(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
391 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)
OSG
V coated powder metal high-speed steel XPM keyway end mill.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 5 ~ 15 | 6 ~ 12 | 2 | 50 ~ 70 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | - | Square | Weak torsion (15 to 25˚) | - | Powder high-speed steel | - | Straight |
From: 1,456,667 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
XPM End Mill (2-Flute Long Type) XPM-EDL
OSG
2-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 40 | 15 ~ 110 | 6 ~ 32 | 2 | 65 ~ 210 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Powder high-speed steel | - | Straight |
From: 1,053,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
XPM Long Shank, Short, Fine Pitch Type VLS-XPM-RESF
OSG
[Features]· Powdered V coating high-speed steel XPM roughing.· Blade shaped to emphasize chip discharge performance.· Those with outer diameter of 32 mm or more have center holes.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 11 ~ 75 | 6 ~ 42 | 3 ~ 6 | 80 ~ 210 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | - | Roughing | Weak torsion (15 to 25˚) | - | Powder high-speed steel | - | Straight |
From: 2,378,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 15 ~ 120 | 6 ~ 42 | 2 | 53 ~ 215 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove / Plunging (Z feed) | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 598,814 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 60 | 30 ~ 300 | 6 ~ 42 | 4 | 70 ~ 400 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 72,392 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3S End Mill, 6-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 ~ 60 | 150 ~ 300 | 42 | 6 | 245 ~ 400 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 22,038,100 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 20 ~ 250 | 6 ~ 42 | 2 | 60 ~ 345 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Plane / Side | Non-Coated | Square | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 493,471 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 60 | 10 ~ 85 | 6 ~ 42 | 4 | 50 ~ 185 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 412,127 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SSM S Coated Estech Muscle 3-Flute Regular
SANKO MFG
[Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 30 | 15 ~ 55 | 8 ~ 32 | 3 | 65 ~ 150 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Plane / Side / Groove / Inclined Cuts | TiCN | Square | Powerful Torsion (45°-60°) | Available | Powder high-speed steel | 17 ~ 65 | - |
From: 1,013,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANKO MFG
Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 40 | 10 ~ 65 | 6 ~ 32 | 4 ~ 6 | 70 ~ 185 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Plane / Side / Groove / Inclined Cuts | TiCN | Roughing | Standard torsion (30-40°) | Available | Powder high-speed steel | - | - |
From: 1,203,727 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SSα L S Coated Estech α Nick Long Blade
SANKO MFG
[Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables deep engraving, due to the long flute length.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 30 ~ 150 | 6 ~ 42 | 4 ~ 6 | 80 ~ 250 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Plane / Side / Groove | TiCN | Roughing | Standard torsion (30-40°) | Available | Powder high-speed steel | - | - |
From: 1,833,730 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
S-αL S-Coated Alpha Nick Long Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
14 ~ 50 | 65 ~ 200 | 16 ~ 42 | 4 ~ 6 | 145 ~ 320 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | Plane / Side / Groove | TiCN | Roughing | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 4,034,521 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 50 | 8 ~ 75 | 6 ~ 42 | 4 ~ 6 | 55 ~ 165 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Roughing | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 760,406 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ultra Long End Mill with 4 Flutes EXLE4
EIKOSHA
[Features]· It is a ultra-long 4-flute type with 45° high torsion angle.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
20 ~ 50 | 100 ~ 250 | 20 ~ 42 | 4 | 180 ~ 350 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Countersinking | Non-Coated | Square | Powerful Torsion (45°-60°) | Available | Cobalt HSS | - | - |
From: 5,747,752 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 30 | 13 ~ 45 | 6 ~ 25 | 3 ~ 5 | 57 ~ 121 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | Roughing | Powerful Torsion (45°-60°) | Available | Powder high-speed steel | - | - |
From: 1,102,251 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 32 | 13 ~ 53 | 6 ~ 32 | 3 ~ 6 | 57 ~ 133 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | Roughing | Standard torsion (30-40°) | Available | Powder high-speed steel | - | - |
From: 1,028,851 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]·High-speed steel roughing uncoated regular flute length type with optimum pitch width for coarse finishing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 19 ~ 112 | 6 ~ 42 | 3 ~ 6 | 63 ~ 214 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Roughing | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 714,399 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
MISUMI
[Features]·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 15 ~ 50 | 8 ~ 25 | 3 | 65 ~ 140 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Square | Powerful Torsion (45°-60°) | Available | Powder high-speed steel | - | - |
From: 814,907 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square short flute length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 50 | 2.5 ~ 75 | 6 ~ 42 | 2 | 45 ~ 165 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Countersinking | Non-Coated | Square | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 290,681 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]·Uncoated 4-flute long flute length type·Effective for side milling with 40° helix angle, which is stronger than standard helix angle·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 40 | 15 ~ 110 | 6 ~ 32 | 4 | 60 ~ 195 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Countersinking | Non-Coated | Square | Standard torsion (30-40°) | Available | Cobalt HSS | - | - |
From: 424,343 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.5 ~ 50 | 7 ~ 70 | 6 ~ 42 | 4 | 50 ~ 160 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | TiN | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 659,797 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 15 ~ 145 | 6 ~ 42 | 4 ~ 6 | 60 ~ 230 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Side / Groove | TiAlN | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 1,004,450 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
G Medium End Mill, 2-Flute 2MGE
NACHI(FUJIKOSHI)
General purpose coated end mill.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 8 | 15 ~ 20 | 8 ~ 10 | 2 | 60 ~ 65 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | TiN | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 454,500 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | 6 ~ 20 | 2 | 50 ~ 110 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 463,471 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 9 ~ 70 | 6 ~ 42 | 4 ~ 6 | 50 ~ 160 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Side / Groove | Non-Coated | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 776,873 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 15 ~ 70 | 6 ~ 42 | 4 ~ 6 | 60 ~ 160 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Side / Groove | Non-Coated | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 1,036,910 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
G Long End Mill, 4-Flute SL4GE
NACHI(FUJIKOSHI)
General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 40 | 15 ~ 125 | 6 ~ 32 | 4 | 60 ~ 210 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | TiN | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | - |
From: 744,190 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Type, 4-Flute Multi-Flute Center Cut CC-EMS
OSG
Cobalt high-speed steel center cut.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.5 ~ 40 | 10 ~ 65 | 6 ~ 32 | 4 | 50 ~ 150 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 603,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
End Mill (Multi-Flute Center Cut Long Type) CC-EML
OSG
General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 40 | 15 ~ 110 | 6 ~ 32 | 4 | 60 ~ 195 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 728,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
End Mill (Multi-Flute Long Shank Long Type) LS-EML
OSG
General-purpose 4-flute long shank end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
10 ~ 40 | 45 ~ 110 | 10 ~ 32 | 4 | 125 ~ 285 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 1,235,000 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (2-flute long type) V-XPM-EDL
OSG
Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 15 ~ 90 | 6 ~ 25 | 2 | 65 ~ 180 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | - | Square | Standard torsion (30-40°) | - | Powder high-speed steel | - | Straight |
From: 1,416,667 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS
OSG
Slim shank type with cutting diameter set to minus 1 mm. The tool runout can be adjusted freely.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 15 ~ 50 | 5 ~ 24 | 4 | 85 ~ 160 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | - | Square | Standard torsion (30-40°) | - | Powder high-speed steel | - | Straight |
From: 1,513,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS
OSG
Long shank type 4-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 ~ 50 | 20 ~ 75 | 6 ~ 42 | 4 | 80 ~ 350 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Powder high-speed steel | - | Straight |
From: 1,266,667 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (high-helix short type) V-XPM-EHS
OSG
High torsion type with great sharpness. Can be used for a wide range of applications from heavy cutting to finishing cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 6 ~ 55 | 6 ~ 32 | 3 ~ 4 | 55 ~ 150 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | - | Square | Powerful Torsion (45°-60°) | - | Powder high-speed steel | - | Straight |
From: 1,326,667 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Multi-Flute Extra Long Type EXML
OSG
30 to 45° helix angle cobalt high-speed steel, extra long type end mill.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 40 | 30 ~ 150 | 6 ~ 32 | 4 | 70 ~ 235 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 1,091,667 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Roughing Extra Long Type EX-REXL
OSG
General-purpose heavy-cutting roughing end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
10 ~ 50 | 50 ~ 212 | 10 ~ 42 | 4 ~ 6 | 120 ~ 315 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove | Non-Coated | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 3,151,231 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short fine pitch type EX-TIN-RESF
OSG
Roughing end mill short blade series with TiN coating for heavy cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 13 ~ 75 | 6 ~ 42 | 4 ~ 6 | 57 ~ 177 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove | TiN | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 1,760,000 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG
General-purpose heavy-cutting roughing end mill short type using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 50 | 13 ~ 75 | 6 ~ 42 | 4 ~ 6 | 57 ~ 177 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove | Non-Coated | Roughing | Standard torsion (30-40°) | - | Cobalt HSS | - | Straight |
From: 1,173,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
Rough and Finish End Mill (Long Type) RFEL
OSG
The rough and finish end mill adopts a unique trapezoidal flute shape that takes into consideration both heavy cutting and finish cutting, and has offset notches along the cutting edge as well as edge strength that can withstand heavy cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
20 ~ 50 | 106 ~ 212 | 20 ~ 42 | 4 ~ 6 | 180 ~ 315 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove | Non-Coated | Roughing | Weak torsion (15 to 25˚) | - | Cobalt HSS | - | Straight |
From: 8,358,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute (Standard Blade)
FUKUDA
Wide range of blade lengths and an abundance of sizes
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 100 | 2 ~ 80 | 6 ~ 42 | 2 | 42 ~ 180 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove / Plunging (Z feed) | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 504,388 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUKUDA
An end mill with a long shank for deep engraving.[Features]·The length of the blade is the same as that of a long blade, providing excellent workability.·A wide range of blade diameters from 3 to 50 mm is available.·Materials: HSS-Co (SKH56).·Lead angle: Right twist 30°.·Blade diameter tolerance: 0 to -0.03.[Applications]·Optimal for processing deep holes and deep engraving.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 30 ~ 120 | 6 ~ 42 | 2 | 100 ~ 300 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove / Plunging (Z feed) | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 843,730 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute (Standard Blade)
FUKUDA
Side cutting and groove re-polishing are easy
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 100 | 13 ~ 80 | 6 ~ 42 | 4 | 51 ~ 180 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 523,274 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 50 | 20 ~ 125 | 6 ~ 42 | 4 | 58 ~ 220 | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Plane / Side / Groove | Non-Coated | Square | Standard torsion (30-40°) | Available | Alloy HSS | - | - |
From: 655,272 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
General-purpose 2-flute keyway end mill with a cutting diameter tolerance of 0 to -0.02.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 5 ~ 25 | 6 ~ 25 | 2 | 50 ~ 95 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Weak torsion (15 to 25˚) | - | Cobalt HSS | - | Straight |
From: 598,333 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG
General-purpose 2-flute keyway end mill with a cutting diameter tolerance of -0.04 to -0.06.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Machining Application | Coating | Blade shape type | Torsion Angle (θ) | Base Blade Y/N | Tool Material Type | Underneck length (ℓ1)(mm) | shank |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 5 ~ 25 | 6 ~ 25 | 2 | 50 ~ 95 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Plane / Side / Groove / Inclined Cuts | Non-Coated | Square | Weak torsion (15 to 25˚) | - | Cobalt HSS | - | Straight |
From: 760,000 VND |
---|
Days to Ship: Số ngày giao hàng: 17 Day(s) |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Machining Application |
Coating |
Blade shape type |
Torsion Angle (θ) |
Base Blade Y/N |
Tool Material Type |
Underneck length (ℓ1)(mm) |
shank |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | OSG | FUKUDA | FUKUDA | FUKUDA | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | EIKOSHA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUKUDA | FUKUDA | FUKUDA | FUKUDA | OSG | OSG |
Product SeriesDòng sản phẩm | V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1) | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS | |||||||||||||||||||||||||||||||||||||
From | 1,456,667 VND | 1,053,333 VND | 2,378,333 VND | 598,814 VND | 72,392 VND | 22,038,100 VND | 493,471 VND | 412,127 VND | 1,013,800 VND | 1,203,727 VND | 1,833,730 VND | 4,034,521 VND | 760,406 VND | 5,747,752 VND | 1,102,251 VND | 1,028,851 VND | 714,399 VND | 814,907 VND | 290,681 VND | 424,343 VND | 659,797 VND | 1,004,450 VND | 454,500 VND | 463,471 VND | 776,873 VND | 1,036,910 VND | 744,190 VND | 603,333 VND | 728,333 VND | 1,235,000 VND | 1,416,667 VND | 1,513,333 VND | 1,266,667 VND | 1,326,667 VND | 1,091,667 VND | 3,151,231 VND | 1,760,000 VND | 1,173,333 VND | 8,358,333 VND | 504,388 VND | 843,730 VND | 523,274 VND | 655,272 VND | 598,333 VND | 760,000 VND |
Days to ShipSố ngày giao hàng | 15 Day(s) | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 8 Day(s) or more | 17 Day(s) | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) | 17 Day(s) |
SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | 3 ~ 12 | 3 ~ 40 | 6 ~ 50 | 3 ~ 50 | 3 ~ 60 | 50 ~ 60 | 3 ~ 50 | 3 ~ 60 | 6 ~ 30 | 5 ~ 40 | 6 ~ 50 | 14 ~ 50 | 5 ~ 50 | 20 ~ 50 | 6 ~ 30 | 5 ~ 32 | 6 ~ 50 | 6 ~ 25 | 1 ~ 50 | 3 ~ 40 | 2.5 ~ 50 | 3 ~ 50 | 6 ~ 8 | 1 ~ 20 | 3 ~ 50 | 6 ~ 50 | 3 ~ 40 | 2.5 ~ 40 | 3 ~ 40 | 10 ~ 40 | 3 ~ 30 | 6 ~ 25 | 8 ~ 50 | 3 ~ 30 | 3 ~ 40 | 10 ~ 50 | 6 ~ 50 | 6 ~ 50 | 20 ~ 50 | 0.8 ~ 100 | 3 ~ 50 | 3 ~ 100 | 3 ~ 50 | 3 ~ 25 | 3 ~ 25 |
Blade length (ℓ)(mm) | 5 ~ 15 | 15 ~ 110 | 11 ~ 75 | 15 ~ 120 | 30 ~ 300 | 150 ~ 300 | 20 ~ 250 | 10 ~ 85 | 15 ~ 55 | 10 ~ 65 | 30 ~ 150 | 65 ~ 200 | 8 ~ 75 | 100 ~ 250 | 13 ~ 45 | 13 ~ 53 | 19 ~ 112 | 15 ~ 50 | 2.5 ~ 75 | 15 ~ 110 | 7 ~ 70 | 15 ~ 145 | 15 ~ 20 | 2 ~ 40 | 9 ~ 70 | 15 ~ 70 | 15 ~ 125 | 10 ~ 65 | 15 ~ 110 | 45 ~ 110 | 15 ~ 90 | 15 ~ 50 | 20 ~ 75 | 6 ~ 55 | 30 ~ 150 | 50 ~ 212 | 13 ~ 75 | 13 ~ 75 | 106 ~ 212 | 2 ~ 80 | 30 ~ 120 | 13 ~ 80 | 20 ~ 125 | 5 ~ 25 | 5 ~ 25 |
Shank diameter (d)(mm) | 6 ~ 12 | 6 ~ 32 | 6 ~ 42 | 6 ~ 42 | 6 ~ 42 | 42 | 6 ~ 42 | 6 ~ 42 | 8 ~ 32 | 6 ~ 32 | 6 ~ 42 | 16 ~ 42 | 6 ~ 42 | 20 ~ 42 | 6 ~ 25 | 6 ~ 32 | 6 ~ 42 | 8 ~ 25 | 6 ~ 42 | 6 ~ 32 | 6 ~ 42 | 6 ~ 42 | 8 ~ 10 | 6 ~ 20 | 6 ~ 42 | 6 ~ 42 | 6 ~ 32 | 6 ~ 32 | 6 ~ 32 | 10 ~ 32 | 6 ~ 25 | 5 ~ 24 | 6 ~ 42 | 6 ~ 32 | 6 ~ 32 | 10 ~ 42 | 6 ~ 42 | 6 ~ 42 | 20 ~ 42 | 6 ~ 42 | 6 ~ 42 | 6 ~ 42 | 6 ~ 42 | 6 ~ 25 | 6 ~ 25 |
Number of flutes(sheet) | 2 | 2 | 3 ~ 6 | 2 | 4 | 6 | 2 | 4 | 3 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 4 | 3 ~ 5 | 3 ~ 6 | 3 ~ 6 | 3 | 2 | 4 | 4 | 4 ~ 6 | 2 | 2 | 4 ~ 6 | 4 ~ 6 | 4 | 4 | 4 | 4 | 2 | 4 | 4 | 3 ~ 4 | 4 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 4 ~ 6 | 2 | 2 | 4 | 4 | 2 | 2 |
Overall Length (L)(mm) | 50 ~ 70 | 65 ~ 210 | 80 ~ 210 | 53 ~ 215 | 70 ~ 400 | 245 ~ 400 | 60 ~ 345 | 50 ~ 185 | 65 ~ 150 | 70 ~ 185 | 80 ~ 250 | 145 ~ 320 | 55 ~ 165 | 180 ~ 350 | 57 ~ 121 | 57 ~ 133 | 63 ~ 214 | 65 ~ 140 | 45 ~ 165 | 60 ~ 195 | 50 ~ 160 | 60 ~ 230 | 60 ~ 65 | 50 ~ 110 | 50 ~ 160 | 60 ~ 160 | 60 ~ 210 | 50 ~ 150 | 60 ~ 195 | 125 ~ 285 | 65 ~ 180 | 85 ~ 160 | 80 ~ 350 | 55 ~ 150 | 70 ~ 235 | 120 ~ 315 | 57 ~ 177 | 57 ~ 177 | 180 ~ 315 | 42 ~ 180 | 100 ~ 300 | 51 ~ 180 | 58 ~ 220 | 50 ~ 95 | 50 ~ 95 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Groove | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | - | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiN | TiAlN | TiN | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | - | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
Blade shape type | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Square | Roughing | Roughing | Roughing | Square | Square | Square | Square | Roughing | Square | Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square |
Torsion Angle (θ) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) |
Base Blade Y/N | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | Available | Available | Available | - | - |
Tool Material Type | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Alloy HSS | Alloy HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Cobalt HSS | Cobalt HSS |
Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | 17 ~ 65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
shank | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | Straight | Straight |
Loading...Tải…
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy