(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Square End Mills (HSS)（work material：Aluminum）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
178 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GHKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 648,073 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 4 55 ～ 165 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 216,421 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 60 2 ～ 85 6 ～ 42 2 50 ～ 185 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 376,717 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GLKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 599,994 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,833 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 55 ～ 165 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 163,955 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 258,103 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 641,699 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill (3-Flute General Purpose Short Type) ETS
OSG
General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 30 2.5 ～ 55 6 ～ 25 3 45 ～ 125 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 675,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute Extra Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 60 2.5 ～ 300 6 ～ 42 2 42 ～ 400 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 598,814 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Short Type EDS
OSG
High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.45 ～ 60 1.1 ～ 80 6 ～ 42 2 45 ～ 170 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 543,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
End Mill (2-Flute Short Type for Aluminum) AL-EDS
OSG
2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 30 4 ～ 55 6 ～ 25 2 45 ～ 125 Aluminum[◎] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 603,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
MISUMI
[Features]·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 15 ～ 90 6 ～ 25 2 60 ～ 160 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 553,002 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
[Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 585,240 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS
OSG
V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 8 ～ 38 6 ～ 20 2 50 ～ 125 Aluminum[○] Plane / Side / Groove / Inclined Cuts - Square Weak torsion (15 to 25˚) - Powder high-speed steel - Straight From: 1,441,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS
OSG
[Features]· Adopts TiN coating with excellent weld resistance and abrasion resistance.· Those with outer diameter of 41 mm or more have center holes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 75 6 ～ 42 4 ～ 6 50 ～ 165 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 865,000 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill For Keyway (Positive Tolerance)
FUKUDA
Endmill dedicated for key groove machining. Positive blade diameter tolerance. A straight shank.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 5 ～ 30 6 ～ 25 2 50 ～ 100 Aluminum[○] Other Non-Coated For Keyway Other Available Alloy HSS - - From: 655,272 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square regular blade length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 25 3.5 ～ 60 6 ～ 25 2 45 ～ 130 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 307,571 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square long flute length 2-flute type with up to ø50·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 2 60 ～ 195 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 350,110 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
TIN coating, 30° helix angle, cobalt high-speed steel square end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,140,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN
OSG
2-flute straight flute end mill medium type for molding using powder metal high-speed steel CPM as the base material. It can be molded into the required shape for use.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 20 5 ～ 45 6 ～ 20 2 45 ～ 110 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square No torsion - Powder high-speed steel - Straight From: 925,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 30 ～ 300 6 ～ 42 4 70 ～ 400 Aluminum[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 72,392 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 2 60 ～ 215 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 324,171 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
[Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 12 ～ 68 6 ～ 25 4 55 ～ 144 Aluminum[○] Plane / Side / Groove / Countersinking For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 708,977 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model
MISUMI
[Features]·Uncoated 4-flute short blade length type·Effective for side milling with 40° helix angle, which is stronger than standard helix angle·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 8 ～ 65 6 ～ 32 4 52 ～ 150 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 324,252 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square short flute length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 45 ～ 165 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 290,681 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 659,797 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
General-purpose 2-flute end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 30 ～ 150 6 ～ 32 2 70 ～ 235 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 986,667 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute short type end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 50 1.6 ～ 75 6 ～ 42 2 45 ～ 165 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 776,667 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Long Type EDL
OSG
General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 653,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,043,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)
OSG
V coated powder metal high-speed steel XPM keyway end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 12 5 ～ 15 6 ～ 12 2 50 ～ 70 Aluminum[○] Plane / Side / Groove / Inclined Cuts - Square Weak torsion (15 to 25˚) - Powder high-speed steel - Straight From: 1,456,667 VND Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
XPM End Mill (2-Flute Short Type) XPM-EDS
OSG
2-flute end mill short type using powder metal high-speed steel XPM as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 165 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Powder high-speed steel - Straight From: 848,333 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
XPM End Mill (High Helix Short Type) XPM-EHS
OSG
Sharp, high helix type end mill using powder metal high-speed steel XPM as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 15 ～ 55 8 ～ 32 3 ～ 4 65 ～ 150 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Powerful Torsion (45°-60°) - Powder high-speed steel - Straight From: 1,000,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 15 ～ 120 6 ～ 42 2 53 ～ 215 Aluminum[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 598,814 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 6-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 50 ～ 60 150 ～ 300 42 6 245 ～ 400 Aluminum[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 22,038,100 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2T S Coating S-TEC 2-Flute Short Flute
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 10 ～ 85 6 ～ 42 4 50 ～ 185 Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute H.S.S End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 40 8 ～ 65 6 ～ 32 4 50 ～ 150 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 220,258 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]·High speed steel powder square short blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- AS
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2.5 ～ 65 6 ～ 32 2 45 ～ 150 Aluminum[○] Plane / Side / Groove / Countersinking For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 635,898 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
MISUMI
[Features]·Suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 2 60 ～ 195 Aluminum[○] Plane / Side / Groove / Countersinking For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 546,746 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type
MISUMI
[Features]·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 12 ～ 68 6 ～ 25 4 55 ～ 144 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 529,230 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]·Uncoated 4-flute long flute length type·Effective for side milling with 40° helix angle, which is stronger than standard helix angle·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 Aluminum[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 424,343 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) - Alloy HSS - - From: 838,812 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | YG 1 | SANKO MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | FUKUDA | OSG | OSG | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | FUKUDA | MISUMI | MISUMI | OSG | OSG | FUKUDA | YG 1 | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUKUDA | FUKUDA | SANKO MFG | SANKO MFG | OSG KOREA CORP | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) |
| Product SeriesDòng sản phẩm | Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model | CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1) | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | ||||||||||||||||||||||||||||||||||
| From | 648,073 VND | 216,421 VND | 376,717 VND | 599,994 VND | 576,388 VND | 344,833 VND | 163,955 VND | 258,103 VND | 641,699 VND | 675,000 VND | 598,814 VND | 543,333 VND Special Price On Sale Till 31/03/2025 | 603,333 VND | 553,002 VND | 585,240 VND | 1,441,667 VND | 865,000 VND | 655,272 VND | 307,571 VND | 350,110 VND | 1,140,000 VND | 925,000 VND | 72,392 VND | 324,171 VND | 708,977 VND | 324,252 VND | 290,681 VND | 659,797 VND | 986,667 VND | 776,667 VND | 653,333 VND | 1,043,333 VND | 1,456,667 VND | 848,333 VND | 1,000,000 VND | 598,814 VND | 22,038,100 VND | 697,174 VND | 412,127 VND | 220,258 VND | 635,898 VND | 546,746 VND | 529,230 VND | 424,343 VND | 838,812 VND |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 17 Day(s) | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 17 Day(s) | 8 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | 7 Day(s) or more | Same day or more | Same day or more | 15 Day(s) | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 20 | 1 ～ 50 | 1 ～ 60 | 3 ～ 20 | 1 ～ 50 | 1 ～ 50 | 1 ～ 50 | 2.5 ～ 50 | 2.5 ～ 50 | 1 ～ 30 | 0.8 ～ 60 | 0.45 ～ 60 | 1.5 ～ 30 | 3 ～ 25 | 1 ～ 50 | 3 ～ 20 | 2.5 ～ 50 | 3 ～ 30 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 1.5 ～ 20 | 3 ～ 60 | 2 ～ 50 | 3 ～ 25 | 3 ～ 40 | 1 ～ 50 | 2.5 ～ 50 | 3 ～ 40 | 0.8 ～ 50 | 0.8 ～ 40 | 1 ～ 40 | 3 ～ 12 | 0.8 ～ 40 | 6 ～ 30 | 3 ～ 50 | 50 ～ 60 | 1 ～ 40 | 3 ～ 60 | 2 ～ 40 | 1 ～ 40 | 3 ～ 40 | 3 ～ 25 | 3 ～ 40 | 1 ～ 50 |
| Blade length (ℓ)(mm) | 6 ～ 20 | 2.5 ～ 75 | 2 ～ 85 | 6 ～ 20 | 2 ～ 70 | 2 ～ 70 | 2.5 ～ 75 | 7 ～ 70 | 7 ～ 70 | 2.5 ～ 55 | 2.5 ～ 300 | 1.1 ～ 80 | 4 ～ 55 | 15 ～ 90 | 2 ～ 70 | 8 ～ 38 | 7 ～ 75 | 5 ～ 30 | 3.5 ～ 60 | 15 ～ 110 | 15 ～ 110 | 5 ～ 45 | 30 ～ 300 | 10 ～ 125 | 12 ～ 68 | 8 ～ 65 | 2.5 ～ 75 | 7 ～ 70 | 30 ～ 150 | 1.6 ～ 75 | 6 ～ 110 | 6 ～ 110 | 5 ～ 15 | 2 ～ 65 | 15 ～ 55 | 15 ～ 120 | 150 ～ 300 | 2 ～ 65 | 10 ～ 85 | 8 ～ 65 | 2.5 ～ 65 | 15 ～ 110 | 12 ～ 68 | 15 ～ 110 | 2 ～ 70 |
| Shank diameter (d)(mm) | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 20 | 6 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 12 | 6 ～ 32 | 8 ～ 32 | 6 ～ 42 | 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 |
| Number of flutes(sheet) | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 4 ～ 6 | 2 | 2 | 2 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 3 ～ 4 | 2 | 6 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 |
| Overall Length (L)(mm) | 50 ～ 85 | 55 ～ 165 | 50 ～ 185 | 50 ～ 85 | 50 ～ 160 | 50 ～ 160 | 55 ～ 165 | 50 ～ 160 | 50 ～ 160 | 45 ～ 125 | 42 ～ 400 | 45 ～ 170 | 45 ～ 125 | 60 ～ 160 | 50 ～ 160 | 50 ～ 125 | 50 ～ 165 | 50 ～ 100 | 45 ～ 130 | 60 ～ 195 | 60 ～ 195 | 45 ～ 110 | 70 ～ 400 | 60 ～ 215 | 55 ～ 144 | 52 ～ 150 | 45 ～ 165 | 50 ～ 160 | 70 ～ 235 | 45 ～ 165 | 50 ～ 195 | 50 ～ 195 | 50 ～ 70 | 50 ～ 165 | 65 ～ 150 | 53 ～ 215 | 245 ～ 400 | 50 ～ 150 | 50 ～ 185 | 50 ～ 150 | 45 ～ 150 | 60 ～ 195 | 55 ～ 144 | 60 ～ 195 | 50 ～ 160 |
| work material | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Other | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts |
| Coating | TiN | TiAlN / Non-Coated | Non-Coated | TiN | AG | Non-Coated | TiAlN | Non-Coated | AG | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | - | TiN | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | TiAlN / Non-Coated | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiN | Non-Coated | TiN | Non-Coated | TiN | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | TiCN / Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiCN |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | For Keyway | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Torsion Angle (θ) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Other | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | - | - | Available | - | - | - | - | - | - | - | Available | - | - | Available | - | - | - | Available | Available | Available | - | - | Available | - | Available | Available | Available | - | - | - | - | - | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Alloy HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Alloy HSS | Alloy HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Alloy HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | Straight | - | Straight | Straight | - | - | Straight | Straight | - | - | - | Straight | Straight | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | Straight | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy