Square End Mills (HSS)（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GHKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	6 ～ 20	6 ～ 20	2	50 ～ 85	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 648,073 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	4	55 ～ 165	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 216,421 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS2T, 2-Flute Short Blade

  SANKO MFG

  A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 60	2 ～ 85	6 ～ 42	2	50 ～ 185	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 376,717 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GLKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	6 ～ 20	6 ～ 20	2	50 ～ 85	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 599,994 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 2-Flute 2AGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 576,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	2	55 ～ 165	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 163,955 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 4-Flute 4AGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 641,699 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

  MISUMI

  [Features]·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 553,002 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 2-Flute 2GE

  NACHI(FUJIKOSHI)

  [Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 585,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS

  OSG

  [Features]· Adopts TiN coating with excellent weld resistance and abrasion resistance.· Those with outer diameter of 41 mm or more have center holes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 75	6 ～ 42	4 ～ 6	50 ～ 165	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 865,000 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute Long Type EX-TIN-EML

  OSG

  TIN coating, 30° helix angle, cobalt high-speed steel square end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,140,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	2	60 ～ 215	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 324,171 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

  MISUMI

  [Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 708,977 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 4-Flute 4GE

  NACHI(FUJIKOSHI)

  It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 659,797 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Short Type EX-TIN-EDS

  OSG

  TiN coated general-purpose 2-flute short type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 50	1.6 ～ 75	6 ～ 42	2	45 ～ 165	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 776,667 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Long Type EX-TIN-EDL

  OSG

  TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 1,043,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)

  OSG

  V coated powder metal high-speed steel XPM keyway end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 12	5 ～ 15	6 ～ 12	2	50 ～ 70	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: 1,456,667 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s)

  15 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Short Type) XPM-EDS

  OSG

  2-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 165	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 848,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (High Helix Short Type) XPM-EHS

  OSG

  Sharp, high helix type end mill using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	15 ～ 55	8 ～ 32	3 ～ 4	65 ～ 150	Quenched and tempered steel[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: 1,000,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2T S Coating S-TEC 2-Flute Short Flute

  SANKO MFG

  2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 697,174 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS4T, 4-Flute Short Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	10 ～ 85	6 ～ 42	4	50 ～ 185	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 412,127 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute H.S.S End Mill (Uncoated/TIN/TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	50 ～ 150	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN / Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 220,258 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Long End Mill (TANK-POWER)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 26	55 ～ 90	12 ～ 25	4	115 ～ 165	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	AG	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	-

  From: 1,061,540 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

  MISUMI

  [Features]·High speed steel powder square short blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	45 ～ 150	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 635,898 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

  MISUMI

  [Features]·Suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	2	60 ～ 195	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 546,746 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type

  MISUMI

  [Features]·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 529,230 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX End Mill, 2-Flute 2SGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 838,812 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Medium End Mill, 2-Flute 2MGE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 8	15 ～ 20	8 ～ 10	2	60 ～ 65	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 454,500 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 2-Flute Mill, Medium 2AGEM

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 20	3 ～ 45	6 ～ 20	2	50 ～ 110	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 576,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Long End Mill, 4-Flute SL4GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	4	60 ～ 210	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 744,190 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute long type) V-XPM-EDL

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 90	6 ～ 25	2	65 ～ 180	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,416,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN

  OSG

  Long shank type 2-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	2	80 ～ 350	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,195,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

  OSG

  Long shank type 4-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	80 ～ 350	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,266,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (high-helix short type) V-XPM-EHS

  OSG

  High torsion type with great sharpness. Can be used for a wide range of applications from heavy cutting to finishing cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	6 ～ 55	6 ～ 32	3 ～ 4	55 ～ 150	Quenched and tempered steel[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: 1,326,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 2-Flute Long Flute

  SANKO MFG

  A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 250	6 ～ 42	2	60 ～ 345	Quenched and tempered steel[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 493,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 838,222 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4T S Coating STEC 4-Flute Short

  SANKO MFG

  [Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 911,006 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 4-Flute Long Flute

  SANKO MFG

  A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	20 ～ 300	6 ～ 42	4	60 ～ 395	Quenched and tempered steel[○]	Plane / Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 526,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SL Slotting Regular Flute

  SANKO MFG

  A straight blade type 2-flutes end mill.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Straight Blade

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 49	10 ～ 60	6 ～ 32	2	60 ～ 170	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	No torsion	Available	Cobalt HSS	-	-

  From: 414,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	4	60 ～ 215	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 344,432 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Inch End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 3/16	-	-	2	-	Quenched and tempered steel[◎]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 670,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

  MISUMI

  [Features]·High speed steel powder square regular blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 635,898 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

  MISUMI

  [Features]·High speed steel powder square long blade length type that can expect for durability·Suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	15 ～ 75	6 ～ 20	2	60 ～ 140	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 731,080 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

  MISUMI

  AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	8 ～ 45	6 ～ 25	4	52 ～ 121	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 692,921 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

  MISUMI

  [Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 773,828 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NACHI(FUJIKOSHI)	YG 1	SANKO MFG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	YG 1	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	YG 1	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	OSG KOREA CORP	YG 1	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	YG 1	YG 1	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	G 2-Flute End Mill for Key Groove GHKEY	4-Flute End Mill (M42 HSS)	VS2T, 2-Flute Short Blade	G 2-Flute End Mill for Key Groove GLKEY	AG Mill, 2-Flute 2AGE	2-Flute End Mill (M42 HSS)	AG Mill, 4-Flute 4AGE	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	G Standard End Mill, 2-Flute 2GE	TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS	4-flute Long Type EX-TIN-EML	2-Flute Long End Mill (M42 HSS)	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	G Standard End Mill, 4-Flute 4GE	2-flute Short Type EX-TIN-EDS	2-flute Long Type EX-TIN-EDL	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)	XPM End Mill (2-Flute Short Type) XPM-EDS	XPM End Mill (High Helix Short Type) XPM-EHS	SS2T S Coating S-TEC 2-Flute Short Flute	VS4T, 4-Flute Short Blade	4-Flute H.S.S End Mill (Uncoated/TIN/TICN)	4-Flute Long End Mill (TANK-POWER)	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated High-Speed Steel Square End Mill, 2-Flute / Long	Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type	SG-FAX End Mill, 2-Flute 2SGE	G Medium End Mill, 2-Flute 2MGE	AG Mill, 2-Flute Mill, Medium 2AGEM	G Long End Mill, 4-Flute SL4GE	V Coating XPM End Mill (2-flute long type) V-XPM-EDL	XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	V Coating XPM End Mill (high-helix short type) V-XPM-EHS	LVS2T, 2-Flute Long Flute	KHB4TS Hybrid Short 4-Flute Blade	SS4T S Coating STEC 4-Flute Short	LVS2T, 4-Flute Long Flute	SL Slotting Regular Flute	4-Flute Long End Mill (M42 HSS)	2-Flute Inch End Mill	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
From	648,073 VND	216,421 VND	376,717 VND	599,994 VND	576,388 VND	163,955 VND	641,699 VND	553,002 VND	585,240 VND	865,000 VND	1,140,000 VND	324,171 VND	708,977 VND	659,797 VND	776,667 VND	1,043,333 VND	1,456,667 VND	848,333 VND	1,000,000 VND	697,174 VND	412,127 VND	220,258 VND	1,061,540 VND	635,898 VND	546,746 VND	529,230 VND	838,812 VND	454,500 VND	576,388 VND	744,190 VND	1,416,667 VND	1,195,000 VND	1,266,667 VND	1,326,667 VND	493,471 VND	838,222 VND	911,006 VND	526,028 VND	414,488 VND	344,432 VND	670,366 VND	635,898 VND	731,080 VND	692,921 VND	773,828 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	Same day or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	17 Day(s)	4 Day(s) or more	4 Day(s) or more	Same day or more	7 Day(s) or more	Same day or more	15 Day(s)	17 Day(s)	17 Day(s)	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	10 Day(s)	6 Day(s) or more	6 Day(s) or more	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	7 Day(s)	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật								Non-Coated 2 Flutes L (Long)					AS 4 Flutes R (Regular)											AS 2 Flutes S (Short)	AS 2 Flutes L (Long)	Non-Coated 4 Flutes R (Regular)																AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes L (Long)
Blade diameter (D)(φ)	3 ～ 20	1 ～ 50	1 ～ 60	3 ～ 20	1 ～ 50	1 ～ 50	2.5 ～ 50	3 ～ 25	1 ～ 50	2.5 ～ 50	3 ～ 40	2 ～ 50	3 ～ 25	2.5 ～ 50	0.8 ～ 50	1 ～ 40	3 ～ 12	0.8 ～ 40	6 ～ 30	1 ～ 40	3 ～ 60	2 ～ 40	12 ～ 26	1 ～ 40	3 ～ 40	3 ～ 25	1 ～ 50	6 ～ 8	1.5 ～ 20	3 ～ 40	3 ～ 30	8 ～ 50	8 ～ 50	3 ～ 30	3 ～ 50	5 ～ 30	3 ～ 40	3 ～ 60	2 ～ 49	2 ～ 50	1 ～ 3/16	1 ～ 25	3 ～ 20	3 ～ 25	3 ～ 25
Blade length (ℓ)(mm)	6 ～ 20	2.5 ～ 75	2 ～ 85	6 ～ 20	2 ～ 70	2.5 ～ 75	7 ～ 70	15 ～ 90	2 ～ 70	7 ～ 75	15 ～ 110	10 ～ 125	12 ～ 68	7 ～ 70	1.6 ～ 75	6 ～ 110	5 ～ 15	2 ～ 65	15 ～ 55	2 ～ 65	10 ～ 85	8 ～ 65	55 ～ 90	2.5 ～ 65	15 ～ 110	12 ～ 68	2 ～ 70	15 ～ 20	3 ～ 45	15 ～ 125	15 ～ 90	20 ～ 75	20 ～ 75	6 ～ 55	20 ～ 250	15 ～ 55	10 ～ 65	20 ～ 300	10 ～ 60	10 ～ 125	-	3.5 ～ 60	15 ～ 75	8 ～ 45	15 ～ 90
Shank diameter (d)(mm)	6 ～ 20	6 ～ 42	6 ～ 42	6 ～ 20	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 12	6 ～ 32	8 ～ 32	6 ～ 32	6 ～ 42	6 ～ 32	12 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 42	8 ～ 10	6 ～ 20	6 ～ 32	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	8 ～ 25	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 42	-	6 ～ 25	6 ～ 20	6 ～ 25	6 ～ 25
Number of flutes(sheet)	2	4	2	2	2	2	4	2	2	4 ～ 6	4	2	4	4	2	2	2	2	3 ～ 4	2	4	4	4	2	2	4	2	2	2	4	2	2	4	3 ～ 4	2	4	4	4	2	4	2	2	2	4	4
Overall Length (L)(mm)	50 ～ 85	55 ～ 165	50 ～ 185	50 ～ 85	50 ～ 160	55 ～ 165	50 ～ 160	60 ～ 160	50 ～ 160	50 ～ 165	60 ～ 195	60 ～ 215	55 ～ 144	50 ～ 160	45 ～ 165	50 ～ 195	50 ～ 70	50 ～ 165	65 ～ 150	50 ～ 150	50 ～ 185	50 ～ 150	115 ～ 165	45 ～ 150	60 ～ 195	55 ～ 144	50 ～ 160	60 ～ 65	50 ～ 110	60 ～ 210	65 ～ 180	80 ～ 350	80 ～ 350	55 ～ 150	60 ～ 345	60 ～ 135	50 ～ 150	60 ～ 395	60 ～ 170	60 ～ 215	-	45 ～ 130	60 ～ 140	52 ～ 121	60 ～ 160
work material	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking
Coating	TiN	TiAlN / Non-Coated	Non-Coated	TiN	AG	TiAlN	AG	Non-Coated	TiN	TiN	TiN	TiAlN / Non-Coated	For High Hardness (Silicon Group)	TiN	TiN	TiN	-	Non-Coated	Non-Coated	TiCN	Non-Coated	TiCN / Non-Coated	AG	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiCN	TiN	TiAlN	TiN	-	Non-Coated	Non-Coated	-	Non-Coated	For High Hardness (Silicon Group)	TiCN	Non-Coated	Non-Coated	TiAlN / Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	Available	-	-	-	-	Available	-	-	-	-	Available	-	-	-	-	-	-	Available	Available	Available	-	Available	Available	Available	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	-	-	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	Straight	Straight	-	-	-	Straight	Straight	Straight	Straight	Straight	-	-	Straight	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…