ～ 75	6 ～ 42	4 ～ 6	57 ～ 177	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,173,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Rough and Finish End Mill (Long Type) RFEL

  OSG

  The rough and finish end mill adopts a unique trapezoidal flute shape that takes into consideration both heavy cutting and finish cutting, and has offset notches along the cutting edge as well as edge strength that can withstand heavy cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	106 ～ 212	20 ～ 42	4 ～ 6	180 ～ 315	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: 8,358,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαM P Coating Xα Nick Regular Flute

  SANKO MFG

  [Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 40	15 ～ 100	6 ～ 32	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,336,512 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-FPαL S-Coating Fine Pitch Long Flute

  SANKO MFG

  [Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	100 ～ 270	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	Plane / Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,445,814 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αS α Nick Short Flute

  SANKO MFG

  Normal pitch type roughing end mill.Blade typeMaterials: Hs-Co (cobalt high-speed steel)Helix angle: 30°nick shape: standard pitch nick

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 60	10 ～ 95	6 ～ 42	4 ～ 6	70 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 793,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αM α Nick Regular Flute

  SANKO MFG

  A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	35 ～ 120	10 ～ 42	4 ～ 6	100 ～ 240	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,169,062 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αLα Nick Long Flute

  SANKO MFG

  A standard pitch type roughing end mill. Enables a wide range of machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 60	65 ～ 300	16 ～ 42	4 ～ 6	145 ～ 420	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 2,697,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αHM, α Nick Hard Type Regular Blade

  SANKO MFG

  A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 110	6 ～ 42	4 ～ 6	60 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 785,624 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  αFS α Flat Nick Roughing Short Blade

  SANKO MFG

  A flat nick type roughing end mill. Semi-finishing is possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	25 ～ 80	10 ～ 42	4 ～ 6	90 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,160,448 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-4-Flute Extra Long End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	-	-	2 ～ 4	-	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 795,792 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Extra Long Roughing End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  20 ～ 50	-	-	4 ～ 6	-	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 2,922,735 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	20 ～ 75	10 ～ 42	4 ～ 6	130 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	-	Square	Standard torsion (30-40°)	Available / None	Cobalt HSS	64 ～ 144	-

  From: 2,713,228 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Roughing End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 32	-	6 ～ 32	4 ～ 6	68 ～ 186	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiCN / Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 491,283 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	13 ～ 75	6 ～ 42	3 ～ 6	57 ～ 177	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 707,101 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	19 ～ 112	6 ～ 42	3 ～ 6	63 ～ 214	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 883,928 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	95 ～ 252	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,059,504 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·High-speed steel roughing end mill that achieves both machining performance and price·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 1,058,879 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

  MISUMI

  [Features]·High-speed steel roughing uncoated short flute length type with optimum pitch width for coarse finishing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	13 ～ 75	6 ～ 42	3 ～ 6	57 ～ 177	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 530,481 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

  MISUMI

  [Features]·High-speed steel roughing uncoated long flute length type with optimum pitch width for coarse finishing·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	95 ～ 252	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 867,663 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

  MISUMI

  [Features]·High-speed steel roughing uncoated long shank type with pitch width ideal for coarse finishing·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 886,429 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Heavy AGHV

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 815,796 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Medium AGREM

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	80 ～ 220	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	53 ～ 112	-

  From: 1,538,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Long AGREL

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	26 ～ 150	6 ～ 42	4 ～ 6	80 ～ 250	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,509,232 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL Coated End Mill (Roughing Short Type) WH-REES

  OSG

  Next-generation HSS roughing end mill that can cut in a wide range - dry and wet.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 40	13 ～ 63	6 ～ 32	4 ～ 6	80 ～ 185	general steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,760,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tuf-Nick Gold End Mill (Short Type) TFGS

  OSG

  Short type Tuf-Nick gold end mill capable of roughing and semi-finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	13 ～ 75	6 ～ 42	4 ～ 6	57 ～ 177	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiN	Roughing	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: 1,440,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tuf-Nick Gold End Mill (Medium Type) TFGN

  OSG

  Medium type Tuf-Nick gold end mill capable of roughing and semi-finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	60 ～ 214	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiN	Roughing	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: 1,578,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, End Mill (roughing medium, fine-pitch type) EX-TIN-RENF

  OSG

  Roughing end mill medium blade series with TiN coating for heavy cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	60 ～ 214	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	TiN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 2,066,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL Coated End Mill (Roughing Medium Fine Pitch Type) WH-RENF

  OSG

  It is a next-generation high-speed steel roughing end mill that can cut a wide range of dry and wet.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 40	16 ～ 95	6 ～ 32	4 ～ 6	80 ～ 200	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 2,066,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (Roughing Medium Type) EX-REEN

  OSG

  Medium flute series of heavy-duty roughing end millsTool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	60 ～ 214	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove	Non-Coated	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,368,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL Coated End Mill (Roughing Medium Type) WH-REEN

  OSG

  It is a next-generation high-speed steel roughing end mill that can cut a wide range of dry and wet.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 40	16 ～ 95	6 ～ 32	4 ～ 6	80 ～ 200	general steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove	-	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 2,066,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YG 1	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	SANKO MFG	MISUMI	SANKO MFG	SANKO MFG	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	YG 1	YG 1	NACHI(FUJIKOSHI)	OSG KOREA CORP	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	Long Roughing End Mill (M42 HSS)	AG Mill, Roughing, Regular Length Short AGRERS	Roughing End Mill Long LRE	WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF	AG Mill, Roughing, Short AGRES	S-αM S-Coated Alpha Nick Regular Blade	TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut	S-αL S-Coated Alpha Nick Long Blade	αH, α Nick Hard Type	High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model	AG Mill, Heavy, Long AGLHV	Heavy HV	Roughing End Mill Short SRE	Roughing Extra Long Type EX-REXL	Short fine pitch type EX-TIN-RESF	Roughing, Short Type EX-REES	Rough and Finish End Mill (Long Type) RFEL	P-XαM P Coating Xα Nick Regular Flute	S-FPαL S-Coating Fine Pitch Long Flute	αS α Nick Short Flute	αM α Nick Regular Flute	αLα Nick Long Flute	αHM, α Nick Hard Type Regular Blade	αFS α Flat Nick Roughing Short Blade	2-4-Flute Extra Long End Mill	Extra Long Roughing End Mill	AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU	Long Roughing End Mill	AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model	High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model	High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model	AG Mill, Heavy AGHV	AG Mill, Roughing, Medium AGREM	AG Mill, Roughing, Long AGREL	WXL Coated End Mill (Roughing Short Type) WH-REES	Tuf-Nick Gold End Mill (Short Type) TFGS	Tuf-Nick Gold End Mill (Medium Type) TFGN	TiN Coating, End Mill (roughing medium, fine-pitch type) EX-TIN-RENF	WXL Coated End Mill (Roughing Medium Fine Pitch Type) WH-RENF	End Mill (Roughing Medium Type) EX-REEN	WXL Coated End Mill (Roughing Medium Type) WH-REEN
From	946,992 VND	1,460,885 VND	2,095,091 VND	1,760,000 VND	1,346,830 VND	1,826,147 VND	649,146 VND	4,034,521 VND	760,406 VND	714,399 VND	1,004,450 VND	776,873 VND	1,036,910 VND	3,151,231 VND	1,760,000 VND	1,173,333 VND	8,358,333 VND	1,336,512 VND	2,445,814 VND	793,873 VND	1,169,062 VND	2,697,418 VND	785,624 VND	1,160,448 VND	795,792 VND	2,922,735 VND	2,713,228 VND	491,283 VND	707,101 VND	883,928 VND	1,059,504 VND	1,058,879 VND	530,481 VND	867,663 VND	886,429 VND	815,796 VND	1,538,466 VND	1,509,232 VND	1,760,000 VND	1,440,000 VND	1,578,333 VND	2,066,667 VND	2,066,667 VND	1,368,333 VND	2,066,667 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s)	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	8 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	17 Day(s)	17 Day(s)	17 Day(s)	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s)	7 Day(s)	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)	6 ～ 50	7 ～ 50	12 ～ 50	6 ～ 40	6 ～ 50	10 ～ 50	5 ～ 30	14 ～ 50	5 ～ 50	6 ～ 50	3 ～ 50	3 ～ 50	6 ～ 50	10 ～ 50	6 ～ 50	6 ～ 50	20 ～ 50	5 ～ 40	10 ～ 50	5 ～ 60	10 ～ 50	14 ～ 60	6 ～ 50	10 ～ 50	6 ～ 50	20 ～ 50	10 ～ 50	6 ～ 32	5 ～ 50	6 ～ 50	10 ～ 50	6 ～ 30	5 ～ 50	10 ～ 50	6 ～ 30	3 ～ 50	6 ～ 50	6 ～ 50	6 ～ 40	6 ～ 50	6 ～ 50	6 ～ 50	6 ～ 40	6 ～ 50	6 ～ 40
Blade length (ℓ)(mm)	24 ～ 150	20 ～ 70	55 ～ 140	13 ～ 63	11 ～ 75	35 ～ 120	13 ～ 45	65 ～ 200	8 ～ 75	19 ～ 112	15 ～ 145	9 ～ 70	15 ～ 70	50 ～ 212	13 ～ 75	13 ～ 75	106 ～ 212	15 ～ 100	45 ～ 150	10 ～ 95	35 ～ 120	65 ～ 300	15 ～ 110	25 ～ 80	-	-	20 ～ 75	-	13 ～ 75	19 ～ 112	45 ～ 150	11 ～ 45	13 ～ 75	45 ～ 150	11 ～ 45	9 ～ 70	16 ～ 112	26 ～ 150	13 ～ 63	13 ～ 75	16 ～ 112	16 ～ 112	16 ～ 95	16 ～ 112	16 ～ 95
Shank diameter (d)(mm)	6 ～ 42	10 ～ 42	12 ～ 42	6 ～ 32	6 ～ 42	10 ～ 42	6 ～ 25	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	6 ～ 42	20 ～ 42	6 ～ 32	10 ～ 42	6 ～ 42	10 ～ 42	16 ～ 42	6 ～ 42	10 ～ 42	-	-	10 ～ 42	6 ～ 32	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 25	6 ～ 42	10 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 32
Number of flutes(sheet)	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	2 ～ 4	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	3 ～ 6	4 ～ 6	3 ～ 4	3 ～ 6	4 ～ 6	3 ～ 4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6
Overall Length (L)(mm)	68 ～ 252	65 ～ 160	105 ～ 250	80 ～ 185	80 ～ 220	100 ～ 240	57 ～ 121	145 ～ 320	55 ～ 165	63 ～ 214	60 ～ 230	50 ～ 160	60 ～ 160	120 ～ 315	57 ～ 177	57 ～ 177	180 ～ 315	80 ～ 220	100 ～ 270	70 ～ 210	100 ～ 240	145 ～ 420	60 ～ 200	90 ～ 200	-	-	130 ～ 350	68 ～ 186	57 ～ 177	63 ～ 214	95 ～ 252	80 ～ 160	57 ～ 177	95 ～ 252	80 ～ 160	50 ～ 160	80 ～ 220	80 ～ 250	80 ～ 185	57 ～ 177	60 ～ 214	60 ～ 214	80 ～ 200	60 ～ 214	80 ～ 200
work material	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]
Machining Application	Plane / Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	Side	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove
Coating	TiAlN / Non-Coated	TiAlN	Non-Coated	-	AG	TiCN	TiAlN	TiCN	Non-Coated	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiCN / Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	AG	AG	TiAlN	-	TiN	TiN	TiN	-	Non-Coated	-
Blade shape type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	-	-	-	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	-	-	Available / None	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	45 ～ 95	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	64 ～ 144	-	-	-	-	-	-	-	-	-	53 ～ 112	-	-	-	-	-	-	-	-
shank	-	-	-	Straight	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	Straight	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight

Loading...Tải…